try using list for Jv instead of datapair - has been seen to cause memory leaks

- allow vector containing values in the inactive set to be passed (not just nC in length)

.bumpversion.cfg

@@ -1,4 +1,4 @@
 [bumpversion]
-current_version = 0.1.4
+current_version = 0.1.10
 files = setup.py SimPEG/__init__.py docs/conf.py
 

.travis.yml

@@ -16,12 +16,14 @@ addons:
 
 env:
     - TEST_DIR="tests/mesh tests/base tests/utils"
-    - TEST_DIR=tests/examples
-    - TEST_DIR=tests/em/fdem/forward
     - TEST_DIR=tests/em/fdem/inverse/derivs
-    - TEST_DIR=tests/em/fdem/inverse/adjoint
     - TEST_DIR=tests/em/tdem
+    - TEST_DIR=tests/dcip
     - TEST_DIR=tests/flow
+    - TEST_DIR=tests/mt
+    - TEST_DIR=tests/examples
+    - TEST_DIR=tests/em/fdem/inverse/adjoint
+    - TEST_DIR=tests/em/fdem/forward
 
 # Setup anaconda
 before_install:
@@ -33,7 +35,7 @@ before_install:
 
 # Install packages
 install:
-  - conda install --yes pip python=$TRAVIS_PYTHON_VERSION numpy scipy matplotlib cython ipython nose
+  - conda install --yes pip python=$TRAVIS_PYTHON_VERSION numpy scipy matplotlib cython ipython nose vtk
   - pip install nose-cov python-coveralls
 
   - git clone https://github.com/rowanc1/pymatsolver.git
@@ -54,3 +56,5 @@ notifications:
   email:
     - rowanc1@gmail.com
     - lindseyheagy@gmail.com
+    - gkrosen@gmail.com
+    - sgkang09@gmail.com

AUTHORS.rst

@@ -1,9 +1,13 @@
-- Luz Angelica Caudillo-Mata, (`@lacmajedrez <https://github.com/lacmajedrez/>`_)
 - Rowan Cockett, (`@rowanc1 <https://github.com/rowanc1/>`_)
-- Eldad Haber, (`@ehaber99 <https://github.com/ehaber99/>`_)
 - Lindsey Heagy, (`@lheagy <https://github.com/lheagy/>`_)
 - Seogi Kang, (`@sgkang <https://github.com/sgkang/>`_)
-- Dave Marchant, (`@dwfmarchant <https://github.com/dwfmarchant/>`_)
+- Brendan Smithyman, (`@bsmithyman <https://github.com/bsmithyman/>`_)
 - Gudni Rosenkjaer, (`@grosenkj <https://github.com/grosenkj/>`_)
+- Dom Fournier, (`@fourndo <https://github.com/fourndo/>`_)
+- Dave Marchant, (`@dwfmarchant <https://github.com/dwfmarchant/>`_)
 - Lars Ruthotto, (`@lruthotto <https://github.com/lruthotto/>`_)
 - Mike Wathen, (`@mrwathen <https://github.com/mrwathen/>`_)
+- Luz Angelica Caudillo-Mata, (`@lacmajedrez <https://github.com/lacmajedrez/>`_)
+- Eldad Haber, (`@ehaber99 <https://github.com/ehaber99/>`_)
+- Doug Oldenburg, (`@dougoldenburg <https://github.com/dougoldenburg/>`_)
+- Adam Pidlisecky, (`@aPid1 <https://github.com/aPid1/>`_)

CITATION.rst

@@ -1,14 +1,13 @@
 Citing SimPEG
-=============
+-------------
 
-There is a paper about SimPEG!
+There is a `paper about SimPEG <http://dx.doi.org/10.1016/j.cageo.2015.09.015>`_, if you use this code, please help our scientific visibility by citing our work!
 
 
     Cockett, R., Kang, S., Heagy, L. J., Pidlisecky, A., & Oldenburg, D. W. (2015). SimPEG: An open source framework for simulation and gradient based parameter estimation in geophysical applications. Computers & Geosciences.
 
 
 BibTex:
--------
 
 .. code::
 

GCEtools/PETScIO.py

@@ -1,470 +0,0 @@
-#!/usr/bin/python
-"""
-Input and output functions.
-"""
-
-
-import os as _os
-import errno as _errno
-import sys as _sys
-import numpy as _np
-
-from petsc4py import PETSc as _PETSc
-import fileinput as _fl
-
-def vecToArray(obj):
-    """ Converts a PETSc vector to a numpy array, available on *all* MPI nodes.
-
-        Args:
-            obj (petsc4py.PETSc.Vec): input vector.
-
-        Returns:
-            numpy.array :
-        """
-    # scatter vector 'obj' to all processes
-    comm = obj.getComm()
-    scatter, obj0 = _PETSc.Scatter.toAll(obj)
-    scatter.scatter(obj, obj0, False, _PETSc.Scatter.Mode.FORWARD)
-
-    return _np.asarray(obj0)
-
-    # deallocate
-    comm.barrier()
-    scatter.destroy()
-    obj0.destroy()
-
-
-def vecToArray0(obj):
-    """ Converts a PETSc vector to a numpy array available on MPI node 0.
-
-        Args:
-            obj (petsc4py.PETSc.Vec): input vector.
-
-        Returns:
-            numpy.array :
-        """
-    # scatter vector 'obj' to process 0
-    comm = obj.getComm()
-    rank = comm.getRank()
-    scatter, obj0 = _PETSc.Scatter.toZero(obj)
-    scatter.scatter(obj, obj0, False, _PETSc.Scatter.Mode.FORWARD)
-
-    if rank == 0:   return _np.asarray(obj0)
-
-    # deallocate
-    comm.barrier()
-    scatter.destroy()
-    obj0.destroy()
-
-
-def arrayToVec(vecArray):
-    """ Converts a (global) array to a PETSc vector over :attr:`petsc4py.PETSc.COMM_WORLD`.
-
-        Args:
-            vecArray (array or numpy.array): input vector.
-
-        Returns:
-            petsc4py.PETSc.Vec() :
-        """
-    vec = _PETSc.Vec().create(comm=_PETSc.COMM_WORLD)
-    vec.setSizes(len(vecArray))
-    vec.setUp()
-    (Istart,Iend) = vec.getOwnershipRange()
-    return vec.createWithArray(vecArray[Istart:Iend],
-            comm=_PETSc.COMM_WORLD)
-    vec.destroy()
-
-
-def arrayToMat(matArray):
-    """ Converts a (global) 2D array to a PETSc matrix over :attr:`petsc4py.PETSc.COMM_WORLD`.
-
-        Args:
-            matArray (array or numpy.array): input square array.
-
-        :rtype: petsc4py.PETSc.Mat()
-
-        .. important::
-            Requires `SciPy <http://www.scipy.org>`_.
-
-        """
-    try:
-        import scipy.sparse as sparse
-    except:
-        print '\nERROR: loading matrices from txt files requires Scipy!'
-        return
-
-    matSparse =matArray
-
-    mat = _PETSc.Mat().createAIJ(size=matSparse.shape,comm=_PETSc.COMM_WORLD)
-    (Istart,Iend) = mat.getOwnershipRange()
-
-    ai = matSparse.indptr[Istart:Iend+1] - matSparse.indptr[Istart]
-    aj = matSparse.indices[matSparse.indptr[Istart]:matSparse.indptr[Iend]]
-    av = matSparse.data[matSparse.indptr[Istart]:matSparse.indptr[Iend]]
-
-    mat.setValuesCSR(ai,aj,av)
-    mat.assemble()
-
-    return mat
-    mat.destroy()
-
-def matToSparse(mat):
-    """ Converts a PETSc matrix to a (global) sparse matrix.
-
-        Args:
-            mat (petsc4py.PETSc.Mat): input PETSc matrix.
-
-        :rtype: scipy.sparse.csr_matrix
-
-        .. important::
-            Requires `SciPy <http://www.scipy.org>`_.
-
-        """
-    import scipy.sparse as sparse
-
-    data = mat.getValuesCSR()
-
-    (Istart,Iend) = mat.getOwnershipRange()
-    columns = mat.getSize()[0]
-    sparseSubMat = sparse.csr_matrix(data[::-1],shape=(Iend-Istart,columns))
-
-    comm = _PETSc.COMM_WORLD
-
-    sparseSubMat = comm.tompi4py().allgather(sparseSubMat)
-
-    return sparse.vstack(sparseSubMat)
-
-def adjToH(adj,d=[0],amp=[0.]):
-    """ Creates a 1 particle PETSc-type Hamiltonian matrix from a PETSc adjacency matrix.
-
-        Args:
-            adj (petsc4py.PETSc.Mat): input PETSc-type adjacency matrix.
-
-            d (array of ints): an array containing *integers* indicating the nodes
-                        where diagonal defects are to be placed (e.g. ``d=[0,1,4]``).
-
-            amp (array of floats):   an array containing *floats* indicating the diagonal defect
-                        amplitudes corresponding to each element in ``d`` (e.g. ``amp=[0.5,-1,4.2]``).
-
-        Returns:
-             : 1 particle Hamiltonian matrix
-        :rtype: petsc4py.PETSc.Mat()
-
-        Warning:
-            * The size of ``a`` and ``d`` must be identical
-
-                >>> amp = [0.5,-1.,4.2]
-                >>> len(d) == len(amp)
-                True
-
-            * Elements of ``d`` can range from :math:`[0,N-1]` where the adjacency matrix is :math:`N\\times N`.
-
-        """
-    (Istart,Iend) = adj.getOwnershipRange()
-    diagSum = []
-    for i in range(Istart,Iend):
-        diagSum.append(_np.sum(adj.getRow(i)[-1]))
-        for j,val in enumerate(d):
-            if i==val:  diagSum[i-Istart] += amp[j]
-
-    mat = _PETSc.Mat().create(comm=_PETSc.COMM_WORLD)
-    mat.setSizes(adj.getSize())
-    mat.setUp()
-
-    for i in range(Istart,Iend):
-        mat.setValue(i,i,diagSum[i-Istart])
-
-    mat.assemble()
-    mat.axpy(-1,adj)
-
-    return mat
-    mat.destroy()
-
-#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#---------------------- Vec I/O functions ---------------------------
-#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-def exportVec(vec,filename,filetype):
-    """ Export a PETSc vector to a file.
-
-        Args:
-            vec (petsc4py.PETSc.Vec): input vector.
-            filename (str): path to desired output file.
-            filetype (str): the filetype of the exported vector.
-
-                            * ``'txt'`` - a column vector in text format.
-                            * ``'bin'`` - a PETSc binary vector.
-        """
-    if _os.path.isabs(filename):
-        outDir = _os.path.dirname(filename)
-    else:
-        outDir = './'+_os.path.dirname(filename)
-
-    # create output directory if it doesn't exist
-    try:
-        _os.mkdir(outDir)
-    except OSError as exception:
-        if exception.errno != _errno.EEXIST:
-            raise
-
-    if filetype == 'txt':
-        # scatter prob to process 0
-        comm = vec.getComm()
-        rank = comm.getRank()
-        scatter, vec0 = _PETSc.Scatter.toZero(vec)
-        scatter.scatter(vec, vec0, False, _PETSc.Scatter.Mode.FORWARD)
-
-        # use process 0 to write to text file
-        if rank == 0:
-            array0 = _np.asarray(vec0)
-            with open(filename,'w') as f:
-                for i in range(len(array0)):
-                    f.write('{0: .12e}\n'.format(array0[i]))
-
-        # deallocate
-        comm.barrier()
-        scatter.destroy()
-        vec0.destroy()
-
-    elif filetype == 'bin':
-        binSave = _PETSc.Viewer().createBinary(filename, 'w')
-        binSave(vec)
-        binSave.destroy()
-
-    vec.comm.barrier()
-
-def loadVec(filename,filetype):
-    """ Import a PETSc vector from a file.
-
-        Args:
-            filename (str): path to input file.
-            filetype (str): the filetype.
-
-                            * ``'txt'`` - a column vector in text format.
-                            * ``'bin'`` - a PETSc binary vector.
-        """
-    if filetype == 'txt':
-        try:
-            vecArray = _np.loadtxt(filename,dtype=_PETSc.ScalarType)
-            return arrayToVec(vecArray)
-        except:
-            print "\nERROR: input state space file " + filename\
-                + " does not exist or is in an incorrect format"
-            _sys.exit()
-
-    elif filetype == 'bin':
-        binLoad = _PETSc.Viewer().createBinary(filename, 'r')
-        try:
-            return _PETSc.Vec().load(binLoad)
-        except:
-            print "\nERROR: input state space file " + filename\
-                + " does not exist or is in an incorrect format"
-            _sys.exit()
-        binLoad.destroy()
-
-#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#---------------------- Mat I/O functions ---------------------------
-#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-def exportMat(mat,filename,filetype,mattype=None):
-    """ Export a PETSc matrix to a file.
-
-        Args:
-            mat (petsc4py.PETSc.Mat): input matrix.
-            filename (str): path to desired output file.
-            filetype (str): the filetype of the exported vector.
-
-                            * ``'txt'`` - a 2D matrix array in text format.
-                            * ``'bin'`` - a PETSc binary matrix.
-            mattype (str): (``None``,``'adj'``) - if set to ``adj``, only
-                            integers ``0`` and ``1`` are written. Note
-                            that this only applied in ``txt`` mode.
-        """
-    rank = _PETSc.Comm.Get_rank(_PETSc.COMM_WORLD)
-
-    if _os.path.isabs(filename):
-        outDir = _os.path.dirname(filename)
-    else:
-        outDir = './'+_os.path.dirname(filename)
-
-    # create output directory if it doesn't exist
-    try:
-        _os.mkdir(outDir)
-    except OSError as exception:
-        if exception.errno != _errno.EEXIST:
-            raise
-
-    if filetype == 'txt':
-        txtSave = _PETSc.Viewer().createASCII(filename, 'w',
-            format=_PETSc.Viewer.Format.ASCII_DENSE, comm=_PETSc.COMM_WORLD)
-        txtSave(mat)
-        txtSave.destroy()
-
-        if rank == 0:
-            for line in _fl.FileInput(filename,inplace=1):
-                if line[2] != 't':
-                    if mattype == 'adj':
-                        line = line.replace(" i","j")
-                        line = line.replace(" -","-")
-                        line = line.replace("+-","-")
-                        line = line.replace("0000e+01+0.00000e+00j","")
-                        line = line.replace(".00000e+00+0.00000e+00j","")
-                        line = line.replace(".","")
-                        line = line.replace(" -","\t-")
-                        line = line.replace("  ","\t")
-                        line = line.replace(" ","")
-                        line = line.replace("\t"," ")
-                        print line,
-                    else:
-                        line = line.replace(" i","j")
-                        line = line.replace(" -","-")
-                        line = line.replace("+-","-")
-                        print line,
-
-    elif filetype == 'bin':
-        binSave = _PETSc.Viewer().createBinary(filename, 'w', comm=_PETSc.COMM_WORLD)
-        binSave(mat)
-        binSave.destroy()
-
-    mat.comm.barrier()
-
-def loadMat(filename,filetype,delimiter=None):
-    """ Import a PETSc matrix from a file.
-
-        Args:
-            filename (str): path to input file.
-            filetype (str): the filetype.
-
-                            * ``'txt'`` - a 2D matrix array in text format.
-                            * ``'bin'`` - a PETSc matrix vector.
-
-            delimiter (str): this is passed to `numpy.genfromtxt\
-                <http://docs.scipy.org/doc/numpy/reference/generated/numpy.genfromtxt.html>`_
-                in the case of strange delimiters in an imported ``txt`` file.
-        """
-    if filetype == 'txt':
-        try:
-            try:
-                if delimiter is None:
-                    matArray = _np.genfromtxt(filename,dtype=_PETSc.ScalarType)
-                else:
-                    matArray = _np.genfromtxt(filename,dtype=_PETSc.ScalarType,delimiter=delimiter)
-            except:
-                filefix = []
-                for line in _fl.FileInput(filename,inplace=0):
-                    if line[2] != 't':
-                        line = line.replace(" i","j")
-                        line = line.replace(" -","-")
-                        line = line.replace("+-","-")
-                        filefix.append(line)
-
-                matArray = _np.genfromtxt(filefix,dtype=_PETSc.ScalarType)
-
-            return arrayToMat(matArray)
-        except:
-            print "\nERROR: input state space file " + filename\
-                + " does not exist or is in an incorrect format"
-            _sys.exit()
-
-    elif filetype == 'bin':
-        binLoad = _PETSc.Viewer().createBinary(filename, 'r')
-        try:
-            return _PETSc.Mat().load(binLoad)
-        except:
-            print "\nERROR: input state space file " + filename\
-                + " does not exist or is in an incorrect format"
-            _sys.exit()
-        binLoad.destroy()
-
-def exportVecToMat(vec,filename,filetype):
-    """ Export a :math:`N^2` element PETSc vector as a :math:`N\\times N` matrix.
-
-        This is useful when wanting to view the full statespace of a 2 particle
-        quantum walk.
-
-        Args:
-            vec (petsc4py.PETSc.Vec): input :math:`N^2` element vector.
-            filename (str): path to desired output file.
-            filetype (str): the filetype of the exported vector.
-
-                            * ``'txt'`` - an :math:`N\\times N` 2D matrix array in text format.
-                            * ``'bin'`` - an :math:`N\\times N` PETSc binary matrix.
-        """
-    rank = _PETSc.Comm.Get_rank(_PETSc.COMM_WORLD)
-
-    if _os.path.isabs(filename):
-        outDir = _os.path.dirname(filename)
-    else:
-        outDir = './'+_os.path.dirname(filename)
-
-    # create output directory if it doesn't exist
-    try:
-        _os.mkdir(outDir)
-    except OSError as exception:
-        if exception.errno != _errno.EEXIST:
-            raise
-
-    vecArray = vecToArray(vec)
-    matArray = vecArray.reshape([_np.sqrt(vecArray.size),_np.sqrt(vecArray.size)])
-
-    if filetype == 'txt':
-        #if rank == 0:  _np.savetxt(filename,matArray)
-        txtSave = _PETSc.Viewer().createASCII(filename, 'w',
-            format=_PETSc.Viewer.Format.ASCII_DENSE, comm=_PETSc.COMM_WORLD)
-        txtSave(arrayToMat(matArray))
-        txtSave.destroy()
-
-        if rank == 0:
-            for line in _fl.FileInput(filename,inplace=1):
-                if line[2] != 't':
-                    line = line.replace(" i","j")
-                    line = line.replace(" -","-")
-                    line = line.replace("+-","-")
-                    print line,
-
-    elif filetype == 'bin':
-        binSave = _PETSc.Viewer().createBinary(filename, 'w', comm=_PETSc.COMM_WORLD)
-        binSave(arrayToMat(matArray))
-        binSave.destroy()
-    vec.comm.barrier()
-
-
-def loadMatToVec(filename,filetype):
-    """ Load a :math:`N\\times N` matrix as a :math:`N^2` element PETSc vector.
-
-        This is useful when wanting to import the full statespace of a 2 particle
-        quantum walk to use for propagation.
-
-        Args:
-            filename (str): path to the input file.
-            filetype (str): the filetype
-
-                            * ``'txt'`` - an :math:`N\\times N` 2D matrix array in text format.
-                            * ``'bin'`` - **Not yet implemented! Please use a txt \
-                                         format for this type of import**.
-        """
-    if filetype == 'txt':
-        try:
-            try:
-                matArray = _np.loadtxt(filename,dtype=_PETSc.ScalarType)
-            except:
-                filefix = []
-                for line in _fl.FileInput(filename,inplace=0):
-                    if line[2] != 't':
-                        line = line.replace(" i","j")
-                        line = line.replace(" -","-")
-                        line = line.replace("+-","-")
-                        filefix.append(line)
-
-                matArray = _np.loadtxt(filefix,dtype=_PETSc.ScalarType)
-
-            vecArray = matArray.reshape(matArray.shape[0]**2)
-            return arrayToVec(vecArray)
-        except:
-            print "\nERROR: input state space file " + filename\
-                + " does not exist or is in an incorrect format"
-            _sys.exit()
-
-    elif filetype == 'bin':
-        print '\nERROR: only works for txt storage!'
-        _sys.exit()

GCEtools/gceStartup.txt

@@ -1,11 +0,0 @@
-# Check project status
-gcutil getproject --project=<ProjectName> --cache_flag_values
-
-# Start an instance
-gcutil addinstance <instanceName>
-
-# Log in 
-gcutil ssh <instanceName>
-
-# Shut down
-gcutil deleteinstance <instanceName>

GCEtools/petscStartup.sh

@@ -1,145 +0,0 @@
-#! /bin/bash
-
-locale-gen en_US en_US.UTF-8 hu_HU hu_HU.UTF-8 > output.t
-dpkg-reconfigure locales >> output.t
-
-sudo apt-get update  >> output.t
-echo " "
-echo " "
-echo "   ============================================"
-echo "   | Installing packages form package manager |"
-echo "   ============================================"
-echo " "
-echo " "
-
-sudo apt-get -y install aptitude >> output.t
-
-packages=(gcc gfortran git libopenmpi-dev python-pip python-dev git flex bison cmake vim cython ipython python-scipy python-numpy python-nose python-pip python-matplotlib python-vtk python-h5py libmumps-ptscotch-4.10.0 libmumps-ptscotch-dev libblas-dev liblapack-dev )
-
-
-for item in ${packages[*]}
-do
-    printf "     %-30s\n" $item
-
-done
-
-for item in ${packages[*]}
-do
-    tput cuu1
-done
-
-for item in ${packages[*]}
-do
-    sudo aptitude -y install $item >> output.t
-    printf "     %-30s              %-4s\n" $item done
-done
-
-
-echo " "
-echo " "
-echo "   ====================================="
-echo "   | Installing extra Python libraries |"
-echo "   ====================================="
-echo " "
-echo " "
-
-
-pipPackages=(mpi4py pymumps)
-
-for item in ${pipPackages[*]}
-do
-    printf "     %-30s\n" $item
-done
-
-for item in ${pipPackages[*]}
-do
-    tput cuu1
-done
-
-for item in ${pipPackages[*]}
-do
-        sudo pip install $item >> output.t
-        printf "     %-30s              %-4s\n" $item done
-done
-
-Upgrade=(scipy numpy ipython)
-
-for item in ${Upgrade[*]}
-do
-    printf "     %-8s%-7s\n" $item upgrade
-
-done
-
-for item in ${Upgrade[*]}
-do
-    tput cuu1
-done
-
-for item in ${Upgrade[*]}
-do
-    sudo pip install $item --upgrade >> output.t
-    printf "     %-8s%-7s                             %-4s\n" $item upgrade done
-done
-
-
-
-echo " "
-echo " "
-echo "   ====================="
-echo "   | Installing SimPEG |"
-echo "   ====================="
-echo " "
-echo " "
-cd ~
-
-
-git clone https://github.com/simpeg/simpeg.git >> output.t
-cd simpeg/SimPEG/
-python setup.py >> output.t
-cd ~
-
-mkdir petsc
-cd petsc
-
-echo " "
-echo " "
-echo "   ===================="
-echo "   | Installing PETSc |"
-echo "   ===================="
-echo " "
-echo " "
-wget http://ftp.mcs.anl.gov/pub/petsc/release-snapshots/petsc-3.4.3.tar.gz
-
-tar -zxf petsc-3.4.3.tar.gz
-
-cd petsc-3.4.3
-
-./configure --with-debugging=no  --dowload-mpich=yes --download-blacs=yes --download-f-blas-lapack=yes --download-scalapack=yes --download-mumps=yes --download-ml=yes --download-spooles=yes --download-hypre=yes --dowload-trilinos=yes --download-metis=yes --download-parmetis=yes --download-umfpack=yes --download-ptscotch=yes  --download-superlu=yes --download-superlu_dist=yes --download-essl=yes --download-eucild=yes  --download-spai=yes  --download-mpi4py=yes --download-petsc4py=yes --download-scientificpython=yes
-
-
-echo "export PETSC_DIR=/home/${USER}/petsc/petsc-3.4.3" >> ~/.bashrc
-echo "export PETSC_ARCH=arch-linux2-c-opt" >> ~/.bashrc
-export PETSC_DIR=/home/${USER}/petsc/petsc-3.4.3
-export PETSC_ARCH=arch-linux2-c-opt
-. ~/.bashrc
-
-make PETSC_DIR=/home/${USER}/petsc/petsc-3.4.3 PETSC_ARCH=arch-linux2-c-opt all
-make PETSC_DIR=/home/${USER}/petsc/petsc-3.4.3 PETSC_ARCH=arch-linux2-c-opt test
-
-cd ~/petsc
-echo " "
-echo " "
-echo "   ======================="
-echo "   | Installing PETSc4PY |"
-echo "   ======================="
-echo " "
-echo " "
-git clone https://bitbucket.org/petsc/petsc4py.git
-cd petsc4py/
-python setup.py build >> output.t
-python setup.py install --prefix=~/petsc >> output.t
-
-echo "export PYTHONPATH=~/petsc/lib/python2.7/site-packages:/home/$USER/simpeg:${PYTHONPATH}" >> ~/.bashrc
-
-cd ~
-source ~/.bashrc

GCEtools/startup.sh

@@ -1,22 +0,0 @@
-#! /bin/bash
-sudo aptitude -y update
-sudo aptitude -y upgrade
-sudo aptitude -y install gcc gfortran git libopenmpi-dev python-pip python-dev
-sudo aptitude -y install ipython python-scipy python-numpy python-nose python-pip python-matplotlib
-sudo aptitude -y install libmumps-ptscotch-4.10.0 libmumps-ptscotch-dev
-sudo aptitude -y install libblas-dev liblapack-dev
-
-sudo pip install mpi4py
-sudo pip install pymumps
-
-sudo pip install scipy --upgrade
-sudo pip install numpy --upgrade
-sudo pip install ipython --upgrade
-
-git clone https://github.com/simpeg/simpeg.git
-cd simpeg/SimPEG/
-python setup.py
-cd ~
-
-echo export PYTHONPATH=/home/$USER/simpeg/ >> .bashrc
-source .bashrc

LICENSE

@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2013-2015 SimPEG Developers
+Copyright (c) 2013-2016 SimPEG Developers
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of
 this software and associated documentation files (the "Software"), to deal in

PROJECTS.rst

@@ -1,36 +0,0 @@
-- Electromagnetics (`simpegEM <http://simpegem.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegem.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegem
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegem/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegem?branch=master
-- Potential Fields (`simpegPF <http://simpegpf.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegpf.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegpf
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegpf/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegpf?branch=master
-- Ground Water Flow (`simpegFLOW <http://simpegflow.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegflow.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegflow
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegflow/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegflow?branch=master
-- Direct Current Resistivity (`simpegDC <http://simpeg-dc.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegdc.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegdc
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegdc/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegdc?branch=master
-- Electromagnetics 1D (`simpegEM1D <http://simpegem1d.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegEM1D.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegEM1D
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegEM1D/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegEM1D?branch=master
-- Magnetotellurics (`simpegMT <http://simpegmt.rtfd.org/>`_)
-    .. image:: https://travis-ci.org/simpeg/simpegmt.svg?branch=master
-        :target: https://travis-ci.org/simpeg/simpegmt
-        :alt: Master Branch
-    .. image:: https://coveralls.io/repos/simpeg/simpegmt/badge.png?branch=master
-        :target: https://coveralls.io/r/simpeg/simpegmt?branch=master

README.rst

@@ -17,7 +17,7 @@ SimPEG
     :target: https://github.com/simpeg/simpeg/blob/master/LICENSE
     :alt: BSD 3 clause license.
 
-.. image:: https://img.shields.io/travis/simpeg/simpeg.svg
+.. image:: https://api.travis-ci.org/simpeg/simpeg.svg?branch=master
     :target: https://travis-ci.org/simpeg/simpeg
     :alt: Travis CI build status
 
@@ -25,6 +25,10 @@ SimPEG
     :target: https://coveralls.io/r/simpeg/simpeg?branch=master
     :alt: Coverage status
 
+.. image:: http://img.shields.io/badge/GITTER-JOIN_CHAT-brightgreen.svg?style=flat-square
+    :alt: gitter chat room at https://gitter.im/simpeg/simpeg
+    :target: https://gitter.im/simpeg/simpeg
+    
 Simulation and Parameter Estimation in Geophysics  -  A python package for simulation and gradient based parameter estimation in the context of geophysical applications.
 
 The vision is to create a package for finite volume simulation with applications to geophysical imaging and subsurface flow. To enable the understanding of the many different components, this package has the following features:

SimPEG/DCIP/BaseDC.py

@@ -0,0 +1,292 @@
+from SimPEG import *
+
+class FieldsDC_CC(Problem.Fields):
+    knownFields = {'phi_sol':'CC'}
+    aliasFields = {
+                    'phi' : ['phi_sol','CC','_phi'],
+                    'e' : ['phi_sol','F','_e'],
+                    'j' : ['phi_sol','F','_j']
+                  }
+
+    def __init__(self,mesh,survey,**kwargs):
+        super(FieldsDC_CC, self).__init__(mesh, survey, **kwargs)
+
+    def startup(self):
+        self._cellGrad = self.survey.prob.mesh.cellGrad
+        self._Mfinv = self.survey.prob.mesh.getFaceInnerProduct(invMat=True)
+
+    def _phi(self, phi_sol, srcList):
+        phi = phi_sol
+        # for i, src in enumerate(srcList):
+        #     phi_p = src.phi_p(self.survey.prob)
+        #     if phi_p is not None:
+        #         phi[:,i] += phi_p
+        return phi
+
+    def _e(self, phi_sol, srcList):
+        e = -self._cellGrad*phi_sol
+        # for i, src in enumerate(srcList):
+        #     e_p = src.e_p(self.survey.prob)
+        #     if e_p is not None:
+        #         e[:,i] += e_p
+        return e
+
+    def _j(self, phi_sol, srcList):
+
+        j = -self._Mfinv*self.survey.prob.Msig*self._cellGrad*phi_sol
+        # for i, src in enumerate(srcList):
+        #     j_p = src.j_p(self.survey.prob)
+        #     if j_p is not None:
+        #         j[:,i] += j_p
+        return j
+
+
+
+class SrcDipole(Survey.BaseSrc):
+    """A dipole source, locA and locB are moved to the closest cell-centers"""
+
+    current = 1
+    loc  = None
+    # _rhsDict = None
+
+    def __init__(self, rxList, locA, locB, **kwargs):
+        self.loc = (locA, locB)
+        super(SrcDipole, self).__init__(rxList, **kwargs)
+
+    def eval(self, prob):
+        # Recompute rhs
+        # if getattr(self, '_rhsDict', None) is None:
+        #     self._rhsDict = {}
+        # if mesh not in self._rhsDict:
+        pts = [self.loc[0], self.loc[1]]
+        inds = Utils.closestPoints(prob.mesh, pts)
+        q = np.zeros(prob.mesh.nC)
+        q[inds] = - self.current * ( np.r_[1., -1.] / prob.mesh.vol[inds] )
+        # self._rhsDict[mesh] = q
+        # return self._rhsDict[mesh]
+        return q
+
+
+class RxDipole(Survey.BaseRx):
+    """A dipole source, locA and locB are moved to the closest cell-centers"""
+    def __init__(self, locsM, locsN, **kwargs):
+        locs = (locsM, locsN)
+        assert locsM.shape == locsN.shape, 'locs must be the same shape.'
+        super(RxDipole, self).__init__(locs, 'dipole', storeProjections=False, **kwargs)
+
+    @property
+    def nD(self):
+        """Number of data in the receiver."""
+        return self.locs[0].shape[0]
+
+    def getP(self, mesh):
+        P0 = mesh.getInterpolationMat(self.locs[0], self.projGLoc)
+        P1 = mesh.getInterpolationMat(self.locs[1], self.projGLoc)
+        return P0 - P1
+
+
+class SurveyDC(Survey.BaseSurvey):
+    """
+        **SurveyDC**
+
+        Geophysical DC resistivity data.
+
+    """
+    uncert = None
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        Survey.BaseSurvey.__init__(self, **kwargs)
+        # self._rhsDict = {}
+        self._Ps = {}
+
+    def eval(self, u):
+        """
+            Predicted data.
+
+            .. math::
+                d_\\text{pred} = Pu(m)
+        """
+        P = self.getP(self.prob.mesh)
+        return P*mkvc(u[self.srcList, 'phi_sol'])
+
+    def getP(self, mesh):
+        if mesh in self._Ps:
+            return self._Ps[mesh]
+
+        P_src = [sp.vstack([rx.getP(mesh) for rx in src.rxList]) for src in self.srcList]
+
+        self._Ps[mesh] = sp.block_diag(P_src)
+        return self._Ps[mesh]
+
+
+class ProblemDC_CC(Problem.BaseProblem):
+    """
+        **ProblemDC**
+
+        Geophysical DC resistivity problem.
+
+    """
+
+    surveyPair = SurveyDC
+    Solver     = Solver
+    fieldsPair = FieldsDC_CC
+    Ainv = None
+
+    def __init__(self, mesh, **kwargs):
+        Problem.BaseProblem.__init__(self, mesh)
+        self.mesh.setCellGradBC('neumann')
+        Utils.setKwargs(self, **kwargs)
+
+
+    deleteTheseOnModelUpdate = ['_A', '_Msig', '_dMdsig']
+
+    @property
+    def Msig(self):
+        if getattr(self, '_Msig', None) is None:
+            sigma = self.curModel.transform
+            Av = self.mesh.aveF2CC
+            self._Msig = Utils.sdiag(1/(self.mesh.dim * Av.T * (1/sigma)))
+        return self._Msig
+
+    @property
+    def dMdsig(self):
+        if getattr(self, '_dMdsig', None) is None:
+            sigma = self.curModel.transform
+            Av = self.mesh.aveF2CC
+            dMdprop = self.mesh.dim * Utils.sdiag(self.Msig.diagonal()**2) * Av.T * Utils.sdiag(1./sigma**2)
+            self._dMdsig = lambda Gu: Utils.sdiag(Gu) * dMdprop
+        return self._dMdsig
+
+    @property
+    def A(self):
+        """
+            Makes the matrix A(m) for the DC resistivity problem.
+
+            :param numpy.array m: model
+            :rtype: scipy.csc_matrix
+            :return: A(m)
+
+            .. math::
+                c(m,u) = A(m)u - q = G\\text{sdiag}(M(mT(m)))Du - q = 0
+
+            Where M() is the mass matrix and mT is the model transform.
+        """
+        if getattr(self, '_A', None) is None:
+            D = self.mesh.faceDiv
+            G = self.mesh.cellGrad
+            self._A = D*self.Msig*G
+            # Remove the null space from the matrix.
+            self._A[0,0] /= self.mesh.vol[0]
+            self._A = self._A.tocsc()
+        return self._A
+
+    def getRHS(self):
+        # if self.mesh not in self._rhsDict:
+        RHS = np.array([src.eval(self) for src in self.survey.srcList]).T
+        # self._rhsDict[mesh] = RHS
+        # return self._rhsDict[mesh]
+        return RHS
+
+    def fields(self, m):
+
+        F = self.fieldsPair(self.mesh, self.survey)
+        self.curModel = m
+        A    = self.A
+        self.Ainv = self.Solver(A, **self.solverOpts)
+        RHS    = self.getRHS()
+        Phi  = self.Ainv * RHS
+        Srcs = self.survey.srcList
+        F[Srcs, 'phi_sol'] = Phi
+
+        return F
+
+    def Jvec(self, m, v, f=None):
+        """
+            :param numpy.array m: model
+            :param numpy.array v: vector to multiply
+            :param Fields f: fields
+            :rtype: numpy.array
+            :return: Jv
+
+            .. math::
+                c(m,u) = A(m)u - q = G\\text{sdiag}(M(mT(m)))Du - q = 0
+
+                \\nabla_u (A(m)u - q) = A(m)
+
+                \\nabla_m (A(m)u - q) = G\\text{sdiag}(Du)\\nabla_m(M(mT(m)))
+
+            Where M() is the mass matrix and mT is the model transform.
+
+            .. math::
+                J = - P \left( \\nabla_u c(m, u) \\right)^{-1} \\nabla_m c(m, u)
+
+                J(v) = - P ( A(m)^{-1} ( G\\text{sdiag}(Du)\\nabla_m(M(mT(m))) v ) )
+        """
+        # Set current model; clear dependent property $\mathbf{A(m)}$
+        self.curModel = m
+        sigma = self.curModel.transform # $\sigma = \mathcal{M}(\m)$
+        if f is None:
+            # Run forward simulation if $u$ not provided
+            f = self.fields(self.curModel)
+        u = f[self.survey.srcList, 'phi_sol']
+
+        D = self.mesh.faceDiv
+        G = self.mesh.cellGrad
+        # Derivative of model transform, $\deriv{\sigma}{\m}$
+        dsigdm_x_v = self.curModel.transformDeriv * v
+
+        # Take derivative of $C(m,u)$ w.r.t. $m$
+        dCdm_x_v = np.empty_like(u)
+        # loop over fields for each source
+        for i in range(self.survey.nSrc):
+            # Derivative of inner product, $\left(\mathbf{M}_{1/\sigma}^f\right)^{-1}$
+            dAdsig         = D * self.dMdsig( G * u[:,i] )
+            dCdm_x_v[:, i] = dAdsig *  dsigdm_x_v
+
+        # Take derivative of $C(m,u)$ w.r.t. $u$
+        dA_du = self.A
+        # Solve for $\deriv{u}{m}$
+        # dCdu_inv = self.Solver(dCdu, **self.solverOpts)
+        if self.Ainv is None:
+            self.Ainv = self.Solver(dA_du, **self.solverOpts)
+
+        P     = self.survey.getP(self.mesh)
+        Jv    = - P * mkvc( self.Ainv * dCdm_x_v )
+        return Jv
+
+    def Jtvec(self, m, v, f=None):
+
+        self.curModel = m
+        sigma = self.curModel.transform # $\sigma = \mathcal{M}(\m)$
+        if f is None:
+            # Run forward simulation if $f$ not provided
+            f = self.fields(self.curModel)
+        u = f[self.survey.srcList, 'phi_sol']
+
+        shp = u.shape
+        P = self.survey.getP(self.mesh)
+        PT_x_v = (P.T*v).reshape(shp, order='F')
+
+        D = self.mesh.faceDiv
+        G = self.mesh.cellGrad
+        dA_du = self.A
+        mT_dm = self.mapping.deriv(m)
+
+        # We probably always need this due to the linesearch .. (?)
+        self.Ainv = self.Solver(dA_du.T, **self.solverOpts)
+        # if self.Ainv is None:
+        #     self.Ainv = self.Solver(dCdu, **self.solverOpts)
+
+        w = self.Ainv * PT_x_v
+
+        Jtv = 0
+        for i, ui in enumerate(u.T):  # loop over each column
+            Jtv += self.dMdsig( G * ui ).T * ( D.T * w[:,i] )
+
+        Jtv = - mT_dm.T * ( Jtv )
+        return Jtv
+
+
+
+
+

SimPEG/DCIP/BaseIP.py

@@ -0,0 +1,182 @@
+from SimPEG import *
+from BaseDC import SurveyDC, FieldsDC_CC
+
+class SurveyIP(SurveyDC):
+    """
+        **SurveyDC**
+
+        Geophysical DC resistivity data.
+
+    """
+
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        Survey.BaseSurvey.__init__(self, **kwargs)
+        self._Ps = {}
+
+    def dpred(self, m, f=None):
+        """
+            Predicted data.
+
+            .. math::
+                d_\\text{pred} = Pf(m)
+        """
+
+        return self.prob.forward(m)
+
+
+class ProblemIP(Problem.BaseProblem):
+    """
+        **ProblemIP**
+
+        Geophysical IP resistivity problem.
+
+    """
+
+    surveyPair = SurveyDC
+    Solver     = Solver
+    sigma = None
+    Ainv = None
+    u = None
+
+    def __init__(self, mesh, **kwargs):
+        Problem.BaseProblem.__init__(self, mesh)
+        self.mesh.setCellGradBC('neumann')
+        Utils.setKwargs(self, **kwargs)
+
+    # deleteTheseOnModelUpdate = ['_A', '_Msig', '_dMdsig']
+
+    @property
+    def Msig(self):
+        if getattr(self, '_Msig', None) is None:
+            # sigma = self.curModel.transform
+            sigma = self.sigma
+            Av = self.mesh.aveF2CC
+            self._Msig = Utils.sdiag(1/(self.mesh.dim * Av.T * (1/sigma)))
+        return self._Msig
+
+    @property
+    def dMdsig(self):
+        if getattr(self, '_dMdsig', None) is None:
+            # sigma = self.curModel.transform
+            sigma = self.sigma
+            Av = self.mesh.aveF2CC
+            dMdprop = self.mesh.dim * Utils.sdiag(self.Msig.diagonal()**2) * Av.T * Utils.sdiag(1./sigma**2)
+            self._dMdsig = lambda Gu: Utils.sdiag(Gu) * dMdprop
+        return self._dMdsig
+
+    @property
+    def A(self):
+        """
+            Makes the matrix A(m) for the DC resistivity problem.
+
+            :param numpy.array m: model
+            :rtype: scipy.csc_matrix
+            :return: A(m)
+
+            .. math::
+                c(m,u) = A(m)u - q = G\\text{sdiag}(M(mT(m)))Du - q = 0
+
+            Where M() is the mass matrix and mT is the model transform.
+        """
+        if getattr(self, '_A', None) is None:
+            D = self.mesh.faceDiv
+            G = self.mesh.cellGrad
+            self._A = D*self.Msig*G
+            # Remove the null space from the matrix.
+            self._A[-1,-1] /= self.mesh.vol[-1]
+            self._A = self._A.tocsc()
+        return self._A
+
+    def getRHS(self):
+        # if self.mesh not in self._rhsDict:
+        RHS = np.array([src.eval(self) for src in self.survey.srcList]).T
+        # self._rhsDict[mesh] = RHS
+        # return self._rhsDict[mesh]
+        return RHS
+
+    def fields(self, m):
+        if self.u is None:
+	        A    = self.A
+	        if self.Ainv == None:
+	        	self.Ainv = self.Solver(A, **self.solverOpts)
+	        Q    = self.getRHS()
+	        self.u  = self.Ainv * Q
+        return self.u
+
+    def forward(self, m, u=None):
+        # Set current model; clear dependent property $\mathbf{A(m)}$
+        self.curModel = m
+        # sigma = self.curModel.transform # $\sigma = \mathcal{M}(\m)$
+        sigma = self.sigma
+        if self.u is None:
+            # Run forward simulation if $u$ not provided
+            u = self.fields(sigma)
+
+        shp = (self.mesh.nC, self.survey.nSrc)
+        u = self.u.reshape(shp, order='F')
+
+        D = self.mesh.faceDiv
+        G = self.mesh.cellGrad
+        # Derivative of model transform, $\deriv{\sigma}{\m}$
+        # dsigdm_x_v = self.curModel.transformDeriv * v
+
+        dsigdm_x_v = Utils.sdiag(sigma) * self.curModel.transformDeriv *  m
+
+        # Take derivative of $C(m,u)$ w.r.t. $m$
+        dCdm_x_v = np.empty_like(u)
+        # loop over fields for each source
+        for i in range(self.survey.nSrc):
+            # Derivative of inner product, $\left(\mathbf{M}_{1/\sigma}^f\right)^{-1}$
+            dAdsig         = D * self.dMdsig( G * u[:,i] )
+            dCdm_x_v[:, i] = dAdsig *  dsigdm_x_v
+
+        # Take derivative of $C(m,u)$ w.r.t. $u$
+
+        if self.Ainv == None:
+        	self.Ainv = self.Solver(A, **self.solverOpts)
+
+        # dCdu = self.A
+        # Solve for $\deriv{u}{m}$
+        # dCdu_inv = self.Solver(dCdu, **self.solverOpts)
+        P        = self.survey.getP(self.mesh)
+        J_x_v    = - P * mkvc( self.Ainv * dCdm_x_v )
+        return -J_x_v
+
+    def Jvec(self, m, v, f=None):
+        return self.forward(v)
+
+    def Jtvec(self, m, v, f=None):
+
+        self.curModel = m
+        # sigma = self.curModel.transform # $\sigma = \mathcal{M}(\m)$
+        sigma = self.sigma
+        if self.u is None:
+            u = self.fields(sigma)
+        else:
+        	u = self.u
+        shp = (self.mesh.nC, self.survey.nSrc)
+        u = u.reshape(shp, order='F')
+        P = self.survey.getP(self.mesh)
+        PT_x_v = (P.T*v).reshape(shp, order='F')
+
+        D = self.mesh.faceDiv
+        G = self.mesh.cellGrad
+        A = self.A
+        mT_dm = Utils.sdiag(sigma)*self.mapping.deriv(m)
+        # mT_dm = self.mapping.deriv(m)
+
+        # dCdu = A.T
+        # Ainv = self.Solver(dCdu, **self.solverOpts)
+        # if self.Ainv == None:
+    	self.Ainv = self.Solver(A.T, **self.solverOpts)
+
+        w = self.Ainv * PT_x_v
+
+        Jtv = 0
+        for i, ui in enumerate(u.T):  # loop over each column
+            Jtv += self.dMdsig( G * ui ).T * ( D.T * w[:,i] )
+
+        Jtv = - mT_dm.T * ( Jtv )
+        return -Jtv
+

SimPEG/DCIP/Utils.py

@@ -0,0 +1,38 @@
+import numpy as np
+
+def WennerSrcList(nElecs, aSpacing, in2D=False, plotIt=False):
+
+    import SimPEG.DCIP as DC
+
+    elocs = np.arange(0,aSpacing*nElecs,aSpacing)
+    elocs -= (nElecs*aSpacing - aSpacing)/2
+    space = 1
+    WENNER = np.zeros((0,),dtype=int)
+    for ii in range(nElecs):
+        for jj in range(nElecs):
+            test = np.r_[jj,jj+space,jj+space*2,jj+space*3]
+            if np.any(test >= nElecs):
+                break
+            WENNER = np.r_[WENNER, test]
+        space += 1
+    WENNER = WENNER.reshape((-1,4))
+
+
+    if plotIt:
+        for i, s in enumerate('rbkg'):
+            plt.plot(elocs[WENNER[:,i]],s+'.')
+        plt.show()
+
+    # Create sources and receivers
+    i = 0
+    if in2D:
+        getLoc = lambda ii, abmn: np.r_[elocs[WENNER[ii,abmn]],0]
+    else:
+        getLoc = lambda ii, abmn: np.r_[elocs[WENNER[ii,abmn]],0, 0]
+    srcList = []
+    for i in range(WENNER.shape[0]):
+        rx = DC.RxDipole(getLoc(i,1),getLoc(i,2))
+        src = DC.SrcDipole([rx], getLoc(i,0),getLoc(i,3))
+        srcList += [src]
+
+    return srcList

SimPEG/DCIP/__init__.py

@@ -0,0 +1,4 @@
+from BaseDC import *
+from BaseIP import *
+from DCIPUtils import *
+import Utils

SimPEG/DataMisfit.py

@@ -22,11 +22,11 @@ class BaseDataMisfit(object):
         Utils.setKwargs(self,**kwargs)
 
     @Utils.timeIt
-    def eval(self, m, u=None):
-        """eval(m, u=None)
+    def eval(self, m, f=None):
+        """eval(m, f=None)
 
             :param numpy.array m: geophysical model
-            :param numpy.array u: fields
+            :param Fields f: fields
             :rtype: float
             :return: data misfit
 
@@ -34,11 +34,11 @@ class BaseDataMisfit(object):
         raise NotImplementedError('This method should be overwritten.')
 
     @Utils.timeIt
-    def evalDeriv(self, m, u=None):
-        """evalDeriv(m, u=None)
+    def evalDeriv(self, m, f=None):
+        """evalDeriv(m, f=None)
 
             :param numpy.array m: geophysical model
-            :param numpy.array u: fields
+            :param Fields f: fields
             :rtype: numpy.array
             :return: data misfit derivative
 
@@ -47,32 +47,18 @@ class BaseDataMisfit(object):
 
 
     @Utils.timeIt
-    def eval2Deriv(self, m, v, u=None):
-        """eval2Deriv(m, v, u=None)
+    def eval2Deriv(self, m, v, f=None):
+        """eval2Deriv(m, v, f=None)
 
             :param numpy.array m: geophysical model
             :param numpy.array v: vector to multiply
-            :param numpy.array u: fields
+            :param Fields f: fields
             :rtype: numpy.array
             :return: data misfit derivative
 
         """
         raise NotImplementedError('This method should be overwritten.')
 
-    # TODO: implement target misfit as a property, or possibly as an inversion directive.
-
-    # def target(self, forward):
-    #     """target(forward)
-
-    #         Target for data misfit. By default this is the number of data,
-    #         which satisfies the Discrepancy Principle.
-
-    #         :rtype: float
-    #         :return: data misfit target
-
-    #     """
-    #     prob, survey = self.splitForward(forward)
-    #     return survey.nD
 
 
 class l2_DataMisfit(BaseDataMisfit):
@@ -103,10 +89,18 @@ class l2_DataMisfit(BaseDataMisfit):
         """
 
         if getattr(self, '_Wd', None) is None:
-            print 'SimPEG.l2_DataMisfit is creating default weightings for Wd.'
+
             survey = self.survey
-            eps = np.linalg.norm(Utils.mkvc(survey.dobs),2)*1e-5
-            self._Wd = Utils.sdiag(1/(abs(survey.dobs)*survey.std+eps))
+
+            if getattr(survey,'std', None) is None:
+                print 'SimPEG.DataMisfit.l2_DataMisfit assigning default std of 5%'
+                survey.std = 0.05
+
+            if getattr(survey, 'eps', None) is None:
+                print 'SimPEG.DataMisfit.l2_DataMisfit assigning default eps of 1e-5 * ||dobs||'
+                survey.eps = np.linalg.norm(Utils.mkvc(survey.dobs),2)*1e-5
+
+            self._Wd = Utils.sdiag(1/(abs(survey.dobs)*survey.std+survey.eps))
         return self._Wd
 
     @Wd.setter
@@ -114,24 +108,20 @@ class l2_DataMisfit(BaseDataMisfit):
         self._Wd = value
 
     @Utils.timeIt
-    def eval(self, m, u=None):
-        "eval(m, u=None)"
-        prob   = self.prob
-        survey = self.survey
-        R = self.Wd * survey.residual(m, u=u)
+    def eval(self, m, f=None):
+        "eval(m, f=None)"
+        if f is None: f = self.prob.fields(m)
+        R = self.Wd * self.survey.residual(m, f)
         return 0.5*np.vdot(R, R)
 
     @Utils.timeIt
-    def evalDeriv(self, m, u=None):
-        "evalDeriv(m, u=None)"
-        prob   = self.prob
-        survey = self.survey
-        if u is None: u = prob.fields(m)
-        return prob.Jtvec(m, self.Wd * (self.Wd * survey.residual(m, u=u)), u=u)
+    def evalDeriv(self, m, f=None):
+        "evalDeriv(m, f=None)"
+        if f is None: f = self.prob.fields(m)
+        return self.prob.Jtvec(m, self.Wd * (self.Wd * self.survey.residual(m, f=f)), f=f)
 
     @Utils.timeIt
-    def eval2Deriv(self, m, v, u=None):
-        "eval2Deriv(m, v, u=None)"
-        prob   = self.prob
-        if u is None: u = prob.fields(m)
-        return prob.Jtvec_approx(m, self.Wd * (self.Wd * prob.Jvec_approx(m, v, u=u)), u=u)
+    def eval2Deriv(self, m, v, f=None):
+        "eval2Deriv(m, v, f=None)"
+        if f is None: f = self.prob.fields(m)
+        return self.prob.Jtvec_approx(m, self.Wd * (self.Wd * self.prob.Jvec_approx(m, v, f=f)), f=f)

SimPEG/Directives.py

@@ -123,10 +123,10 @@ class BetaEstimate_ByEig(InversionDirective):
         if self.debug: print 'Calculating the beta0 parameter.'
 
         m = self.invProb.curModel
-        u = self.invProb.getFields(m, store=True, deleteWarmstart=False)
+        f = self.invProb.getFields(m, store=True, deleteWarmstart=False)
 
         x0 = np.random.rand(*m.shape)
-        t = x0.dot(self.dmisfit.eval2Deriv(m,x0,u=u))
+        t = x0.dot(self.dmisfit.eval2Deriv(m,x0,f=f))
         b = x0.dot(self.reg.eval2Deriv(m, v=x0))
         self.beta0 = self.beta0_ratio*(t/b)
 
@@ -146,10 +146,15 @@ class BetaSchedule(InversionDirective):
 
 class TargetMisfit(InversionDirective):
 
+    chifact = 1.
+    phi_d_star = None
+
     @property
     def target(self):
         if getattr(self, '_target', None) is None:
-            self._target = self.survey.nD*0.5
+            if self.phi_d_star is None:
+                self.phi_d_star = 0.5 * self.survey.nD
+            self._target = self.chifact * self.phi_d_star # the factor of 0.5 is because we do phid = 0.5*|| dpred - dobs||^2
         return self._target
     @target.setter
     def target(self, val):
@@ -206,7 +211,36 @@ class SaveOutputEveryIteration(_SaveEveryIteration):
         f.write(' %3d %1.4e %1.4e %1.4e %1.4e\n'%(self.opt.iter, self.invProb.beta, self.invProb.phi_d, self.invProb.phi_m, self.opt.f))
         f.close()
 
+class SaveOutputDictEveryIteration(_SaveEveryIteration):
+    """SaveOutputDictEveryIteration"""
 
+    def initialize(self):
+        print "SimPEG.SaveOutputDictEveryIteration will save your inversion progress as dictionary: '###-%s.npz'"%self.fileName
+
+    def endIter(self):
+        # Save the data.
+        ms = self.reg.Ws * ( self.reg.mapping * (self.invProb.curModel - self.reg.mref) )
+        phi_ms = 0.5*ms.dot(ms)
+        if self.reg.mrefInSmooth == True:
+            mref = self.reg.mref
+        else:
+            mref = 0
+        mx = self.reg.Wx * ( self.reg.mapping * (self.invProb.curModel - mref) )
+        phi_mx = 0.5 * mx.dot(mx)
+        if self.prob.mesh.dim >= 2:
+            my = self.reg.Wy * ( self.reg.mapping * (self.invProb.curModel - mref) )
+            phi_my = 0.5 * my.dot(my)
+        else:
+            phi_my = 'NaN'
+        if self.prob.mesh.dim==3:
+            mz = self.reg.Wz * ( self.reg.mapping * (self.invProb.curModel - mref) )
+            phi_mz = 0.5 * mz.dot(mz)
+        else:
+            phi_mz = 'NaN'
+
+
+        # Save the file as a npz
+        np.savez('{:03d}-{:s}'.format(self.opt.iter,self.fileName), iter=self.opt.iter, beta=self.invProb.beta, phi_d=self.invProb.phi_d, phi_m=self.invProb.phi_m, phi_ms=phi_ms, phi_mx=phi_mx, phi_my=phi_my, phi_mz=phi_mz,f=self.opt.f, m=self.invProb.curModel,dpred=self.invProb.dpred)
 
 
 # class UpdateReferenceModel(Parameter):
@@ -220,3 +254,125 @@ class SaveOutputEveryIteration(_SaveEveryIteration):
 #             mref = self.mref0
 #         self.m_prev = self.invProb.m_current
 #         return mref
+
+class Update_IRLS(InversionDirective):
+
+    eps_min = None
+    factor = None
+    gamma = None
+    phi_m_last = None
+    phi_d_last = None
+
+
+    def initialize(self):
+
+        # Scale the regularization for changes in norm
+        if getattr(self, 'phi_m_last', None) is not None:
+
+            self.reg.curModel = self.invProb.curModel
+            self.reg.gamma = 1.
+            phim_new = self.reg.eval(self.invProb.curModel)
+            self.gamma = self.phi_m_last / phim_new
+
+        self.reg.curModel = self.invProb.curModel
+        self.reg.gamma = self.gamma
+
+        if getattr(self, 'phi_d_last', None) is None:
+            self.phi_d_last = self.invProb.phi_d
+
+    def endIter(self):
+        # Cool the threshold parameter if required
+        if getattr(self, 'factor', None) is not None:
+            eps = self.reg.eps / self.factor
+
+            if getattr(self, 'eps_min', None) is not None:
+                self.reg.eps = np.max([self.eps_min,eps])
+            else:
+                self.reg.eps = eps
+
+        # Get phi_m at the end of current iteration
+        self.phi_m_last = self.invProb.phi_m_last
+
+         # Update the model used for the IRLS weights
+        self.reg.curModel = self.invProb.curModel
+
+        # Temporarely set gamma to 1. to get raw phi_m
+        self.reg.gamma = 1.
+
+        # Compute new model objective function value
+        phim_new = self.reg.eval(self.invProb.curModel)
+
+        # Update gamma to scale the regularization between IRLS iterations
+        self.reg.gamma = self.phi_m_last / phim_new
+
+        # Set the weighting matrix to None so that it is recomputed next time
+        # it is called in the inversion
+        self.reg._W = None
+
+class Update_lin_PreCond(InversionDirective):
+    """
+    Create a Jacobi preconditioner for the linear problem
+    """
+    onlyOnStart=False
+
+    def initialize(self):
+
+        if getattr(self.opt, 'approxHinv', None) is None:
+            # Update the pre-conditioner
+            diagA = np.sum(self.prob.G**2.,axis=0) + self.invProb.beta*(self.reg.W.T*self.reg.W).diagonal() #* (self.reg.mapping * np.ones(self.reg.curModel.size))**2.
+            PC     = Utils.sdiag((self.prob.mapping.deriv(None).T *diagA)**-1.)
+            self.opt.approxHinv = PC
+
+    def endIter(self):
+        # Cool the threshold parameter
+        if self.onlyOnStart==True:
+            return
+
+        if getattr(self.opt, 'approxHinv', None) is not None:
+            # Update the pre-conditioner
+            diagA = np.sum(self.prob.G**2.,axis=0) + self.invProb.beta*(self.reg.W.T*self.reg.W).diagonal() #* (self.reg.mapping * np.ones(self.reg.curModel.size))**2.
+            PC     = Utils.sdiag((self.prob.mapping.deriv(None).T *diagA)**-1.)
+            self.opt.approxHinv = PC
+
+
+class Update_Wj(InversionDirective):
+    """
+        Create approx-sensitivity base weighting using the probing method
+    """
+    k = None # Number of probing cycles
+    itr = None # Iteration number to update Wj, or always update if None
+
+    def endIter(self):
+
+        if self.itr is None or self.itr == self.opt.iter:
+
+            m = self.invProb.curModel
+            if self.k is None:
+                self.k = int(self.survey.nD/10)
+
+            def JtJv(v):
+
+                Jv = self.prob.Jvec(m, v)
+
+                return self.prob.Jtvec(m,Jv)
+
+            JtJdiag = Utils.diagEst(JtJv,len(m),k=self.k)
+            JtJdiag = JtJdiag / max(JtJdiag)
+
+            self.reg.wght = JtJdiag
+
+class Scale_Beta(InversionDirective):
+    """
+        Instead of a linear cooling schedule, beta is allowed to change based
+        on the ratio between the target misfit and the current data misfit. The
+        update is done only if the misfit is outside some threshold bounds.
+    """
+    tol = 0.05
+
+    def endIter(self):
+
+        # Check if misfit is within the tolerance, otherwise adjust beta
+        val = self.invProb.phi_d / (self.survey.nD*0.5)
+
+        if np.abs(1.-val) > self.tol:
+            self.invProb.beta = self.invProb.beta * self.survey.nD*0.5 / self.invProb.phi_d

SimPEG/EM/Analytics/DC.py

@@ -0,0 +1,118 @@
+import numpy as np
+from scipy.constants import mu_0, pi
+from scipy import special
+
+def DCAnalyticHalf(txloc, rxlocs, sigma, earth_type="wholespace"):
+    """
+        Analytic solution for electric potential from a postive pole
+
+        :param array txloc: a xyz location of A (+) electrode (np.r_[xa, ya, za])
+        :param list rxlocs: xyz locations of M (+) and N (-) electrodes [M, N]
+
+            e.g.
+            rxlocs = [M, N]
+            M: xyz locations of M (+) electrode (np.c_[xmlocs, ymlocs, zmlocs])
+            N: xyz locations of N (-) electrode (np.c_[xnlocs, ynlocs, znlocs])
+
+        :param float or complex sigma: values of conductivity
+        :param string earth_type: values of conductivity ("wholsespace" or "halfspace")
+
+    """
+    M = rxlocs[0]
+    N = rxlocs[1]
+
+    rM = np.sqrt( (M[:,0]-txloc[0])**2 + (M[:,1]-txloc[1])**2 + (M[:,2]-txloc[1])**2 )
+    rN = np.sqrt( (N[:,0]-txloc[0])**2 + (N[:,1]-txloc[1])**2 + (N[:,2]-txloc[1])**2 )
+
+    phiM = 1./(4*np.pi*rM*sigma)
+    phiN = 1./(4*np.pi*rN*sigma)
+    phi = phiM - phiN
+
+    if earth_type == "halfspace":
+        phi *= 2
+
+    return phi
+
+deg2rad  = lambda deg: deg/180.*np.pi
+rad2deg  = lambda rad: rad*180./np.pi
+
+def DCAnalyticSphere(txloc, rxloc, xc, radius, sigma, sigma1, \
+                 field_type = "secondary", order=12, halfspace=False):
+# def DCSpherePointCurrent(txloc, rxloc, xc, radius, rho, rho1, \
+#                  field_type = "secondary", order=12):
+    """
+
+        Parameters:
+
+            :param array txloc: A (+) current electrode location (x,y,z)
+            :param array xc: x center of depressed sphere
+            :param array rxloc: M(+) electrode locations / (Nx3 array, # of electrodes)
+
+            :param float radius: radius (float): radius of the sphere (m)
+            :param float rho: resistivity of the background (ohm-m)
+            :param float rho1: resistivity of the sphere
+            :param string field_type: : "secondary", "total", "primary"
+                  (default="secondary")
+                  "secondary": secondary potential only due to sphere
+                  "primary": primary potential from the point source
+                  "total": "secondary"+"primary"
+            :param float order: maximum order of Legendre polynomial (default=12)
+
+        Written by Seogi Kang (skang@eos.ubc.ca)
+        Ph.D. Candidate of University of British Columbia, Canada
+
+    """
+
+    Pleg = []
+    # Compute Legendre Polynomial
+    for i in range(order):
+        Pleg.append(special.legendre(i, monic=0))
+
+
+    rho = 1./sigma
+    rho1 = 1./sigma1
+
+    # Center of the sphere should be aligned in txloc in y-direction
+    yc = txloc[1]
+    xyz = np.c_[rxloc[:,0]-xc, rxloc[:,1]-yc, rxloc[:,2]]
+    r = np.sqrt( (xyz**2).sum(axis=1) )
+
+    x0 = abs(txloc[0]-xc)
+
+    costheta = xyz[:,0]/r * (txloc[0]-xc)/x0
+    phi = np.zeros_like(r)
+    R = (r**2+x0**2.-2.*r*x0*costheta)**0.5
+    # primary potential in a whole space
+    prim = rho*1./(4*np.pi*R)
+
+    if field_type =="primary":
+        return prim
+
+    sphind = r < radius
+    out = np.zeros_like(r)
+    for n in range(order):
+        An, Bn = AnBnfun(n, radius, x0, rho, rho1)
+        dumout = An*r[~sphind]**(-n-1.)*Pleg[n](costheta[~sphind])
+        out[~sphind] += dumout
+        dumin = Bn*r[sphind]**(n)*Pleg[n](costheta[sphind])
+        out[sphind] += dumin
+
+    out[~sphind] += prim[~sphind]
+
+    if halfspace:
+        scale = 2
+    else:
+        scale = 1
+
+    if field_type == "secondary":
+        return scale*(out-prim)
+    elif field_type == "total":
+        return scale*out
+
+def AnBnfun(n, radius, x0, rho, rho1, I=1.):
+    const = I*rho/(4*np.pi)
+    bunmo = n*rho + (n+1)*rho1
+    An = const * radius**(2*n+1) / x0 ** (n+1.) * n * \
+        (rho1-rho) / bunmo
+    Bn = const * 1. / x0 ** (n+1.) * (2*n+1) * (rho1) / bunmo
+    return An, Bn

SimPEG/EM/Analytics/FDEM.py

@@ -2,7 +2,6 @@ from __future__ import division
 import numpy as np
 from scipy.constants import mu_0, pi
 from scipy.special import erf
-import matplotlib.pyplot as plt
 from SimPEG import Utils
 
 
@@ -59,8 +58,9 @@ def MagneticDipoleWholeSpace(XYZ, srcLoc, sig, f, moment=1., orientation='X', mu
 
         from SimPEG import EM
         import matplotlib.pyplot as plt
+        from scipy.constants import mu_0
         freqs = np.logspace(-2,5,100)
-        Bx, By, Bz = EM.Analytics.FDEM.AnalyticMagDipoleWholeSpace([0,100,0], [0,0,0], 1e-2, freqs, m=1, orientation='Z')
+        Bx, By, Bz = EM.Analytics.FDEM.MagneticDipoleWholeSpace([0,100,0], [0,0,0], 1e-2, freqs, moment=1, orientation='Z')
         plt.loglog(freqs, np.abs(Bz.real)/mu_0, 'b')
         plt.loglog(freqs, np.abs(Bz.imag)/mu_0, 'r')
         plt.legend(('real','imag'))

SimPEG/EM/Analytics/__init__.py

@@ -1,3 +1,4 @@
 from TDEM import hzAnalyticDipoleT
 from FDEM import hzAnalyticDipoleF
 from FDEMcasing import *
+from DC import DCAnalyticHalf, DCAnalyticSphere

SimPEG/EM/Base.py

@@ -1,15 +1,16 @@
 from SimPEG import Survey, Problem, Utils, Models, Maps, PropMaps, np, sp, Solver as SimpegSolver
 from scipy.constants import mu_0
 
+
 class EMPropMap(Maps.PropMap):
-    """ 
+    """
         Property Map for EM Problems. The electrical conductivity (\\(\\sigma\\)) is the default inversion property, and the default value of the magnetic permeability is that of free space (\\(\\mu = 4\\pi\\times 10^{-7} \\) H/m)
     """
 
     sigma = Maps.Property("Electrical Conductivity", defaultInvProp = True, propertyLink=('rho',Maps.ReciprocalMap))
     mu = Maps.Property("Inverse Magnetic Permeability", defaultVal = mu_0, propertyLink=('mui',Maps.ReciprocalMap))
 
-    rho = Maps.Property("Electrical Resistivity", propertyLink=('sigma', Maps.ReciprocalMap)) 
+    rho = Maps.Property("Electrical Resistivity", propertyLink=('sigma', Maps.ReciprocalMap))
     mui = Maps.Property("Inverse Magnetic Permeability", defaultVal = 1./mu_0, propertyLink=('mu', Maps.ReciprocalMap))
 
 
@@ -21,7 +22,7 @@ class BaseEMProblem(Problem.BaseProblem):
 
     surveyPair = Survey.BaseSurvey
     dataPair = Survey.Data
-    
+
     PropMap = EMPropMap
 
     Solver = SimpegSolver
@@ -51,7 +52,7 @@ class BaseEMProblem(Problem.BaseProblem):
         if self.mapping.muMap is not None or self.mapping.muiMap is not None:
             toDelete += ['_MeMu', '_MeMuI','_MfMui','_MfMuiI']
         return toDelete
-    
+
     @property
     def Me(self):
         """
@@ -61,6 +62,15 @@ class BaseEMProblem(Problem.BaseProblem):
             self._Me = self.mesh.getEdgeInnerProduct()
         return self._Me
 
+    @property
+    def MeI(self):
+        """
+            Edge inner product matrix
+        """
+        if getattr(self, '_MeI', None) is None:
+            self._MeI = self.mesh.getEdgeInnerProduct(invMat=True)
+        return self._MeI
+
     @property
     def Mf(self):
         """
@@ -70,8 +80,22 @@ class BaseEMProblem(Problem.BaseProblem):
             self._Mf = self.mesh.getFaceInnerProduct()
         return self._Mf
 
+    @property
+    def MfI(self):
+        """
+            Face inner product matrix
+        """
+        if getattr(self, '_MfI', None) is None:
+            self._MfI = self.mesh.getFaceInnerProduct(invMat=True)
+        return self._MfI
 
-    # ----- Magnetic Permeability ----- # 
+    @property
+    def Vol(self):
+        if getattr(self, '_Vol', None) is None:
+            self._Vol = Utils.sdiag(self.mesh.vol)
+        return self._Vol
+
+    # ----- Magnetic Permeability ----- #
     @property
     def MfMui(self):
         """
@@ -109,7 +133,7 @@ class BaseEMProblem(Problem.BaseProblem):
         return self._MeMuI
 
 
-    # ----- Electrical Conductivity ----- # 
+    # ----- Electrical Conductivity ----- #
     #TODO: hardcoded to sigma as the model
     @property
     def MeSigma(self):
@@ -120,18 +144,17 @@ class BaseEMProblem(Problem.BaseProblem):
             self._MeSigma = self.mesh.getEdgeInnerProduct(self.curModel.sigma)
         return self._MeSigma
 
-    # TODO: This should take a vector 
+    # TODO: This should take a vector
     def MeSigmaDeriv(self, u):
         """
             Derivative of MeSigma with respect to the model
-        """ 
+        """
         return self.mesh.getEdgeInnerProductDeriv(self.curModel.sigma)(u) * self.curModel.sigmaDeriv
-    
 
     @property
     def MeSigmaI(self):
         """
-            Inverse of the edge inner product matrix for \\(\\sigma\\). 
+            Inverse of the edge inner product matrix for \\(\\sigma\\).
         """
         if getattr(self, '_MeSigmaI', None) is None:
             self._MeSigmaI = self.mesh.getEdgeInnerProduct(self.curModel.sigma, invMat=True)
@@ -140,16 +163,13 @@ class BaseEMProblem(Problem.BaseProblem):
     # TODO: This should take a vector
     def MeSigmaIDeriv(self, u):
         """
-            Derivative of :code:`MeSigma` with respect to the model 
-        """ 
+            Derivative of :code:`MeSigma` with respect to the model
+        """
         # TODO: only works for diagonal tensors. getEdgeInnerProductDeriv, invMat=True should be implemented in SimPEG
 
         dMeSigmaI_dI = -self.MeSigmaI**2
         dMe_dsig = self.mesh.getEdgeInnerProductDeriv(self.curModel.sigma)(u)
-        dsig_dm = self.curModel.sigmaDeriv
-        return dMeSigmaI_dI * ( dMe_dsig * ( dsig_dm))
-        # return self.mesh.getEdgeInnerProductDeriv(self.curModel.sigma, invMat=True)(u)
-
+        return dMeSigmaI_dI * ( dMe_dsig * self.curModel.sigmaDeriv )
 
     @property
     def MfRho(self):
@@ -163,10 +183,9 @@ class BaseEMProblem(Problem.BaseProblem):
     # TODO: This should take a vector
     def MfRhoDeriv(self,u):
         """
-            Derivative of :code:`MfRho` with respect to the model. 
+            Derivative of :code:`MfRho` with respect to the model.
         """
-        return self.mesh.getFaceInnerProductDeriv(self.curModel.rho)(u) * (-Utils.sdiag(self.curModel.rho**2) * self.curModel.sigmaDeriv)
-        # self.curModel.rhoDeriv
+        return self.mesh.getFaceInnerProductDeriv(self.curModel.rho)(u) * self.curModel.rhoDeriv
 
     @property
     def MfRhoI(self):
@@ -181,6 +200,32 @@ class BaseEMProblem(Problem.BaseProblem):
     # TODO: This should take a vector
     def MfRhoIDeriv(self,u):
         """
-            Derivative of :code:`MfRhoI` with respect to the model. 
+            Derivative of :code:`MfRhoI` with respect to the model.
         """
-        return self.mesh.getFaceInnerProductDeriv(self.curModel.rho, invMat=True)(u) * self.curModel.rhoDeriv
+
+        dMfRhoI_dI = -self.MfRhoI**2
+        dMf_drho = self.mesh.getFaceInnerProductDeriv(self.curModel.rho)(u)
+        return dMfRhoI_dI * ( dMf_drho * self.curModel.rhoDeriv )
+
+class BaseEMSurvey(Survey.BaseSurvey):
+
+    def __init__(self, srcList, **kwargs):
+        # Sort these by frequency
+        self.srcList = srcList
+        Survey.BaseSurvey.__init__(self, **kwargs)
+
+    def eval(self, f):
+        """
+        Project fields to receiver locations
+        :param Fields u: fields object
+        :rtype: numpy.ndarray
+        :return: data
+        """
+        data = Survey.Data(self)
+        for src in self.srcList:
+            for rx in src.rxList:
+                data[src, rx] = rx.eval(src, self.mesh, f)
+        return data
+
+    def evalDeriv(self, f):
+        raise Exception('Use Receivers to project fields deriv.')

SimPEG/EM/FDEM/FDEM.py

@@ -1,570 +0,0 @@
-from SimPEG import Problem, Utils, np, sp, Solver as SimpegSolver
-from scipy.constants import mu_0
-from SurveyFDEM import Survey as SurveyFDEM
-from FieldsFDEM import Fields, Fields_e, Fields_b, Fields_h, Fields_j
-from SimPEG.EM.Base import BaseEMProblem
-from SimPEG.EM.Utils import omega
-
-
-class BaseFDEMProblem(BaseEMProblem):
-    """
-        We start by looking at Maxwell's equations in the electric
-        field \\\(\\\mathbf{e}\\\) and the magnetic flux
-        density \\\(\\\mathbf{b}\\\)
-
-        .. math ::
-
-            \mathbf{C} \mathbf{e} + i \omega \mathbf{b} = \mathbf{s_m} \\\\
-            {\mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{b} - \mathbf{M_{\sigma}^e} \mathbf{e} = \mathbf{M^e} \mathbf{s_e}}
-
-        if using the E-B formulation (:code:`Problem_e`
-        or :code:`Problem_b`) or the magnetic field
-        \\\(\\\mathbf{h}\\\) and current density \\\(\\\mathbf{j}\\\)
-
-        .. math ::
-
-            \mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{j} + i \omega \mathbf{M_{\mu}^e} \mathbf{h} = \mathbf{M^e} \mathbf{s_m} \\\\
-            \mathbf{C} \mathbf{h} - \mathbf{j} = \mathbf{s_e}
-
-        if using the H-J formulation (:code:`Problem_j` or :code:`Problem_h`).
-
-        The problem performs the elimination so that we are solving the system for \\\(\\\mathbf{e},\\\mathbf{b},\\\mathbf{j} \\\) or \\\(\\\mathbf{h}\\\)
-    """
-
-    surveyPair = SurveyFDEM
-    fieldsPair = Fields
-
-    def fields(self, m=None):
-        """
-            Solve the forward problem for the fields.
-        """
-
-        self.curModel = m
-        F = self.fieldsPair(self.mesh, self.survey)
-
-        for freq in self.survey.freqs:
-            A = self.getA(freq)
-            rhs = self.getRHS(freq)
-            Ainv = self.Solver(A, **self.solverOpts)
-            sol = Ainv * rhs
-            Srcs = self.survey.getSrcByFreq(freq)
-            ftype = self._fieldType + 'Solution'
-            F[Srcs, ftype] = sol
-
-        return F
-
-    def Jvec(self, m, v, f=None):
-        """
-            Sensitivity times a vector
-        """
-
-        if f is None:
-           f = self.fields(m)
-
-        self.curModel = m
-
-        Jv = self.dataPair(self.survey)
-
-        for freq in self.survey.freqs:
-            A = self.getA(freq) #
-            Ainv = self.Solver(A, **self.solverOpts)
-
-            for src in self.survey.getSrcByFreq(freq):
-                ftype = self._fieldType + 'Solution'
-                u_src = f[src, ftype]
-                dA_dm = self.getADeriv_m(freq, u_src, v)
-                dRHS_dm = self.getRHSDeriv_m(freq, src, v) 
-                du_dm = Ainv * ( - dA_dm + dRHS_dm )
-                
-                for rx in src.rxList:
-                    df_duFun = getattr(f, '_%sDeriv_u'%rx.projField, None)
-                    df_dudu_dm = df_duFun(src, du_dm, adjoint=False)
-
-                    df_dmFun = getattr(f, '_%sDeriv_m'%rx.projField, None)
-                    df_dm = df_dmFun(src, v, adjoint=False)
-
-                    Df_Dm = np.array(df_dudu_dm + df_dm,dtype=complex)
-
-                    P = lambda v: rx.projectFieldsDeriv(src, self.mesh, f, v) # wrt u, also have wrt m
-
-                    Jv[src, rx] = P(Df_Dm)
-
-        return Utils.mkvc(Jv)
-
-    def Jtvec(self, m, v, f=None):
-        """
-            Sensitivity transpose times a vector
-        """
-
-        if f is None:
-            f = self.fields(m)
-
-        self.curModel = m
-
-        # Ensure v is a data object.
-        if not isinstance(v, self.dataPair):
-            v = self.dataPair(self.survey, v)
-
-        Jtv = np.zeros(m.size)
-
-        for freq in self.survey.freqs:
-            AT = self.getA(freq).T
-            ATinv = self.Solver(AT, **self.solverOpts)
-
-            for src in self.survey.getSrcByFreq(freq):
-                ftype = self._fieldType + 'Solution'
-                u_src = f[src, ftype]
-
-                for rx in src.rxList:
-                    PTv = rx.projectFieldsDeriv(src, self.mesh, f, v[src, rx], adjoint=True) # wrt u, need possibility wrt m
-
-                    df_duTFun = getattr(f, '_%sDeriv_u'%rx.projField, None)
-                    df_duT = df_duTFun(src, PTv, adjoint=True)
-                    
-                    ATinvdf_duT = ATinv * df_duT
-
-                    dA_dmT = self.getADeriv_m(freq, u_src, ATinvdf_duT, adjoint=True)
-                    dRHS_dmT = self.getRHSDeriv_m(freq,src, ATinvdf_duT, adjoint=True)
-                    du_dmT = -dA_dmT + dRHS_dmT
-
-                    df_dmFun = getattr(f, '_%sDeriv_m'%rx.projField, None)
-                    dfT_dm = df_dmFun(src, PTv, adjoint=True)
-
-                    du_dmT += dfT_dm
-
-                    real_or_imag = rx.projComp
-                    if real_or_imag is 'real':
-                        Jtv +=   np.array(du_dmT,dtype=complex).real
-                    elif real_or_imag is 'imag':
-                        Jtv += - np.array(du_dmT,dtype=complex).real
-                    else:
-                        raise Exception('Must be real or imag')
-
-        return Jtv
-
-    def getSourceTerm(self, freq):
-        """
-            Evaluates the sources for a given frequency and puts them in matrix form
-
-            :param float freq: Frequency
-            :rtype: numpy.ndarray (nE or nF, nSrc)
-            :return: S_m, S_e
-        """
-        Srcs = self.survey.getSrcByFreq(freq)
-        if self._eqLocs is 'FE':
-            S_m = np.zeros((self.mesh.nF,len(Srcs)), dtype=complex)
-            S_e = np.zeros((self.mesh.nE,len(Srcs)), dtype=complex)
-        elif self._eqLocs is 'EF':
-            S_m = np.zeros((self.mesh.nE,len(Srcs)), dtype=complex)
-            S_e = np.zeros((self.mesh.nF,len(Srcs)), dtype=complex)
-
-        for i, src in enumerate(Srcs):
-            smi, sei = src.eval(self)
-            S_m[:,i] = S_m[:,i] + smi
-            S_e[:,i] = S_e[:,i] + sei
-
-        return S_m, S_e
-
-
-##########################################################################################
-################################ E-B Formulation #########################################
-##########################################################################################
-
-class Problem_e(BaseFDEMProblem):
-    """
-        By eliminating the magnetic flux density using
-
-            .. math ::
-
-                \mathbf{b} = \\frac{1}{i \omega}\\left(-\mathbf{C} \mathbf{e} + \mathbf{s_m}\\right)
-
-
-        we can write Maxwell's equations as a second order system in \\\(\\\mathbf{e}\\\) only:
-
-        .. math ::
-
-            \\left(\mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{C}+ i \omega \mathbf{M^e_{\sigma}} \\right)\mathbf{e} = \mathbf{C}^T \mathbf{M_{\mu^{-1}}^f}\mathbf{s_m} -i\omega\mathbf{M^e}\mathbf{s_e}
-
-        which we solve for \\\(\\\mathbf{e}\\\).
-    """
-
-    _fieldType = 'e'
-    _eqLocs    = 'FE'
-    fieldsPair = Fields_e
-
-    def __init__(self, mesh, **kwargs):
-        BaseFDEMProblem.__init__(self, mesh, **kwargs)
-
-    def getA(self, freq):
-        """
-            .. math ::
-                \mathbf{A} = \mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{C} + i \omega \mathbf{M^e_{\sigma}}
-
-            :param float freq: Frequency
-            :rtype: scipy.sparse.csr_matrix
-            :return: A
-        """
-        MfMui = self.MfMui
-        MeSigma = self.MeSigma
-        C = self.mesh.edgeCurl
-
-        return C.T*MfMui*C + 1j*omega(freq)*MeSigma
-
-
-    def getADeriv_m(self, freq, u, v, adjoint=False):
-        dsig_dm = self.curModel.sigmaDeriv
-        dMe_dsig = self.MeSigmaDeriv(u)
-
-        if adjoint:
-            return 1j * omega(freq) * ( dMe_dsig.T * v )
-
-        return 1j * omega(freq) * ( dMe_dsig * v )
-
-    def getRHS(self, freq):
-        """
-            .. math ::
-                \mathbf{RHS} = \mathbf{C}^T \mathbf{M_{\mu^{-1}}^f}\mathbf{s_m} -i\omega\mathbf{M_e}\mathbf{s_e}
-
-            :param float freq: Frequency
-            :rtype: numpy.ndarray (nE, nSrc)
-            :return: RHS
-        """
-
-        S_m, S_e = self.getSourceTerm(freq)
-        C = self.mesh.edgeCurl
-        MfMui = self.MfMui
-
-        RHS = C.T * (MfMui * S_m) -1j * omega(freq) * S_e
-
-        return RHS
-
-    def getRHSDeriv_m(self, freq, src, v, adjoint=False):
-        C = self.mesh.edgeCurl
-        MfMui = self.MfMui
-        S_mDeriv, S_eDeriv = src.evalDeriv(self, adjoint)
-
-        if adjoint:
-            dRHS = MfMui * (C * v)
-            return S_mDeriv(dRHS) - 1j * omega(freq) * S_eDeriv(v)
-
-        else:
-            return C.T * (MfMui * S_mDeriv(v)) -1j * omega(freq) * S_eDeriv(v)
-
-
-class Problem_b(BaseFDEMProblem):
-    """
-        We eliminate \\\(\\\mathbf{e}\\\) using
-
-        .. math ::
-
-             \mathbf{e} = \mathbf{M^e_{\sigma}}^{-1} \\left(\mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{b} - \mathbf{s_e}\\right)
-
-        and solve for \\\(\\\mathbf{b}\\\) using:
-
-        .. math ::
-
-            \\left(\mathbf{C} \mathbf{M^e_{\sigma}}^{-1} \mathbf{C}^T \mathbf{M_{\mu^{-1}}^f}  + i \omega \\right)\mathbf{b} = \mathbf{s_m} + \mathbf{M^e_{\sigma}}^{-1}\mathbf{M^e}\mathbf{s_e}
-
-        .. note ::
-            The inverse problem will not work with full anisotropy
-    """
-
-    _fieldType = 'b'
-    _eqLocs    = 'FE'
-    fieldsPair = Fields_b
-
-    def __init__(self, mesh, **kwargs):
-        BaseFDEMProblem.__init__(self, mesh, **kwargs)
-
-    def getA(self, freq):
-        """
-            .. math ::
-                \mathbf{A} = \mathbf{C} \mathbf{M^e_{\sigma}}^{-1} \mathbf{C}^T \mathbf{M_{\mu^{-1}}^f}  + i \omega
-
-            :param float freq: Frequency
-            :rtype: scipy.sparse.csr_matrix
-            :return: A
-        """
-
-        MfMui = self.MfMui
-        MeSigmaI = self.MeSigmaI
-        C = self.mesh.edgeCurl
-        iomega = 1j * omega(freq) * sp.eye(self.mesh.nF)
-
-        A = C * (MeSigmaI * (C.T * MfMui)) + iomega
-
-        if self._makeASymmetric is True:
-            return MfMui.T*A
-        return A
-
-    def getADeriv_m(self, freq, u, v, adjoint=False):
-
-        MfMui = self.MfMui
-        C = self.mesh.edgeCurl
-        MeSigmaIDeriv = self.MeSigmaIDeriv
-        vec = C.T * (MfMui * u)
-
-        MeSigmaIDeriv = MeSigmaIDeriv(vec)
-
-        if adjoint:
-            if self._makeASymmetric is True:
-                v = MfMui * v
-            return MeSigmaIDeriv.T * (C.T * v)
-
-        if self._makeASymmetric is True:
-            return MfMui.T * ( C * ( MeSigmaIDeriv * v ) )
-        return C * ( MeSigmaIDeriv * v )
-
-
-    def getRHS(self, freq):
-        """
-            .. math ::
-                \mathbf{RHS} = \mathbf{s_m} + \mathbf{M^e_{\sigma}}^{-1}\mathbf{s_e}
-
-            :param float freq: Frequency
-            :rtype: numpy.ndarray (nE, nSrc)
-            :return: RHS
-        """
-
-        S_m, S_e = self.getSourceTerm(freq)
-        C = self.mesh.edgeCurl
-        MeSigmaI = self.MeSigmaI
-
-        RHS = S_m + C * ( MeSigmaI * S_e )
-
-        if self._makeASymmetric is True:
-            MfMui = self.MfMui
-            return MfMui.T * RHS
-
-        return RHS
-
-    def getRHSDeriv_m(self, freq, src, v, adjoint=False):
-        C = self.mesh.edgeCurl
-        S_m, S_e = src.eval(self)
-        MfMui = self.MfMui
-
-        if self._makeASymmetric and adjoint:
-            v = self.MfMui * v
-
-        MeSigmaIDeriv = self.MeSigmaIDeriv(S_e)
-        S_mDeriv, S_eDeriv = src.evalDeriv(self, adjoint)
-
-        if not adjoint:
-            RHSderiv = C * (MeSigmaIDeriv * v)
-            SrcDeriv = S_mDeriv(v) + C * (self.MeSigmaI * S_eDeriv(v))
-        elif adjoint:
-            RHSderiv = MeSigmaIDeriv.T * (C.T * v)
-            SrcDeriv = S_mDeriv(v) + self.MeSigmaI.T * (C.T * S_eDeriv(v))
-
-        if self._makeASymmetric is True and not adjoint:
-            return MfMui.T * (SrcDeriv + RHSderiv)
-
-        return RHSderiv + SrcDeriv
-
-
-
-##########################################################################################
-################################ H-J Formulation #########################################
-##########################################################################################
-
-
-class Problem_j(BaseFDEMProblem):
-    """
-        We eliminate \\\(\\\mathbf{h}\\\) using
-
-        .. math ::
-
-            \mathbf{h} = \\frac{1}{i \omega} \mathbf{M_{\mu}^e}^{-1} \\left(-\mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{j}  + \mathbf{M^e} \mathbf{s_m} \\right)
-
-        and solve for \\\(\\\mathbf{j}\\\) using
-
-        .. math ::
-
-            \\left(\mathbf{C} \mathbf{M_{\mu}^e}^{-1} \mathbf{C}^T \mathbf{M_{\\rho}^f} + i \omega\\right)\mathbf{j} = \mathbf{C} \mathbf{M_{\mu}^e}^{-1} \mathbf{M^e} \mathbf{s_m} -i\omega\mathbf{s_e}
-
-        .. note::
-            This implementation does not yet work with full anisotropy!!
-
-    """
-
-    _fieldType = 'j'
-    _eqLocs    = 'EF'
-    fieldsPair = Fields_j
-
-    def __init__(self, mesh, **kwargs):
-        BaseFDEMProblem.__init__(self, mesh, **kwargs)
-
-    def getA(self, freq):
-        """
-            .. math ::
-                    \\mathbf{A} = \\mathbf{C}  \\mathbf{M^e_{mu^{-1}}} \\mathbf{C}^T \\mathbf{M^f_{\\sigma^{-1}}}  + i\\omega
-
-            :param float freq: Frequency
-            :rtype: scipy.sparse.csr_matrix
-            :return: A
-        """
-
-        MeMuI = self.MeMuI
-        MfRho = self.MfRho
-        C = self.mesh.edgeCurl
-        iomega = 1j * omega(freq) * sp.eye(self.mesh.nF)
-
-        A = C * MeMuI * C.T * MfRho + iomega
-
-        if self._makeASymmetric is True:
-            return MfRho.T*A
-        return A
-
-
-    def getADeriv_m(self, freq, u, v, adjoint=False):
-        """
-            In this case, we assume that electrical conductivity, \\\(\\\sigma\\\) is the physical property of interest (i.e. \\\(\\\sigma\\\) = model.transform). Then we want
-
-            .. math ::
-
-                \\frac{\mathbf{A(\sigma)} \mathbf{v}}{d \\mathbf{m}} &= \\mathbf{C}  \\mathbf{M^e_{mu^{-1}}} \\mathbf{C^T} \\frac{d \\mathbf{M^f_{\\sigma^{-1}}}}{d \\mathbf{m}}
-                &= \\mathbf{C}  \\mathbf{M^e_{mu}^{-1}} \\mathbf{C^T} \\frac{d \\mathbf{M^f_{\\sigma^{-1}}}}{d \\mathbf{\\sigma^{-1}}} \\frac{d \\mathbf{\\sigma^{-1}}}{d \\mathbf{\\sigma}} \\frac{d \\mathbf{\\sigma}}{d \\mathbf{m}}
-        """
-
-        MeMuI = self.MeMuI
-        MfRho = self.MfRho
-        C = self.mesh.edgeCurl
-        MfRhoDeriv_m = self.MfRhoDeriv(u)
-
-        if adjoint:
-            if self._makeASymmetric is True:
-                v = MfRho * v
-            return MfRhoDeriv_m.T * (C * (MeMuI.T * (C.T * v)))
-
-        if self._makeASymmetric is True:
-            return MfRho.T * (C * ( MeMuI * (C.T * (MfRhoDeriv_m * v) )))
-        return C * (MeMuI * (C.T * (MfRhoDeriv_m * v)))
-
-
-    def getRHS(self, freq):
-        """
-            .. math ::
-
-                \mathbf{RHS} = \mathbf{C} \mathbf{M_{\mu}^e}^{-1}\mathbf{s_m} -i\omega \mathbf{s_e}
-            :param float freq: Frequency
-            :rtype: numpy.ndarray (nE, nSrc)
-            :return: RHS
-        """
-
-        S_m, S_e = self.getSourceTerm(freq)
-        C = self.mesh.edgeCurl
-        MeMuI = self.MeMuI
-
-        RHS = C * (MeMuI * S_m) - 1j * omega(freq) * S_e
-        if self._makeASymmetric is True:
-            MfRho = self.MfRho
-            return MfRho.T*RHS
-
-        return RHS
-
-    def getRHSDeriv_m(self, freq, src, v, adjoint=False):
-        C = self.mesh.edgeCurl
-        MeMuI = self.MeMuI
-        S_mDeriv, S_eDeriv = src.evalDeriv(self, adjoint)
-
-        if adjoint:
-            if self._makeASymmetric:
-                MfRho = self.MfRho
-                v = MfRho*v
-            return S_mDeriv(MeMuI.T * (C.T * v)) - 1j * omega(freq) * S_eDeriv(v)
-
-        else:
-            RHSDeriv = C * (MeMuI * S_mDeriv(v)) - 1j * omega(freq) * S_eDeriv(v)
-
-            if self._makeASymmetric:
-                MfRho = self.MfRho
-                return MfRho.T * RHSDeriv
-            return RHSDeriv
-
-
-
-
-class Problem_h(BaseFDEMProblem):
-    """
-        We eliminate \\\(\\\mathbf{j}\\\) using
-
-        .. math ::
-
-            \mathbf{j} = \mathbf{C} \mathbf{h} - \mathbf{s_e}
-
-        and solve for \\\(\\\mathbf{h}\\\) using
-
-        .. math ::
-
-            \\left(\mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{C} + i \omega \mathbf{M_{\mu}^e}\\right) \mathbf{h} = \mathbf{M^e} \mathbf{s_m} + \mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{s_e}
-
-    """
-
-    _fieldType = 'h'
-    _eqLocs    = 'EF'
-    fieldsPair = Fields_h
-
-    def __init__(self, mesh, **kwargs):
-        BaseFDEMProblem.__init__(self, mesh, **kwargs)
-
-    def getA(self, freq):
-        """
-            .. math ::
-
-                \mathbf{A} = \mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{C} + i \omega \mathbf{M_{\mu}^e}
-
-            :param float freq: Frequency
-            :rtype: scipy.sparse.csr_matrix
-            :return: A
-        """
-
-        MeMu = self.MeMu
-        MfRho = self.MfRho
-        C = self.mesh.edgeCurl
-
-        return C.T * (MfRho * C) + 1j*omega(freq)*MeMu
-
-    def getADeriv_m(self, freq, u, v, adjoint=False):
-
-        MeMu = self.MeMu
-        C = self.mesh.edgeCurl
-        MfRhoDeriv_m = self.MfRhoDeriv(C*u)
-
-        if adjoint:
-            return MfRhoDeriv_m.T * (C * v)
-        return C.T * (MfRhoDeriv_m * v)
-
-    def getRHS(self, freq):
-        """
-            .. math ::
-
-                \mathbf{RHS} = \mathbf{M^e} \mathbf{s_m} + \mathbf{C}^T \mathbf{M_{\\rho}^f} \mathbf{s_e}
-
-            :param float freq: Frequency
-            :rtype: numpy.ndarray (nE, nSrc)
-            :return: RHS
-        """
-
-        S_m, S_e = self.getSourceTerm(freq)
-        C = self.mesh.edgeCurl
-        MfRho  = self.MfRho
-
-        RHS = S_m + C.T * ( MfRho * S_e )
-
-        return RHS
-
-    def getRHSDeriv_m(self, freq, src, v, adjoint=False):
-        _, S_e = src.eval(self)
-        C = self.mesh.edgeCurl
-        MfRho  = self.MfRho
-
-        MfRhoDeriv = self.MfRhoDeriv(S_e)
-        if not adjoint:
-            RHSDeriv = C.T * (MfRhoDeriv * v)
-        elif adjoint:
-            RHSDeriv = MfRhoDeriv.T * (C * v)
-
-        S_mDeriv, S_eDeriv = src.evalDeriv(self, adjoint)
-
-        return RHSDeriv + S_mDeriv(v) + C.T * (MfRho * S_eDeriv(v))
-

SimPEG/EM/FDEM/ProblemFDEM.py

@@ -0,0 +1,689 @@
+from SimPEG import Problem, Utils, np, sp, Solver as SimpegSolver
+from scipy.constants import mu_0
+from SurveyFDEM import Survey as SurveyFDEM
+from FieldsFDEM import Fields, Fields3D_e, Fields3D_b, Fields3D_h, Fields3D_j
+from SimPEG.EM.Base import BaseEMProblem
+from SimPEG.EM.Utils import omega
+
+
+class BaseFDEMProblem(BaseEMProblem):
+    """
+        We start by looking at Maxwell's equations in the electric
+        field \\\(\\\mathbf{e}\\\) and the magnetic flux
+        density \\\(\\\mathbf{b}\\\)
+
+        .. math ::
+
+            \mathbf{C} \mathbf{e} + i \omega \mathbf{b} = \mathbf{s_m} \\\\
+            {\mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f} \mathbf{b} - \mathbf{M_{\sigma}^e} \mathbf{e} = \mathbf{s_e}}
+
+        if using the E-B formulation (:code:`Problem3D_e`
+        or :code:`Problem3D_b`). Note that in this case, :math:`\mathbf{s_e}` is an integrated quantity.
+
+        If we write Maxwell's equations in terms of
+        \\\(\\\mathbf{h}\\\) and current density \\\(\\\mathbf{j}\\\)
+
+        .. math ::
+
+            \mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{j} + i \omega \mathbf{M_{\mu}^e} \mathbf{h} = \mathbf{s_m} \\\\
+            \mathbf{C} \mathbf{h} - \mathbf{j} = \mathbf{s_e}
+
+        if using the H-J formulation (:code:`Problem3D_j` or :code:`Problem3D_h`). Note that here, :math:`\mathbf{s_m}` is an integrated quantity.
+
+        The problem performs the elimination so that we are solving the system for \\\(\\\mathbf{e},\\\mathbf{b},\\\mathbf{j} \\\) or \\\(\\\mathbf{h}\\\)
+    """
+
+    surveyPair = SurveyFDEM
+    fieldsPair = Fields
+
+    def fields(self, m):
+        """
+        Solve the forward problem for the fields.
+
+        :param numpy.array m: inversion model (nP,)
+        :rtype numpy.array:
+        :return f: forward solution
+        """
+
+        self.curModel = m
+        f = self.fieldsPair(self.mesh, self.survey)
+
+        for freq in self.survey.freqs:
+            A = self.getA(freq)
+            rhs = self.getRHS(freq)
+            Ainv = self.Solver(A, **self.solverOpts)
+            u = Ainv * rhs
+            Srcs = self.survey.getSrcByFreq(freq)
+            f[Srcs, self._solutionType] = u
+            Ainv.clean()
+        return f
+
+    def Jvec(self, m, v, f=None):
+        """
+        Sensitivity times a vector.
+
+        :param numpy.array m: inversion model (nP,)
+        :param numpy.array v: vector which we take sensitivity product with (nP,)
+        :param SimPEG.EM.FDEM.Fields u: fields object
+        :rtype numpy.array:
+        :return: Jv (ndata,)
+        """
+
+        if f is None:
+           f = self.fields(m)
+
+        self.curModel = m
+
+        # Jv = self.dataPair(self.survey)
+        Jv = []
+
+        for freq in self.survey.freqs:
+            A = self.getA(freq)
+            Ainv = self.Solver(A, **self.solverOpts) # create the concept of Ainv (actually a solve)
+
+            for src in self.survey.getSrcByFreq(freq):
+                u_src = f[src, self._solutionType]
+                dA_dm_v = self.getADeriv(freq, u_src, v)
+                dRHS_dm_v = self.getRHSDeriv(freq, src, v)
+                du_dm_v = Ainv * ( - dA_dm_v + dRHS_dm_v )
+
+                for rx in src.rxList:
+                    df_dmFun = getattr(f, '_{0}Deriv'.format(rx.projField), None)
+                    df_dm_v = df_dmFun(src, du_dm_v, v, adjoint=False)
+                    Jv.append(rx.evalDeriv(src, self.mesh, f, df_dm_v))
+            Ainv.clean()
+        return np.hstack(Jv)
+
+    def Jtvec(self, m, v, f=None):
+        """
+        Sensitivity transpose times a vector
+
+        :param numpy.array m: inversion model (nP,)
+        :param numpy.array v: vector which we take adjoint product with (nP,)
+        :param SimPEG.EM.FDEM.Fields u: fields object
+        :rtype numpy.array:
+        :return: Jv (ndata,)
+        """
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv = np.zeros(m.size)
+
+        for freq in self.survey.freqs:
+            AT = self.getA(freq).T
+            ATinv = self.Solver(AT, **self.solverOpts)
+
+            for src in self.survey.getSrcByFreq(freq):
+                u_src = f[src, self._solutionType]
+
+                for rx in src.rxList:
+                    PTv = rx.evalDeriv(src, self.mesh, f, v[src, rx], adjoint=True) # wrt f, need possibility wrt m
+
+                    df_duTFun = getattr(f, '_{0}Deriv'.format(rx.projField), None)
+                    df_duT, df_dmT = df_duTFun(src, None, PTv, adjoint=True)
+
+                    ATinvdf_duT = ATinv * df_duT
+
+                    dA_dmT = self.getADeriv(freq, u_src, ATinvdf_duT, adjoint=True)
+                    dRHS_dmT = self.getRHSDeriv(freq, src, ATinvdf_duT, adjoint=True)
+                    du_dmT = -dA_dmT + dRHS_dmT
+
+                    df_dmT = df_dmT + du_dmT
+
+                    # TODO: this should be taken care of by the reciever?
+                    if rx.component is 'real':
+                        Jtv +=   np.array(df_dmT, dtype=complex).real
+                    elif rx.component is 'imag':
+                        Jtv += - np.array(df_dmT, dtype=complex).real
+                    else:
+                        raise Exception('Must be real or imag')
+
+            ATinv.clean()
+
+        return Utils.mkvc(Jtv)
+
+    def getSourceTerm(self, freq):
+        """
+        Evaluates the sources for a given frequency and puts them in matrix form
+
+        :param float freq: Frequency
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: s_m, s_e (nE or nF, nSrc)
+        """
+        Srcs = self.survey.getSrcByFreq(freq)
+        if self._formulation is 'EB':
+            s_m = np.zeros((self.mesh.nF,len(Srcs)), dtype=complex)
+            s_e = np.zeros((self.mesh.nE,len(Srcs)), dtype=complex)
+        elif self._formulation is 'HJ':
+            s_m = np.zeros((self.mesh.nE,len(Srcs)), dtype=complex)
+            s_e = np.zeros((self.mesh.nF,len(Srcs)), dtype=complex)
+
+        for i, src in enumerate(Srcs):
+            smi, sei = src.eval(self)
+            s_m[:,i] = s_m[:,i] + smi
+            s_e[:,i] = s_e[:,i] + sei
+
+        return s_m, s_e
+
+
+##########################################################################################
+################################ E-B Formulation #########################################
+##########################################################################################
+
+class Problem3D_e(BaseFDEMProblem):
+    """
+    By eliminating the magnetic flux density using
+
+        .. math ::
+
+            \mathbf{b} = \\frac{1}{i \omega}\\left(-\mathbf{C} \mathbf{e} + \mathbf{s_m}\\right)
+
+
+    we can write Maxwell's equations as a second order system in \\\(\\\mathbf{e}\\\) only:
+
+    .. math ::
+
+        \\left(\mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f} \mathbf{C}+ i \omega \mathbf{M^e_{\sigma}} \\right)\mathbf{e} = \mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f}\mathbf{s_m} -i\omega\mathbf{M^e}\mathbf{s_e}
+
+    which we solve for :math:`\mathbf{e}`.
+
+    :param SimPEG.Mesh mesh: mesh
+    """
+
+    _solutionType = 'eSolution'
+    _formulation  = 'EB'
+    fieldsPair    = Fields3D_e
+
+    def __init__(self, mesh, **kwargs):
+        BaseFDEMProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self, freq):
+        """
+        System matrix
+
+        .. math ::
+            \mathbf{A} = \mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f} \mathbf{C} + i \omega \mathbf{M^e_{\sigma}}
+
+        :param float freq: Frequency
+        :rtype: scipy.sparse.csr_matrix
+        :return: A
+        """
+
+        MfMui = self.MfMui
+        MeSigma = self.MeSigma
+        C = self.mesh.edgeCurl
+
+        return C.T*MfMui*C + 1j*omega(freq)*MeSigma
+
+
+    def getADeriv(self, freq, u, v, adjoint=False):
+        """
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        .. math ::
+            \\frac{\mathbf{A}(\mathbf{m}) \mathbf{v}}{d \mathbf{m}} = i \omega \\frac{d \mathbf{M^e_{\sigma}}\mathbf{v} }{d\mathbf{m}}
+
+        :param float freq: frequency
+        :param numpy.ndarray u: solution vector (nE,)
+        :param numpy.ndarray v: vector to take prodct with (nP,) or (nD,) for adjoint
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: derivative of the system matrix times a vector (nP,) or adjoint (nD,)
+        """
+
+        dsig_dm = self.curModel.sigmaDeriv
+        dMe_dsig = self.MeSigmaDeriv(u)
+
+        if adjoint:
+            return 1j * omega(freq) * ( dMe_dsig.T * v )
+
+        return 1j * omega(freq) * ( dMe_dsig * v )
+
+    def getRHS(self, freq):
+        """
+        Right hand side for the system
+
+        .. math ::
+            \mathbf{RHS} = \mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f}\mathbf{s_m} -i\omega\mathbf{M_e}\mathbf{s_e}
+
+        :param float freq: Frequency
+        :rtype: numpy.ndarray
+        :return: RHS (nE, nSrc)
+        """
+
+        s_m, s_e = self.getSourceTerm(freq)
+        C = self.mesh.edgeCurl
+        MfMui = self.MfMui
+
+        return C.T * (MfMui * s_m) -1j * omega(freq) * s_e
+
+    def getRHSDeriv(self, freq, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+
+        :param float freq: frequency
+        :param SimPEG.EM.FDEM.Src src: FDEM source
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of rhs deriv with a vector
+        """
+
+        C = self.mesh.edgeCurl
+        MfMui = self.MfMui
+        s_mDeriv, s_eDeriv = src.evalDeriv(self, adjoint=adjoint)
+
+        if adjoint:
+            dRHS = MfMui * (C * v)
+            return s_mDeriv(dRHS) - 1j * omega(freq) * s_eDeriv(v)
+
+        else:
+            return C.T * (MfMui * s_mDeriv(v)) -1j * omega(freq) * s_eDeriv(v)
+
+
+class Problem3D_b(BaseFDEMProblem):
+    """
+    We eliminate :math:`\mathbf{e}` using
+
+    .. math ::
+
+         \mathbf{e} = \mathbf{M^e_{\sigma}}^{-1} \\left(\mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f} \mathbf{b} - \mathbf{s_e}\\right)
+
+    and solve for :math:`\mathbf{b}` using:
+
+    .. math ::
+
+        \\left(\mathbf{C} \mathbf{M^e_{\sigma}}^{-1} \mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f}  + i \omega \\right)\mathbf{b} = \mathbf{s_m} + \mathbf{M^e_{\sigma}}^{-1}\mathbf{M^e}\mathbf{s_e}
+
+    .. note ::
+        The inverse problem will not work with full anisotropy
+
+    :param SimPEG.Mesh mesh: mesh
+    """
+
+    _solutionType = 'bSolution'
+    _formulation  = 'EB'
+    fieldsPair    = Fields3D_b
+
+    def __init__(self, mesh, **kwargs):
+        BaseFDEMProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self, freq):
+        """
+        System matrix
+
+        .. math ::
+            \mathbf{A} = \mathbf{C} \mathbf{M^e_{\sigma}}^{-1} \mathbf{C}^{\\top} \mathbf{M_{\mu^{-1}}^f}  + i \omega
+
+        :param float freq: Frequency
+        :rtype: scipy.sparse.csr_matrix
+        :return: A
+        """
+
+        MfMui = self.MfMui
+        MeSigmaI = self.MeSigmaI
+        C = self.mesh.edgeCurl
+        iomega = 1j * omega(freq) * sp.eye(self.mesh.nF)
+
+        A = C * (MeSigmaI * (C.T * MfMui)) + iomega
+
+        if self._makeASymmetric is True:
+            return MfMui.T*A
+        return A
+
+    def getADeriv(self, freq, u, v, adjoint=False):
+
+        """
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        .. math ::
+            \\frac{\mathbf{A}(\mathbf{m}) \mathbf{v}}{d \mathbf{m}} = \mathbf{C} \\frac{\mathbf{M^e_{\sigma}} \mathbf{v}}{d\mathbf{m}}
+
+        :param float freq: frequency
+        :param numpy.ndarray u: solution vector (nF,)
+        :param numpy.ndarray v: vector to take prodct with (nP,) or (nD,) for adjoint
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: derivative of the system matrix times a vector (nP,) or adjoint (nD,)
+        """
+
+        MfMui = self.MfMui
+        C = self.mesh.edgeCurl
+        MeSigmaIDeriv = self.MeSigmaIDeriv
+        vec = C.T * (MfMui * u)
+
+        MeSigmaIDeriv = MeSigmaIDeriv(vec)
+
+        if adjoint:
+            if self._makeASymmetric is True:
+                v = MfMui * v
+            return MeSigmaIDeriv.T * (C.T * v)
+
+        if self._makeASymmetric is True:
+            return MfMui.T * ( C * ( MeSigmaIDeriv * v ) )
+        return C * ( MeSigmaIDeriv * v )
+
+
+    def getRHS(self, freq):
+        """
+        Right hand side for the system
+
+        .. math ::
+            \mathbf{RHS} = \mathbf{s_m} + \mathbf{M^e_{\sigma}}^{-1}\mathbf{s_e}
+
+        :param float freq: Frequency
+        :rtype: numpy.ndarray
+        :return: RHS (nE, nSrc)
+        """
+
+        s_m, s_e = self.getSourceTerm(freq)
+        C = self.mesh.edgeCurl
+        MeSigmaI = self.MeSigmaI
+
+        RHS = s_m + C * ( MeSigmaI * s_e )
+
+        if self._makeASymmetric is True:
+            MfMui = self.MfMui
+            return MfMui.T * RHS
+
+        return RHS
+
+    def getRHSDeriv(self, freq, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+
+        :param float freq: frequency
+        :param SimPEG.EM.FDEM.Src src: FDEM source
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of rhs deriv with a vector
+        """
+
+        C = self.mesh.edgeCurl
+        s_m, s_e = src.eval(self)
+        MfMui = self.MfMui
+
+        if self._makeASymmetric and adjoint:
+            v = self.MfMui * v
+
+        MeSigmaIDeriv = self.MeSigmaIDeriv(s_e)
+        s_mDeriv, s_eDeriv = src.evalDeriv(self, adjoint=adjoint)
+
+        if not adjoint:
+            RHSderiv = C * (MeSigmaIDeriv * v)
+            SrcDeriv = s_mDeriv(v) + C * (self.MeSigmaI * s_eDeriv(v))
+        elif adjoint:
+            RHSderiv = MeSigmaIDeriv.T * (C.T * v)
+            SrcDeriv = s_mDeriv(v) + self.MeSigmaI.T * (C.T * s_eDeriv(v))
+
+        if self._makeASymmetric is True and not adjoint:
+            return MfMui.T * (SrcDeriv + RHSderiv)
+
+        return RHSderiv + SrcDeriv
+
+
+
+##########################################################################################
+################################ H-J Formulation #########################################
+##########################################################################################
+
+
+class Problem3D_j(BaseFDEMProblem):
+    """
+    We eliminate \\\(\\\mathbf{h}\\\) using
+
+    .. math ::
+
+        \mathbf{h} = \\frac{1}{i \omega} \mathbf{M_{\mu}^e}^{-1} \\left(-\mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{j}  + \mathbf{M^e} \mathbf{s_m} \\right)
+
+    and solve for \\\(\\\mathbf{j}\\\) using
+
+    .. math ::
+
+        \\left(\mathbf{C} \mathbf{M_{\mu}^e}^{-1} \mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} + i \omega\\right)\mathbf{j} = \mathbf{C} \mathbf{M_{\mu}^e}^{-1} \mathbf{M^e} \mathbf{s_m} -i\omega\mathbf{s_e}
+
+    .. note::
+        This implementation does not yet work with full anisotropy!!
+
+    :param SimPEG.Mesh mesh: mesh
+    """
+
+    _solutionType = 'jSolution'
+    _formulation  = 'HJ'
+    fieldsPair    = Fields3D_j
+
+    def __init__(self, mesh, **kwargs):
+        BaseFDEMProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self, freq):
+        """
+        System matrix
+
+        .. math ::
+                \\mathbf{A} = \\mathbf{C}  \\mathbf{M^e_{\\mu^{-1}}} \\mathbf{C}^{\\top} \\mathbf{M^f_{\\sigma^{-1}}}  + i\\omega
+
+        :param float freq: Frequency
+        :rtype: scipy.sparse.csr_matrix
+        :return: A
+        """
+
+        MeMuI = self.MeMuI
+        MfRho = self.MfRho
+        C = self.mesh.edgeCurl
+        iomega = 1j * omega(freq) * sp.eye(self.mesh.nF)
+
+        A = C * MeMuI * C.T * MfRho + iomega
+
+        if self._makeASymmetric is True:
+            return MfRho.T*A
+        return A
+
+
+    def getADeriv(self, freq, u, v, adjoint=False):
+        """
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        In this case, we assume that electrical conductivity, :math:`\sigma` is the physical property of interest (i.e. :math:`\sigma` = model.transform). Then we want
+
+        .. math ::
+
+            \\frac{\mathbf{A(\sigma)} \mathbf{v}}{d \mathbf{m}} = \mathbf{C}  \mathbf{M^e_{mu^{-1}}} \mathbf{C^{\\top}} \\frac{d \mathbf{M^f_{\sigma^{-1}}}\mathbf{v} }{d \mathbf{m}}
+
+        :param float freq: frequency
+        :param numpy.ndarray u: solution vector (nF,)
+        :param numpy.ndarray v: vector to take prodct with (nP,) or (nD,) for adjoint
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: derivative of the system matrix times a vector (nP,) or adjoint (nD,)
+        """
+
+        MeMuI = self.MeMuI
+        MfRho = self.MfRho
+        C = self.mesh.edgeCurl
+        MfRhoDeriv = self.MfRhoDeriv(u)
+
+        if adjoint:
+            if self._makeASymmetric is True:
+                v = MfRho * v
+            return MfRhoDeriv.T * (C * (MeMuI.T * (C.T * v)))
+
+        if self._makeASymmetric is True:
+            return MfRho.T * (C * ( MeMuI * (C.T * (MfRhoDeriv * v) )))
+        return C * (MeMuI * (C.T * (MfRhoDeriv * v)))
+
+
+    def getRHS(self, freq):
+        """
+        Right hand side for the system
+
+        .. math ::
+
+            \mathbf{RHS} = \mathbf{C} \mathbf{M_{\mu}^e}^{-1}\mathbf{s_m} -i\omega \mathbf{s_e}
+
+        :param float freq: Frequency
+        :rtype: numpy.ndarray (nE, nSrc)
+        :return: RHS
+        """
+
+        s_m, s_e = self.getSourceTerm(freq)
+        C = self.mesh.edgeCurl
+        MeMuI = self.MeMuI
+
+        RHS = C * (MeMuI * s_m) - 1j * omega(freq) * s_e
+        if self._makeASymmetric is True:
+            MfRho = self.MfRho
+            return MfRho.T*RHS
+
+        return RHS
+
+    def getRHSDeriv(self, freq, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+
+        :param float freq: frequency
+        :param SimPEG.EM.FDEM.Src src: FDEM source
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of rhs deriv with a vector
+        """
+
+        C = self.mesh.edgeCurl
+        MeMuI = self.MeMuI
+        s_mDeriv, s_eDeriv = src.evalDeriv(self, adjoint=adjoint)
+
+        if adjoint:
+            if self._makeASymmetric:
+                MfRho = self.MfRho
+                v = MfRho*v
+            return s_mDeriv(MeMuI.T * (C.T * v)) - 1j * omega(freq) * s_eDeriv(v)
+
+        else:
+            RHSDeriv = C * (MeMuI * s_mDeriv(v)) - 1j * omega(freq) * s_eDeriv(v)
+
+            if self._makeASymmetric:
+                MfRho = self.MfRho
+                return MfRho.T * RHSDeriv
+            return RHSDeriv
+
+
+
+
+class Problem3D_h(BaseFDEMProblem):
+    """
+    We eliminate \\\(\\\mathbf{j}\\\) using
+
+    .. math ::
+
+        \mathbf{j} = \mathbf{C} \mathbf{h} - \mathbf{s_e}
+
+    and solve for \\\(\\\mathbf{h}\\\) using
+
+    .. math ::
+
+        \\left(\mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{C} + i \omega \mathbf{M_{\mu}^e}\\right) \mathbf{h} = \mathbf{M^e} \mathbf{s_m} + \mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{s_e}
+
+    :param SimPEG.Mesh mesh: mesh
+    """
+
+    _solutionType = 'hSolution'
+    _formulation  = 'HJ'
+    fieldsPair    = Fields3D_h
+
+    def __init__(self, mesh, **kwargs):
+        BaseFDEMProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self, freq):
+        """
+        System matrix
+
+        .. math::
+            \mathbf{A} = \mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{C} + i \omega \mathbf{M_{\mu}^e}
+
+        :param float freq: Frequency
+        :rtype: scipy.sparse.csr_matrix
+        :return: A
+        """
+
+        MeMu = self.MeMu
+        MfRho = self.MfRho
+        C = self.mesh.edgeCurl
+
+        return C.T * (MfRho * C) + 1j*omega(freq)*MeMu
+
+    def getADeriv(self, freq, u, v, adjoint=False):
+        """
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        .. math::
+            \\frac{\mathbf{A}(\mathbf{m}) \mathbf{v}}{d \mathbf{m}} = \mathbf{C}^{\\top}\\frac{d \mathbf{M^f_{\\rho}}\mathbf{v} }{d\mathbf{m}}
+
+        :param float freq: frequency
+        :param numpy.ndarray u: solution vector (nE,)
+        :param numpy.ndarray v: vector to take prodct with (nP,) or (nD,) for adjoint
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: derivative of the system matrix times a vector (nP,) or adjoint (nD,)
+        """
+
+        MeMu = self.MeMu
+        C = self.mesh.edgeCurl
+        MfRhoDeriv = self.MfRhoDeriv(C*u)
+
+        if adjoint:
+            return MfRhoDeriv.T * (C * v)
+        return C.T * (MfRhoDeriv * v)
+
+    def getRHS(self, freq):
+        """
+        Right hand side for the system
+
+        .. math ::
+
+            \mathbf{RHS} = \mathbf{M^e} \mathbf{s_m} + \mathbf{C}^{\\top} \mathbf{M_{\\rho}^f} \mathbf{s_e}
+
+        :param float freq: Frequency
+        :rtype: numpy.ndarray
+        :return: RHS (nE, nSrc)
+        """
+
+        s_m, s_e = self.getSourceTerm(freq)
+        C = self.mesh.edgeCurl
+        MfRho  = self.MfRho
+
+        return s_m + C.T * ( MfRho * s_e )
+
+    def getRHSDeriv(self, freq, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+
+        :param float freq: frequency
+        :param SimPEG.EM.FDEM.Src src: FDEM source
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of rhs deriv with a vector
+        """
+
+        _, s_e = src.eval(self)
+        C = self.mesh.edgeCurl
+        MfRho  = self.MfRho
+
+        MfRhoDeriv = self.MfRhoDeriv(s_e)
+        if not adjoint:
+            RHSDeriv = C.T * (MfRhoDeriv * v)
+        elif adjoint:
+            RHSDeriv = MfRhoDeriv.T * (C * v)
+
+        s_mDeriv, s_eDeriv = src.evalDeriv(self, adjoint=adjoint)
+
+        return RHSDeriv + s_mDeriv(v) + C.T * (MfRho * s_eDeriv(v))
+

SimPEG/EM/FDEM/RxFDEM.py

@@ -0,0 +1,126 @@
+import SimPEG
+from SimPEG import sp
+
+class BaseRx(SimPEG.Survey.BaseRx):
+    """
+    Frequency domain receiver base class
+
+    :param numpy.ndarray locs: receiver locations (ie. :code:`np.r_[x,y,z]`)
+    :param string orientation: receiver orientation 'x', 'y' or 'z'
+    :param string component: real or imaginary component 'real' or 'imag'
+    """
+
+    def __init__(self, locs, orientation=None, component=None):
+        assert(orientation in ['x','y','z']), "Orientation %s not known. Orientation must be in 'x', 'y', 'z'. Arbitrary orientations have not yet been implemented."%orientation
+        assert(component in ['real', 'imag']), "'component' must be 'real' or 'imag', not %s"%component
+
+        self.projComp = orientation
+        self.component = component
+
+        SimPEG.Survey.BaseRx.__init__(self, locs, rxType=None) #TODO: remove rxType from baseRx
+
+    def projGLoc(self, u):
+        """Grid Location projection (e.g. Ex Fy ...)"""
+        return u._GLoc(self.projField) + self.projComp
+
+    def eval(self, src, mesh, f):
+        """
+        Project fields to recievers to get data.
+
+        :param Source src: FDEM source
+        :param Mesh mesh: mesh used
+        :param Fields f: fields object
+        :rtype: numpy.ndarray
+        :return: fields projected to recievers
+        """
+
+        P = self.getP(mesh, self.projGLoc(f))
+        f_part_complex = f[src, self.projField]
+        f_part = getattr(f_part_complex, self.component) # get the real or imag component
+
+        return P*f_part
+
+    def evalDeriv(self, src, mesh, f, v, adjoint=False):
+        """
+        Derivative of projected fields with respect to the inversion model times a vector.
+
+        :param Source src: FDEM source
+        :param Mesh mesh: mesh used
+        :param Fields f: fields object
+        :param numpy.ndarray v: vector to multiply
+        :rtype: numpy.ndarray
+        :return: fields projected to recievers
+        """
+
+        P = self.getP(mesh, self.projGLoc(f))
+
+        if not adjoint:
+            Pv_complex = P * v
+            Pv = getattr(Pv_complex, self.component)
+        elif adjoint:
+            Pv_real = P.T * v
+
+            if self.component == 'imag':
+                Pv = 1j*Pv_real
+            elif self.component == 'real':
+                Pv = Pv_real.astype(complex)
+            else:
+                raise NotImplementedError('must be real or imag')
+
+        return Pv
+
+
+class Point_e(BaseRx):
+    """
+    Electric field FDEM receiver
+
+    :param numpy.ndarray locs: receiver locations (ie. :code:`np.r_[x,y,z]`)
+    :param string orientation: receiver orientation 'x', 'y' or 'z'
+    :param string component: real or imaginary component 'real' or 'imag'
+    """
+
+    def __init__(self, locs, orientation=None, component=None):
+        self.projField = 'e'
+        super(Point_e, self).__init__(locs, orientation, component)
+
+
+class Point_b(BaseRx):
+    """
+    Magnetic flux FDEM receiver
+
+    :param numpy.ndarray locs: receiver locations (ie. :code:`np.r_[x,y,z]`)
+    :param string orientation: receiver orientation 'x', 'y' or 'z'
+    :param string component: real or imaginary component 'real' or 'imag'
+    """
+
+    def __init__(self, locs, orientation=None, component=None):
+        self.projField = 'b'
+        super(Point_b, self).__init__(locs, orientation, component)
+
+
+class Point_h(BaseRx):
+    """
+    Magnetic field FDEM receiver
+
+    :param numpy.ndarray locs: receiver locations (ie. :code:`np.r_[x,y,z]`)
+    :param string orientation: receiver orientation 'x', 'y' or 'z'
+    :param string component: real or imaginary component 'real' or 'imag'
+    """
+
+    def __init__(self, locs, orientation=None, component=None):
+        self.projField = 'h'
+        super(Point_h, self).__init__(locs, orientation, component)
+
+
+class Point_j(BaseRx):
+    """
+    Current density FDEM receiver
+
+    :param numpy.ndarray locs: receiver locations (ie. :code:`np.r_[x,y,z]`)
+    :param string orientation: receiver orientation 'x', 'y' or 'z'
+    :param string component: real or imaginary component 'real' or 'imag'
+    """
+
+    def __init__(self, locs, orientation=None, component=None):
+        self.projField = 'j'
+        super(Point_j, self).__init__(locs, orientation, component)

SimPEG/EM/FDEM/SrcFDEM.py

@@ -2,134 +2,366 @@ from SimPEG import Survey, Problem, Utils, np, sp
 from scipy.constants import mu_0
 from SimPEG.EM.Utils import *
 from SimPEG.Utils import Zero
-# from SurveyFDEM import Rx
- 
 
 class BaseSrc(Survey.BaseSrc):
+    """
+    Base source class for FDEM Survey
+    """
+
     freq = None
-    # rxPair = Rx
-    integrate = True
+    integrate = False
+    _ePrimary = None
+    _bPrimary = None
+    _hPrimary = None
+    _jPrimary = None
+
+    def __init__(self, rxList, **kwargs):
+        Survey.BaseSrc.__init__(self, rxList, **kwargs)
 
     def eval(self, prob):
-        S_m = self.S_m(prob)
-        S_e = self.S_e(prob)
-        return S_m, S_e
+        """
+        - :math:`s_m` : magnetic source term
+        - :math:`s_e` : electric source term
 
-    def evalDeriv(self, prob, v, adjoint=False):
-        return lambda v: self.S_mDeriv(prob,v,adjoint), lambda v: self.S_eDeriv(prob,v,adjoint)
+        :param Problem prob: FDEM Problem
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: tuple with magnetic source term and electric source term
+        """
+        s_m = self.s_m(prob)
+        s_e = self.s_e(prob)
+        return s_m, s_e
+
+    def evalDeriv(self, prob, v=None, adjoint=False):
+        """
+        Derivatives of the source terms with respect to the inversion model
+        - :code:`s_mDeriv` : derivative of the magnetic source term
+        - :code:`s_eDeriv` : derivative of the electric source term
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: tuple with magnetic source term and electric source term derivatives times a vector
+        """
+        if v is not None:
+            return self.s_mDeriv(prob, v, adjoint), self.s_eDeriv(prob, v, adjoint)
+        else:
+            return lambda v: self.s_mDeriv(prob, v, adjoint), lambda v: self.s_eDeriv(prob, v, adjoint)
 
     def bPrimary(self, prob):
+        """
+        Primary magnetic flux density
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic flux density
+        """
+        if self._bPrimary is None:
+            return Zero()
+        return self._bPrimary
+
+    def bPrimaryDeriv(self, prob, v, adjoint=False):
+        """
+        Derivative of the primary magnetic flux density
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: primary magnetic flux density
+        """
         return Zero()
 
     def hPrimary(self, prob):
+        """
+        Primary magnetic field
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+        if self._hPrimary is None:
+            return Zero()
+        return self._hPrimary
+
+    def hPrimaryDeriv(self, prob, v, adjoint=False):
+        """
+        Derivative of the primary magnetic field
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: primary magnetic flux density
+        """
         return Zero()
 
     def ePrimary(self, prob):
+        """
+        Primary electric field
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: primary electric field
+        """
+        if self._ePrimary is None:
+            return Zero()
+        return self._ePrimary
+
+    def ePrimaryDeriv(self, prob, v, adjoint=False):
+        """
+        Derivative of the primary electric field
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: primary magnetic flux density
+        """
         return Zero()
 
     def jPrimary(self, prob):
+        """
+        Primary current density
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: primary current density
+        """
+        if self._jPrimary is None:
+            return Zero()
+        return self._jPrimary
+
+    def jPrimaryDeriv(self, prob, v, adjoint=False):
+        """
+        Derivative of the primary current density
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: primary magnetic flux density
+        """
         return Zero()
 
-    def S_m(self, prob):
+    def s_m(self, prob):
+        """
+        Magnetic source term
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: magnetic source term on mesh
+        """
         return Zero()
 
-    def S_e(self, prob):
+    def s_e(self, prob):
+        """
+        Electric source term
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: electric source term on mesh
+        """
         return Zero()
 
-    def S_mDeriv(self, prob, v, adjoint = False):
+    def s_mDeriv(self, prob, v, adjoint = False):
+        """
+        Derivative of magnetic source term with respect to the inversion model
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of magnetic source term derivative with a vector
+        """
+
         return Zero()
 
-    def S_eDeriv(self, prob, v, adjoint = False):
+    def s_eDeriv(self, prob, v, adjoint = False):
+        """
+        Derivative of electric source term with respect to the inversion model
+
+        :param Problem prob: FDEM Problem
+        :param numpy.ndarray v: vector to take product with
+        :param bool adjoint: adjoint?
+        :rtype: numpy.ndarray
+        :return: product of electric source term derivative with a vector
+        """
         return Zero()
 
 
 class RawVec_e(BaseSrc):
     """
-        RawVec electric source. It is defined by the user provided vector S_e
+    RawVec electric source. It is defined by the user provided vector s_e
 
-        :param numpy.array S_e: electric source term
-        :param float freq: frequency
-        :param rxList: receiver list
+    :param list rxList: receiver list
+    :param float freq: frequency
+    :param numpy.array s_e: electric source term
+    :param bool integrate: Integrate the source term (multiply by Me) [False]
     """
 
-    def __init__(self, rxList, freq, S_e): #, ePrimary=None, bPrimary=None, hPrimary=None, jPrimary=None):
-        self._S_e = np.array(S_e,dtype=complex)
+    def __init__(self, rxList, freq, s_e, **kwargs):
+        self._s_e = np.array(s_e, dtype=complex)
         self.freq = float(freq)
-        BaseSrc.__init__(self, rxList)
 
-    def S_e(self, prob):
-        return self._S_e
+        BaseSrc.__init__(self, rxList, **kwargs)
+
+    def s_e(self, prob):
+        """
+        Electric source term
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: electric source term on mesh
+        """
+        if prob._formulation is 'EB' and self.integrate is True:
+            return prob.Me * self._s_e
+        return self._s_e
 
 
 class RawVec_m(BaseSrc):
     """
-        RawVec magnetic source. It is defined by the user provided vector S_m
+    RawVec magnetic source. It is defined by the user provided vector s_m
 
-        :param numpy.array S_m: magnetic source term
-        :param float freq: frequency
-        :param rxList: receiver list
+    :param float freq: frequency
+    :param rxList: receiver list
+    :param numpy.array s_m: magnetic source term
+    :param bool integrate: Integrate the source term (multiply by Me) [False]
     """
 
-    def __init__(self, rxList, freq, S_m, integrate = True):  #ePrimary=Zero(), bPrimary=Zero(), hPrimary=Zero(), jPrimary=Zero()):
-        self._S_m = np.array(S_m,dtype=complex)
+    def __init__(self, rxList, freq, s_m, **kwargs):  #ePrimary=Zero(), bPrimary=Zero(), hPrimary=Zero(), jPrimary=Zero()):
+        self._s_m = np.array(s_m, dtype=complex)
         self.freq = float(freq)
-        self.integrate = integrate
 
-        BaseSrc.__init__(self, rxList)
+        BaseSrc.__init__(self, rxList, **kwargs)
 
-    def S_m(self, prob):
-        return self._S_m
+    def s_m(self, prob):
+        """
+        Magnetic source term
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: magnetic source term on mesh
+        """
+        if prob._formulation is 'HJ' and self.integrate is True:
+            return prob.Me * self._s_m
+        return self._s_m
 
 
 class RawVec(BaseSrc):
     """
-        RawVec source. It is defined by the user provided vectors S_m, S_e
+    RawVec source. It is defined by the user provided vectors s_m, s_e
 
-        :param numpy.array S_m: magnetic source term
-        :param numpy.array S_e: electric source term
-        :param float freq: frequency
-        :param rxList: receiver list
+    :param rxList: receiver list
+    :param float freq: frequency
+    :param numpy.array s_m: magnetic source term
+    :param numpy.array s_e: electric source term
+    :param bool integrate: Integrate the source term (multiply by Me) [False]
     """
-    def __init__(self, rxList, freq, S_m, S_e, integrate = True):
-        self._S_m = np.array(S_m,dtype=complex)
-        self._S_e = np.array(S_e,dtype=complex)
+    def __init__(self, rxList, freq, s_m, s_e, **kwargs):
+        self._s_m = np.array(s_m, dtype=complex)
+        self._s_e = np.array(s_e, dtype=complex)
         self.freq = float(freq)
-        self.integrate = integrate
-        BaseSrc.__init__(self, rxList)
+        BaseSrc.__init__(self, rxList, **kwargs)
 
-    def S_m(self, prob):
-        if prob._eqLocs is 'EF' and self.integrate is True:
-            return prob.Me * self._S_m
-        return self._S_m
+    def s_m(self, prob):
+        """
+        Magnetic source term
 
-    def S_e(self, prob):
-        if prob._eqLocs is 'FE' and self.integrate is True:
-            return prob.Me * self._S_e
-        return self._S_e
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: magnetic source term on mesh
+        """
+        if prob._formulation is 'HJ' and self.integrate is True:
+            return prob.Me * self._s_m
+        return self._s_m
+
+    def s_e(self, prob):
+        """
+        Electric source term
+
+        :param Problem prob: FDEM Problem
+        :rtype: numpy.ndarray
+        :return: electric source term on mesh
+        """
+        if prob._formulation is 'EB' and self.integrate is True:
+            return prob.Me * self._s_e
+        return self._s_e
 
 
 class MagDipole(BaseSrc):
+    """
+    Point magnetic dipole source calculated by taking the curl of a magnetic
+    vector potential. By taking the discrete curl, we ensure that the magnetic
+    flux density is divergence free (no magnetic monopoles!).
 
-    #TODO: right now, orientation doesn't actually do anything! The methods in SrcUtils should take care of that
-    def __init__(self, rxList, freq, loc, orientation='Z', moment=1., mu = mu_0):
+    This approach uses a primary-secondary in frequency. Here we show the
+    derivation for E-B formulation noting that similar steps are followed for
+    the H-J formulation.
+
+    .. math::
+        \mathbf{C} \mathbf{e} + i \omega \mathbf{b} = \mathbf{s_m} \\\\
+            {\mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{b} - \mathbf{M_{\sigma}^e} \mathbf{e} = \mathbf{s_e}}
+
+    We split up the fields and :math:`\mu^{-1}` into primary (:math:`\mathbf{P}`) and secondary (:math:`\mathbf{S}`) components
+
+    - :math:`\mathbf{e} = \mathbf{e^P} + \mathbf{e^S}`
+    - :math:`\mathbf{b} = \mathbf{b^P} + \mathbf{b^S}`
+    - :math:`\\boldsymbol{\mu}^{\mathbf{-1}} = \\boldsymbol{\mu}^{\mathbf{-1}^\mathbf{P}} + \\boldsymbol{\mu}^{\mathbf{-1}^\mathbf{S}}`
+
+    and define a zero-frequency primary problem, noting that the source is
+    generated by a divergence free electric current
+
+    .. math::
+        \mathbf{C} \mathbf{e^P} = \mathbf{s_m^P} = 0 \\\\
+            {\mathbf{C}^T \mathbf{{M_{\mu^{-1}}^f}^P} \mathbf{b^P} - \mathbf{M_{\sigma}^e} \mathbf{e^P} = \mathbf{M^e} \mathbf{s_e^P}}
+
+    Since :math:`\mathbf{e^P}` is curl-free, divergence-free, we assume that there is no constant field background, the :math:`\mathbf{e^P} = 0`, so our primary problem is
+
+    .. math::
+        \mathbf{e^P} =  0 \\\\
+            {\mathbf{C}^T \mathbf{{M_{\mu^{-1}}^f}^P} \mathbf{b^P} = \mathbf{s_e^P}}
+
+    Our secondary problem is then
+
+    .. math::
+        \mathbf{C} \mathbf{e^S} + i \omega \mathbf{b^S} = - i \omega \mathbf{b^P} \\\\
+            {\mathbf{C}^T \mathbf{M_{\mu^{-1}}^f} \mathbf{b^S} - \mathbf{M_{\sigma}^e} \mathbf{e^S} = -\mathbf{C}^T \mathbf{{M_{\mu^{-1}}^f}^S} \mathbf{b^P}}
+
+    :param list rxList: receiver list
+    :param float freq: frequency
+    :param numpy.ndarray loc: source location (ie: :code:`np.r_[xloc,yloc,zloc]`)
+    :param string orientation: 'X', 'Y', 'Z'
+    :param float moment: magnetic dipole moment
+    :param float mu: background magnetic permeability
+    """
+
+    def __init__(self, rxList, freq, loc, orientation='Z', moment=1., mu=mu_0, **kwargs):
         self.freq = float(freq)
         self.loc = loc
         self.orientation = orientation
+        assert orientation in ['X','Y','Z'], "Orientation (right now) doesn't actually do anything! The methods in SrcUtils should take care of this..."
         self.moment = moment
         self.mu = mu
-        self.integrate = False
         BaseSrc.__init__(self, rxList)
 
     def bPrimary(self, prob):
-        eqLocs = prob._eqLocs
+        """
+        The primary magnetic flux density from a magnetic vector potential
 
-        if eqLocs is 'FE':
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+        formulation = prob._formulation
+
+        if formulation is 'EB':
             gridX = prob.mesh.gridEx
             gridY = prob.mesh.gridEy
             gridZ = prob.mesh.gridEz
             C = prob.mesh.edgeCurl
 
-        elif eqLocs is 'EF':
+        elif formulation is 'HJ':
             gridX = prob.mesh.gridFx
             gridY = prob.mesh.gridFy
             gridZ = prob.mesh.gridFz
@@ -152,26 +384,51 @@ class MagDipole(BaseSrc):
         return C*a
 
     def hPrimary(self, prob):
+        """
+        The primary magnetic field from a magnetic vector potential
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         b = self.bPrimary(prob)
-        return h_from_b(prob,b)
+        return 1./self.mu * b
+
+    def s_m(self, prob):
+        """
+        The magnetic source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
 
-    def S_m(self, prob):
         b_p = self.bPrimary(prob)
+        if prob._formulation is 'HJ':
+            b_p = prob.Me * b_p
         return -1j*omega(self.freq)*b_p
 
-    def S_e(self, prob):
+    def s_e(self, prob):
+        """
+        The electric source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+
         if all(np.r_[self.mu] == np.r_[prob.curModel.mu]):
             return Zero()
         else:
-            eqLocs = prob._eqLocs
+            formulation = prob._formulation
 
-            if eqLocs is 'FE':
+            if formulation is 'EB':
                 mui_s = prob.curModel.mui - 1./self.mu
                 MMui_s = prob.mesh.getFaceInnerProduct(mui_s)
                 C = prob.mesh.edgeCurl
-            elif eqLocs is 'EF':
+            elif formulation is 'HJ':
                 mu_s = prob.curModel.mu - self.mu
-                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s,invMat=True)
+                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s, invMat=True)
                 C = prob.mesh.edgeCurl.T
 
             return -C.T * (MMui_s * self.bPrimary(prob))
@@ -179,26 +436,48 @@ class MagDipole(BaseSrc):
 
 class MagDipole_Bfield(BaseSrc):
 
-    #TODO: right now, orientation doesn't actually do anything! The methods in SrcUtils should take care of that
-    #TODO: neither does moment
+    """
+    Point magnetic dipole source calculated with the analytic solution for the
+    fields from a magnetic dipole. No discrete curl is taken, so the magnetic
+    flux density may not be strictly divergence free.
+
+    This approach uses a primary-secondary in frequency in the same fashion as the MagDipole.
+
+    :param list rxList: receiver list
+    :param float freq: frequency
+    :param numpy.ndarray loc: source location (ie: :code:`np.r_[xloc,yloc,zloc]`)
+    :param string orientation: 'X', 'Y', 'Z'
+    :param float moment: magnetic dipole moment
+    :param float mu: background magnetic permeability
+    """
+
     def __init__(self, rxList, freq, loc, orientation='Z', moment=1., mu = mu_0):
         self.freq = float(freq)
         self.loc = loc
+        assert orientation in ['X','Y','Z'], "Orientation (right now) doesn't actually do anything! The methods in SrcUtils should take care of this..."
         self.orientation = orientation
         self.moment = moment
         self.mu = mu
         BaseSrc.__init__(self, rxList)
 
     def bPrimary(self, prob):
-        eqLocs = prob._eqLocs
+        """
+        The primary magnetic flux density from the analytic solution for magnetic fields from a dipole
 
-        if eqLocs is 'FE':
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+
+        formulation = prob._formulation
+
+        if formulation is 'EB':
             gridX = prob.mesh.gridFx
             gridY = prob.mesh.gridFy
             gridZ = prob.mesh.gridFz
             C = prob.mesh.edgeCurl
 
-        elif eqLocs is 'EF':
+        elif formulation is 'HJ':
             gridX = prob.mesh.gridEx
             gridY = prob.mesh.gridEy
             gridZ = prob.mesh.gridEz
@@ -221,37 +500,74 @@ class MagDipole_Bfield(BaseSrc):
         return b
 
     def hPrimary(self, prob):
-        b = self.bPrimary(prob)
-        return h_from_b(prob, b)
+        """
+        The primary magnetic field from a magnetic vector potential
 
-    def S_m(self, prob):
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         b = self.bPrimary(prob)
+        return 1/self.mu * b
+
+    def s_m(self, prob):
+        """
+        The magnetic source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+        b = self.bPrimary(prob)
+        if prob._formulation is 'HJ':
+            b = prob.Me * b
         return -1j*omega(self.freq)*b
 
-    def S_e(self, prob):
+    def s_e(self, prob):
+        """
+        The electric source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         if all(np.r_[self.mu] == np.r_[prob.curModel.mu]):
             return Zero()
         else:
-            eqLocs = prob._eqLocs
+            formulation = prob._formulation
 
-            if eqLocs is 'FE':
+            if formulation is 'EB':
                 mui_s = prob.curModel.mui - 1./self.mu
                 MMui_s = prob.mesh.getFaceInnerProduct(mui_s)
                 C = prob.mesh.edgeCurl
-            elif eqLocs is 'EF':
+            elif formulation is 'HJ':
                 mu_s = prob.curModel.mu - self.mu
-                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s,invMat=True)
+                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s, invMat=True)
                 C = prob.mesh.edgeCurl.T
 
             return -C.T * (MMui_s * self.bPrimary(prob))
 
 
 class CircularLoop(BaseSrc):
+    """
+    Circular loop magnetic source calculated by taking the curl of a magnetic
+    vector potential. By taking the discrete curl, we ensure that the magnetic
+    flux density is divergence free (no magnetic monopoles!).
 
-    #TODO: right now, orientation doesn't actually do anything! The methods in SrcUtils should take care of that
-    def __init__(self, rxList, freq, loc, orientation='Z', radius = 1., mu=mu_0):
+    This approach uses a primary-secondary in frequency in the same fashion as the MagDipole.
+
+    :param list rxList: receiver list
+    :param float freq: frequency
+    :param numpy.ndarray loc: source location (ie: :code:`np.r_[xloc,yloc,zloc]`)
+    :param string orientation: 'X', 'Y', 'Z'
+    :param float moment: magnetic dipole moment
+    :param float mu: background magnetic permeability
+    """
+
+    def __init__(self, rxList, freq, loc, orientation='Z', radius=1., mu=mu_0):
         self.freq = float(freq)
         self.orientation = orientation
+        assert orientation in ['X','Y','Z'], "Orientation (right now) doesn't actually do anything! The methods in SrcUtils should take care of this..."
         self.radius = radius
         self.mu = mu
         self.loc = loc
@@ -259,15 +575,22 @@ class CircularLoop(BaseSrc):
         BaseSrc.__init__(self, rxList)
 
     def bPrimary(self, prob):
-        eqLocs = prob._eqLocs
+        """
+        The primary magnetic flux density from a magnetic vector potential
 
-        if eqLocs is 'FE':
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
+        formulation = prob._formulation
+
+        if formulation is 'EB':
             gridX = prob.mesh.gridEx
             gridY = prob.mesh.gridEy
             gridZ = prob.mesh.gridEz
             C = prob.mesh.edgeCurl
 
-        elif eqLocs is 'EF':
+        elif formulation is 'HJ':
             gridX = prob.mesh.gridFx
             gridY = prob.mesh.gridFy
             gridZ = prob.mesh.gridFz
@@ -277,10 +600,10 @@ class CircularLoop(BaseSrc):
             if not prob.mesh.isSymmetric:
                 # TODO ?
                 raise NotImplementedError('Non-symmetric cyl mesh not implemented yet!')
-            a = MagneticDipoleVectorPotential(self.loc, gridY, 'y', moment=self.radius, mu=self.mu)
+            a = MagneticLoopVectorPotential(self.loc, gridY, 'y', moment=self.radius, mu=self.mu)
 
         else:
-            srcfct = MagneticDipoleVectorPotential
+            srcfct = MagneticLoopVectorPotential
             ax = srcfct(self.loc, gridX, 'x', self.radius, mu=self.mu)
             ay = srcfct(self.loc, gridY, 'y', self.radius, mu=self.mu)
             az = srcfct(self.loc, gridZ, 'z', self.radius, mu=self.mu)
@@ -289,28 +612,205 @@ class CircularLoop(BaseSrc):
         return C*a
 
     def hPrimary(self, prob):
+        """
+        The primary magnetic field from a magnetic vector potential
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         b = self.bPrimary(prob)
         return 1./self.mu*b
 
-    def S_m(self, prob):
+    def s_m(self, prob):
+        """
+        The magnetic source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         b = self.bPrimary(prob)
+        if prob._formulation is 'HJ':
+            b =  prob.Me *  b
         return -1j*omega(self.freq)*b
 
-    def S_e(self, prob):
+    def s_e(self, prob):
+        """
+        The electric source term
+
+        :param Problem prob: FDEM problem
+        :rtype: numpy.ndarray
+        :return: primary magnetic field
+        """
         if all(np.r_[self.mu] == np.r_[prob.curModel.mu]):
             return Zero()
         else:
-            eqLocs = prob._eqLocs
+            formulation = prob._formulation
 
-            if eqLocs is 'FE':
+            if formulation is 'EB':
                 mui_s = prob.curModel.mui - 1./self.mu
                 MMui_s = prob.mesh.getFaceInnerProduct(mui_s)
                 C = prob.mesh.edgeCurl
-            elif eqLocs is 'EF':
+
+
+            elif formulation is 'HJ':
                 mu_s = prob.curModel.mu - self.mu
-                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s,invMat=True)
+                MMui_s = prob.mesh.getEdgeInnerProduct(mu_s, invMat=True)
                 C = prob.mesh.edgeCurl.T
 
             return -C.T * (MMui_s * self.bPrimary(prob))
 
 
+class PrimSecSigma(BaseSrc):
+
+    def __init__(self, rxList, freq, sigBack, ePrimary, **kwargs):
+        self.sigBack = sigBack
+
+        BaseSrc.__init__(self, rxList, freq=freq, _ePrimary=ePrimary, **kwargs)
+
+    def s_e(self, prob):
+        return (prob.MeSigma -  prob.mesh.getEdgeInnerProduct(self.sigBack)) * self.ePrimary(prob)
+
+    def s_eDeriv(self, prob, v, adjoint=False):
+        if adjoint:
+            return prob.MeSigmaDeriv(self.ePrimary(prob)).T * v
+        return prob.MeSigmaDeriv(self.ePrimary(prob)) * v
+
+
+class PrimSecMappedSigma(BaseSrc):
+
+    """
+    Primary-Secondary Source in which a mapping is provided to put the current model
+    onto the primary mesh. This is solved on every model update.
+
+    There are a lot of layers to the derivatives here!
+
+    **Required**
+    :param list rxList: Receiver List
+    :param float freq: frequency
+    :param ProblemFDEM primaryProblem: FDEM primary problem
+    :param SurveyFDEM primarySurvey: FDEM primary survey
+
+    **Optional**
+    :param Mapping map2meshSecondary: mapping current model to act as primary model on the secondary mesh
+
+    """
+
+    def __init__(self, rxList, freq, primaryProblem, primarySurvey, map2meshSecondary = None ,**kwargs):
+
+        self.primaryProblem = primaryProblem
+        self.primarySurvey = primarySurvey
+
+        if self.primaryProblem.ispaired is False:
+            self.primaryProblem.pair(self.primarySurvey)
+
+        self.map2meshSecondary = map2meshSecondary
+
+        BaseSrc.__init__(self, rxList, freq=freq, **kwargs)
+
+    def _ProjPrimary(self, prob):
+        # if getattr(self, '__ProjPrimary', None) is None:
+        return self.primaryProblem.mesh.getInterpolationMatCartMesh(prob.mesh, locType='F', locTypeTo='E')
+        # return self.__ProjPrimary
+
+
+    def _primaryFields(self, prob, fieldType=None):
+
+        # TODO: cache and check if prob.curModel has changed
+        fields = self.primaryProblem.fields(prob.curModel.sigmaModel)
+
+        if fieldType is not None:
+            return fields[:,fieldType]
+        return fields
+
+    def _primaryFieldsDeriv(self, prob, v, adjoint=False, f=None):
+        if adjoint:
+            raise NotImplementedError
+
+        # TODO: this should not be hard-coded for j
+        # jp = self._primaryFields(prob)[:,'j']
+
+        # TODO: pull apart Jvec so that don't have to copy paste this code in
+        # A = self.primaryProblem.getA(self.freq)
+        # Ainv = self.primaryProblem.Solver(A, **self.primaryProblem.solverOpts) # create the concept of Ainv (actually a solve)
+
+        if f is None:
+           f = self._primaryFields(prob.curModel.sigmaModel)
+
+        freq = self.freq
+
+        A = self.primaryProblem.getA(freq)
+        Ainv = self.primaryProblem.Solver(A, **self.primaryProblem.solverOpts) # create the concept of Ainv (actually a solve)
+
+        src = self.primarySurvey.srcList[0]
+        # for src in self.survey.getSrcByFreq(freq):
+        u_src = Utils.mkvc(f[src, self.primaryProblem._solutionType])
+        dA_dm_v = self.primaryProblem.getADeriv(freq, u_src, v)
+        dRHS_dm_v = self.primaryProblem.getRHSDeriv(freq, src, v)
+        du_dm_v = Ainv * ( - dA_dm_v + dRHS_dm_v )
+
+        df_dmFun = getattr(f, '_{0}Deriv'.format('j'), None)
+        df_dm_v = df_dmFun(src, du_dm_v, v, adjoint=False)
+        # Jv[src, rx] = rx.evalDeriv(src, self.mesh, f, df_dm_v)
+        Ainv.clean()
+
+        return df_dm_v
+
+        # return self.primaryProblem.Jvec(prob.curModel, v, f=f)
+
+    def ePrimary(self, prob, f=None):
+        if f is None:
+            f = self._primaryFields(prob)
+
+        ep = self._ProjPrimary(prob) * (
+                self.primaryProblem.MfI * (
+                self.primaryProblem.MfRho * f[:,'j'])
+                )
+
+        return Utils.mkvc(ep)
+
+    def ePrimaryDeriv(self, prob, v, adjoint=False, f=None):
+
+        if adjoint is True:
+            raise NotImplementedError
+
+        if f is None:
+            f = self._primaryFields(prob)
+
+        epDeriv = self._ProjPrimary(prob) * (
+                    self.primaryProblem.MfI * (
+                    (self.primaryProblem.MfRhoDeriv(f[:,'j']) * v)
+                    +
+                    (self.primaryProblem.MfRho * self._primaryFieldsDeriv(prob, v, f=f))
+                    )
+                    )
+
+        return Utils.mkvc(epDeriv)
+
+
+    def s_e(self, prob):
+        sigmaPrimary = self.map2meshSecondary * prob.curModel.sigmaModel
+
+        return Utils.mkvc((prob.MeSigma -  prob.mesh.getEdgeInnerProduct(sigmaPrimary)) * self.ePrimary(prob))
+
+
+    def s_eDeriv(self, prob, v, adjoint=False):
+        if adjoint:
+            raise NotImplementedError
+            return prob.MeSigmaDeriv(self.ePrimary(prob)).T * v
+
+        sigmaPrimary = self.map2meshSecondary * prob.curModel.sigmaModel
+        sigmaPrimaryDeriv = self.map2meshSecondary.deriv(prob.curModel.sigmaModel)
+
+        f = self._primaryFields(prob)
+        ePrimary = self.ePrimary(prob,f=f)
+
+        return (prob.MeSigmaDeriv(ePrimary) * v
+                - prob.mesh.getEdgeInnerProductDeriv(sigmaPrimary)(ePrimary) * sigmaPrimaryDeriv * v
+                + (prob.MeSigma -  prob.mesh.getEdgeInnerProduct(sigmaPrimary)) * self.ePrimaryDeriv(prob, v, None, f=f)
+                )
+
+
+
+

SimPEG/EM/FDEM/SurveyFDEM.py

@@ -1,109 +1,26 @@
 import SimPEG
 from SimPEG.EM.Utils import *
+from SimPEG.EM.Base import BaseEMSurvey
 from scipy.constants import mu_0
 from SimPEG.Utils import Zero, Identity
 import SrcFDEM as Src
+import RxFDEM as Rx
+from SimPEG import sp
 
-
-####################################################
-# Receivers
-####################################################
-
-class Rx(SimPEG.Survey.BaseRx):
-
-    knownRxTypes = {
-                    'exr':['e', 'Ex', 'real'],
-                    'eyr':['e', 'Ey', 'real'],
-                    'ezr':['e', 'Ez', 'real'],
-                    'exi':['e', 'Ex', 'imag'],
-                    'eyi':['e', 'Ey', 'imag'],
-                    'ezi':['e', 'Ez', 'imag'],
-
-                    'bxr':['b', 'Fx', 'real'],
-                    'byr':['b', 'Fy', 'real'],
-                    'bzr':['b', 'Fz', 'real'],
-                    'bxi':['b', 'Fx', 'imag'],
-                    'byi':['b', 'Fy', 'imag'],
-                    'bzi':['b', 'Fz', 'imag'],
-
-                    'jxr':['j', 'Fx', 'real'],
-                    'jyr':['j', 'Fy', 'real'],
-                    'jzr':['j', 'Fz', 'real'],
-                    'jxi':['j', 'Fx', 'imag'],
-                    'jyi':['j', 'Fy', 'imag'],
-                    'jzi':['j', 'Fz', 'imag'],
-
-                    'hxr':['h', 'Ex', 'real'],
-                    'hyr':['h', 'Ey', 'real'],
-                    'hzr':['h', 'Ez', 'real'],
-                    'hxi':['h', 'Ex', 'imag'],
-                    'hyi':['h', 'Ey', 'imag'],
-                    'hzi':['h', 'Ez', 'imag'],
-                   }
-    radius = None
-
-    def __init__(self, locs, rxType):
-        SimPEG.Survey.BaseRx.__init__(self, locs, rxType)
-
-    @property
-    def projField(self):
-        """Field Type projection (e.g. e b ...)"""
-        return self.knownRxTypes[self.rxType][0]
-
-    @property
-    def projGLoc(self):
-        """Grid Location projection (e.g. Ex Fy ...)"""
-        return self.knownRxTypes[self.rxType][1]
-
-    @property
-    def projComp(self):
-        """Component projection (real/imag)"""
-        return self.knownRxTypes[self.rxType][2]
-
-    def projectFields(self, src, mesh, u):
-        P = self.getP(mesh)
-        u_part_complex = u[src, self.projField]
-        # get the real or imag component
-        real_or_imag = self.projComp
-        u_part = getattr(u_part_complex, real_or_imag)
-        return P*u_part
-
-    def projectFieldsDeriv(self, src, mesh, u, v, adjoint=False):
-        P = self.getP(mesh)
-
-        if not adjoint:
-            Pv_complex = P * v
-            real_or_imag = self.projComp
-            Pv = getattr(Pv_complex, real_or_imag)
-        elif adjoint:
-            Pv_real = P.T * v
-
-            real_or_imag = self.projComp
-            if real_or_imag == 'imag':
-                Pv = 1j*Pv_real
-            elif real_or_imag == 'real':
-                Pv = Pv_real.astype(complex)
-            else:
-                raise NotImplementedError('must be real or imag')
-
-        return Pv
-
-
-####################################################
-# Survey
-####################################################
-
-class Survey(SimPEG.Survey.BaseSurvey):
+class Survey(BaseEMSurvey):
     """
-        docstring for SurveyFDEM
+    Frequency domain electromagnetic survey
+
+    :param list srcList: list of FDEM sources used in the survey
     """
 
     srcPair = Src.BaseSrc
+    rxPair = Rx.BaseRx
 
     def __init__(self, srcList, **kwargs):
         # Sort these by frequency
         self.srcList = srcList
-        SimPEG.Survey.BaseSurvey.__init__(self, **kwargs)
+        BaseEMSurvey.__init__(self, srcList, **kwargs)
 
         _freqDict = {}
         for src in srcList:
@@ -126,6 +43,7 @@ class Survey(SimPEG.Survey.BaseSurvey):
 
     @property
     def nSrcByFreq(self):
+        """Number of sources at each frequency"""
         if getattr(self, '_nSrcByFreq', None) is None:
             self._nSrcByFreq = {}
             for freq in self.freqs:
@@ -133,16 +51,12 @@ class Survey(SimPEG.Survey.BaseSurvey):
         return self._nSrcByFreq
 
     def getSrcByFreq(self, freq):
-        """Returns the sources associated with a specific frequency."""
+        """
+        Returns the sources associated with a specific frequency.
+        :param float freq: frequency for which we look up sources
+        :rtype: dictionary
+        :return: sources at the sepcified frequency
+        """
         assert freq in self._freqDict, "The requested frequency is not in this survey."
         return self._freqDict[freq]
 
-    def projectFields(self, u):
-        data = SimPEG.Survey.Data(self)
-        for src in self.srcList:
-            for rx in src.rxList:
-                data[src, rx] = rx.projectFields(src, self.mesh, u)
-        return data
-
-    def projectFieldsDeriv(self, u):
-        raise Exception('Use Sources to project fields deriv.')

SimPEG/EM/FDEM/__init__.py

@@ -1,3 +1,5 @@
-from SurveyFDEM import Rx, Src, Survey
-from FDEM import BaseFDEMProblem, Problem_e, Problem_b, Problem_j, Problem_h
-from FieldsFDEM import *
+from SurveyFDEM import Survey
+import SrcFDEM as Src
+import RxFDEM as Rx
+from ProblemFDEM import Problem3D_e, Problem3D_b, Problem3D_j, Problem3D_h
+from FieldsFDEM import Fields3D_e, Fields3D_b, Fields3D_j, Fields3D_h

SimPEG/EM/Static/DC/BoundaryUtils.py

@@ -0,0 +1,160 @@
+import numpy as np
+
+def getxBCyBC_CC(mesh, alpha, beta, gamma):
+# def getxBCyBC(mesh, alpha, beta, gamma):
+    """
+    This is a subfunction generating mixed-boundary condition:
+
+    .. math::
+
+        \nabla \cdot \vec{j} = -\nabla \cdot \vec{j}_s = q
+
+        \rho \vec{j} = -\nabla \phi \phi
+
+        \alpha \phi + \beta \frac{\partial \phi}{\partial r} = \gamma \ at \ r = \partial \Omega
+
+        xBC = f_1(\alpha, \beta, \gamma)
+        yBC = f(\alpha, \beta, \gamma)
+
+    Computes xBC and yBC for cell-centered discretizations
+    """
+    if mesh.dim == 1: #1D
+        if (len(alpha) != 2 or len(beta) != 2 or len(gamma) != 2):
+            raise Exception("Lenght of list, alpha should be 2")
+        fCCxm,fCCxp = mesh.cellBoundaryInd
+        nBC = fCCxm.sum()+fCCxp.sum()
+        h_xm, h_xp = mesh.gridCC[fCCxm], mesh.gridCC[fCCxp]
+
+        alpha_xm, beta_xm, gamma_xm = alpha[0], beta[0], gamma[0]
+        alpha_xp, beta_xp, gamma_xp = alpha[1], beta[1], gamma[1]
+
+        # h_xm, h_xp = mesh.gridCC[fCCxm], mesh.gridCC[fCCxp]
+        h_xm, h_xp = mesh.hx[0], mesh.hx[-1]
+
+        a_xm = gamma_xm/(0.5*alpha_xm-beta_xm/h_xm)
+        b_xm = (0.5*alpha_xm+beta_xm/h_xm)/(0.5*alpha_xm-beta_xm/h_xm)
+        a_xp = gamma_xp/(0.5*alpha_xp-beta_xp/h_xp)
+        b_xp = (0.5*alpha_xp+beta_xp/h_xp)/(0.5*alpha_xp-beta_xp/h_xp)
+
+        xBC_xm = 0.5*a_xm
+        xBC_xp = 0.5*a_xp/b_xp
+        yBC_xm = 0.5*(1.-b_xm)
+        yBC_xp = 0.5*(1.-1./b_xp)
+
+        xBC = np.r_[xBC_xm, xBC_xp]
+        yBC = np.r_[yBC_xm, yBC_xp]
+
+    elif mesh.dim == 2: #2D
+        if (len(alpha) != 4 or len(beta) != 4 or len(gamma) != 4):
+            raise Exception("Lenght of list, alpha should be 4")
+
+        fxm,fxp,fym,fyp = mesh.faceBoundaryInd
+        nBC = fxm.sum()+fxp.sum()+fxm.sum()+fxp.sum()
+
+        alpha_xm, beta_xm, gamma_xm = alpha[0], beta[0], gamma[0]
+        alpha_xp, beta_xp, gamma_xp = alpha[1], beta[1], gamma[1]
+        alpha_ym, beta_ym, gamma_ym = alpha[2], beta[2], gamma[2]
+        alpha_yp, beta_yp, gamma_yp = alpha[3], beta[3], gamma[3]
+
+        # h_xm, h_xp = mesh.gridCC[fCCxm,0], mesh.gridCC[fCCxp,0]
+        # h_ym, h_yp = mesh.gridCC[fCCym,1], mesh.gridCC[fCCyp,1]
+
+        h_xm, h_xp = mesh.hx[0]*np.ones_like(alpha_xm), mesh.hx[-1]*np.ones_like(alpha_xp)
+        h_ym, h_yp = mesh.hy[0]*np.ones_like(alpha_ym), mesh.hy[-1]*np.ones_like(alpha_yp)
+
+        a_xm = gamma_xm/(0.5*alpha_xm-beta_xm/h_xm)
+        b_xm = (0.5*alpha_xm+beta_xm/h_xm)/(0.5*alpha_xm-beta_xm/h_xm)
+        a_xp = gamma_xp/(0.5*alpha_xp-beta_xp/h_xp)
+        b_xp = (0.5*alpha_xp+beta_xp/h_xp)/(0.5*alpha_xp-beta_xp/h_xp)
+
+        a_ym = gamma_ym/(0.5*alpha_ym-beta_ym/h_ym)
+        b_ym = (0.5*alpha_ym+beta_ym/h_ym)/(0.5*alpha_ym-beta_ym/h_ym)
+        a_yp = gamma_yp/(0.5*alpha_yp-beta_yp/h_yp)
+        b_yp = (0.5*alpha_yp+beta_yp/h_yp)/(0.5*alpha_yp-beta_yp/h_yp)
+
+        xBC_xm = 0.5*a_xm
+        xBC_xp = 0.5*a_xp/b_xp
+        yBC_xm = 0.5*(1.-b_xm)
+        yBC_xp = 0.5*(1.-1./b_xp)
+        xBC_ym = 0.5*a_ym
+        xBC_yp = 0.5*a_yp/b_yp
+        yBC_ym = 0.5*(1.-b_ym)
+        yBC_yp = 0.5*(1.-1./b_yp)
+
+        sortindsfx = np.argsort(np.r_[np.arange(mesh.nFx)[fxm], np.arange(mesh.nFx)[fxp]])
+        sortindsfy = np.argsort(np.r_[np.arange(mesh.nFy)[fym], np.arange(mesh.nFy)[fyp]])
+
+        xBC_x = np.r_[xBC_xm, xBC_xp][sortindsfx]
+        xBC_y = np.r_[xBC_ym, xBC_yp][sortindsfy]
+        yBC_x = np.r_[yBC_xm, yBC_xp][sortindsfx]
+        yBC_y = np.r_[yBC_ym, yBC_yp][sortindsfy]
+
+        xBC = np.r_[xBC_x, xBC_y]
+        yBC = np.r_[yBC_x, yBC_y]
+
+    elif mesh.dim == 3: #3D
+        if (len(alpha) != 6 or len(beta) != 6 or len(gamma) != 6):
+            raise Exception("Lenght of list, alpha should be 6")
+        # fCCxm,fCCxp,fCCym,fCCyp,fCCzm,fCCzp = mesh.cellBoundaryInd
+        fxm,fxp,fym,fyp,fzm,fzp = mesh.faceBoundaryInd
+        nBC = fxm.sum()+fxp.sum()+fxm.sum()+fxp.sum()
+
+        alpha_xm, beta_xm, gamma_xm = alpha[0], beta[0], gamma[0]
+        alpha_xp, beta_xp, gamma_xp = alpha[1], beta[1], gamma[1]
+        alpha_ym, beta_ym, gamma_ym = alpha[2], beta[2], gamma[2]
+        alpha_yp, beta_yp, gamma_yp = alpha[3], beta[3], gamma[3]
+        alpha_zm, beta_zm, gamma_zm = alpha[4], beta[4], gamma[4]
+        alpha_zp, beta_zp, gamma_zp = alpha[5], beta[5], gamma[5]
+
+        # h_xm, h_xp = mesh.gridCC[fCCxm,0], mesh.gridCC[fCCxp,0]
+        # h_ym, h_yp = mesh.gridCC[fCCym,1], mesh.gridCC[fCCyp,1]
+        # h_zm, h_zp = mesh.gridCC[fCCzm,2], mesh.gridCC[fCCzp,2]
+
+        h_xm, h_xp = mesh.hx[0]*np.ones_like(alpha_xm), mesh.hx[-1]*np.ones_like(alpha_xp)
+        h_ym, h_yp = mesh.hy[0]*np.ones_like(alpha_ym), mesh.hy[-1]*np.ones_like(alpha_yp)
+        h_zm, h_zp = mesh.hz[0]*np.ones_like(alpha_zm), mesh.hz[-1]*np.ones_like(alpha_zp)
+
+        a_xm = gamma_xm/(0.5*alpha_xm-beta_xm/h_xm)
+        b_xm = (0.5*alpha_xm+beta_xm/h_xm)/(0.5*alpha_xm-beta_xm/h_xm)
+        a_xp = gamma_xp/(0.5*alpha_xp-beta_xp/h_xp)
+        b_xp = (0.5*alpha_xp+beta_xp/h_xp)/(0.5*alpha_xp-beta_xp/h_xp)
+
+        a_ym = gamma_ym/(0.5*alpha_ym-beta_ym/h_ym)
+        b_ym = (0.5*alpha_ym+beta_ym/h_ym)/(0.5*alpha_ym-beta_ym/h_ym)
+        a_yp = gamma_yp/(0.5*alpha_yp-beta_yp/h_yp)
+        b_yp = (0.5*alpha_yp+beta_yp/h_yp)/(0.5*alpha_yp-beta_yp/h_yp)
+
+        a_zm = gamma_zm/(0.5*alpha_zm-beta_zm/h_zm)
+        b_zm = (0.5*alpha_zm+beta_zm/h_zm)/(0.5*alpha_zm-beta_zm/h_zm)
+        a_zp = gamma_zp/(0.5*alpha_zp-beta_zp/h_zp)
+        b_zp = (0.5*alpha_zp+beta_zp/h_zp)/(0.5*alpha_zp-beta_zp/h_zp)
+
+        xBC_xm = 0.5*a_xm
+        xBC_xp = 0.5*a_xp/b_xp
+        yBC_xm = 0.5*(1.-b_xm)
+        yBC_xp = 0.5*(1.-1./b_xp)
+        xBC_ym = 0.5*a_ym
+        xBC_yp = 0.5*a_yp/b_yp
+        yBC_ym = 0.5*(1.-b_ym)
+        yBC_yp = 0.5*(1.-1./b_yp)
+        xBC_zm = 0.5*a_zm
+        xBC_zp = 0.5*a_zp/b_zp
+        yBC_zm = 0.5*(1.-b_zm)
+        yBC_zp = 0.5*(1.-1./b_zp)
+
+        sortindsfx = np.argsort(np.r_[np.arange(mesh.nFx)[fxm], np.arange(mesh.nFx)[fxp]])
+        sortindsfy = np.argsort(np.r_[np.arange(mesh.nFy)[fym], np.arange(mesh.nFy)[fyp]])
+        sortindsfz = np.argsort(np.r_[np.arange(mesh.nFz)[fzm], np.arange(mesh.nFz)[fzp]])
+
+        xBC_x = np.r_[xBC_xm, xBC_xp][sortindsfx]
+        xBC_y = np.r_[xBC_ym, xBC_yp][sortindsfy]
+        xBC_z = np.r_[xBC_zm, xBC_zp][sortindsfz]
+
+        yBC_x = np.r_[yBC_xm, yBC_xp][sortindsfx]
+        yBC_y = np.r_[yBC_ym, yBC_yp][sortindsfy]
+        yBC_z = np.r_[yBC_zm, yBC_zp][sortindsfz]
+
+        xBC = np.r_[xBC_x, xBC_y, xBC_z]
+        yBC = np.r_[yBC_x, yBC_y, yBC_z]
+
+    return xBC, yBC

SimPEG/EM/Static/DC/FieldsDC.py

@@ -0,0 +1,148 @@
+import SimPEG
+from SimPEG.Utils import Identity, Zero
+import numpy as np
+from scipy.constants import epsilon_0
+
+class Fields(SimPEG.Problem.Fields):
+    knownFields = {}
+    dtype = float
+
+    def _phiDeriv(self, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_phiDeriv_u', None) is None or getattr(self, '_phiDeriv_m', None) is None:
+            raise NotImplementedError ('Getting phiDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._phiDeriv_u(src, v, adjoint=adjoint), self._phiDeriv_m(src, v, adjoint=adjoint)
+
+        return np.array(self._phiDeriv_u(src, du_dm_v, adjoint) + self._phiDeriv_m(src, v, adjoint), dtype = float)
+
+    def _eDeriv(self, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_eDeriv_u', None) is None or getattr(self, '_eDeriv_m', None) is None:
+            raise NotImplementedError ('Getting eDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._eDeriv_u(src, v, adjoint), self._eDeriv_m(src, v, adjoint)
+        return np.array(self._eDeriv_u(src, du_dm_v, adjoint) + self._eDeriv_m(src, v, adjoint), dtype = float)
+
+    def _jDeriv(self, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_jDeriv_u', None) is None or getattr(self, '_jDeriv_m', None) is None:
+            raise NotImplementedError ('Getting jDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._jDeriv_u(src, v, adjoint), self._jDeriv_m(src, v, adjoint)
+        return np.array(self._jDeriv_u(src, du_dm_v, adjoint) + self._jDeriv_m(src, v, adjoint), dtype = float)
+
+
+class Fields_CC(Fields):
+    knownFields = {'phiSolution':'CC'}
+    aliasFields = {
+                    'phi': ['phiSolution','CC','_phi'],
+                    'j' : ['phiSolution','F','_j'],
+                    'e' : ['phiSolution','F','_e'],
+                    'charge' : ['phiSolution','CC','_charge'],
+                  }
+                  # primary - secondary
+                  # CC variables
+
+    def __init__(self, mesh, survey, **kwargs):
+        Fields.__init__(self, mesh, survey, **kwargs)
+        mesh.setCellGradBC("neumann")
+        cellGrad = mesh.cellGrad
+    def startup(self):
+        self.prob = self.survey.prob
+
+    def _GLoc(self, fieldType):
+        if fieldType == 'phi':
+            return 'CC'
+        elif fieldType == 'e' or fieldType == 'j':
+            return 'F'
+        else:
+            raise Exception('Field type must be phi, e, j')
+
+    def _phi(self, phiSolution, srcList):
+        return phiSolution
+
+    def _phiDeriv_u(self, src, v, adjoint = False):
+        return Identity()*v
+
+    def _phiDeriv_m(self, src, v, adjoint = False):
+        return Zero()
+
+    def _j(self, phiSolution, srcList):
+        """
+            .. math::
+                \mathbf{j} = \mathbf{M}^{f \ -1}_{\rho} \mathbf{G} \phi
+        """
+        return self.prob.MfRhoI*self.prob.Grad*phiSolution
+
+    def _e(self, phiSolution, srcList):
+        """
+            In HJ formulation e is not well-defined!!
+            .. math::
+                \vec{e} = -\nabla \phi
+        """
+        return -self.mesh.cellGrad*phiSolution
+
+    def _charge(self, phiSolution, srcList):
+        """
+            .. math::
+                \int \nabla \codt \vec{e} =  \int \frac{\rho_v }{\epsillon_0}
+        """
+        return epsilon_0*self.prob.Vol*(self.mesh.faceDiv*self._e(phiSolution, srcList))
+
+class Fields_N(Fields):
+    knownFields = {'phiSolution':'N'}
+    aliasFields = {
+                    'phi': ['phiSolution','N','_phi'],
+                    'j' : ['phiSolution','E','_j'],
+                    'e' : ['phiSolution','E','_e'],
+                    'charge' : ['phiSolution','N','_charge'],
+                  }
+                  # primary - secondary
+                  # N variables
+
+    def __init__(self, mesh, survey, **kwargs):
+        Fields.__init__(self, mesh, survey, **kwargs)
+
+    def startup(self):
+        self.prob = self.survey.prob
+
+    def _GLoc(self, fieldType):
+        if fieldType == 'phi':
+            return 'N'
+        elif fieldType == 'e' or fieldType == 'j':
+            return 'E'
+        else:
+            raise Exception('Field type must be phi, e, j')
+
+    def _phi(self, phiSolution, srcList):
+        return phiSolution
+
+    def _phiDeriv_u(self, src, v, adjoint = False):
+        return Identity()*v
+
+    def _phiDeriv_m(self, src, v, adjoint = False):
+        return Zero()
+
+    def _j(self, phiSolution, srcList):
+        """
+            In EB formulation j is not well-defined!!
+            .. math::
+                \mathbf{j} = - \mathbf{M}^{e}_{\sigma} \mathbf{G} \phi
+        """
+        return self.prob.MeSigma * self._e(phiSolution, srcList)
+
+    def _e(self, phiSolution, srcList):
+        """
+            In HJ formulation e is not well-defined!!
+            .. math::
+                \vec{e} = -\nabla \phi
+        """
+        return -self.mesh.nodalGrad * phiSolution
+
+    def _charge(self, phiSolution, srcList):
+        """
+            .. math::
+                \int \nabla \codt \vec{e} =  \int \frac{\rho_v }{\epsillon_0}
+        """
+        return - epsilon_0*(self.mesh.nodalGrad.T*self.mesh.getEdgeInnerProduct()*self._e(phiSolution, srcList))

SimPEG/EM/Static/DC/FieldsDC_2D.py

@@ -0,0 +1,146 @@
+import SimPEG
+from SimPEG.Utils import Identity, Zero
+import numpy as np
+
+class Fields_ky(SimPEG.Problem.TimeFields):
+
+    """
+
+    Fancy Field Storage for a 2.5D code.
+
+    u[:,'phi', kyInd] = phi
+    print u[src0,'phi']
+
+    Only one field type is stored for
+    each problem, the rest are computed. The fields obejct acts like an array and is indexed by
+    .. code-block:: python
+        f = problem.fields(m)
+        e = f[srcList,'e']
+        j = f[srcList,'j']
+
+    If accessing all sources for a given field, use the :code:`:`
+    .. code-block:: python
+        f = problem.fields(m)
+        phi = f[:,'phi']
+        e = f[:,'e']
+        b = f[:,'b']
+    The array returned will be size (nE or nF, nSrcs :math:`\\times` nFrequencies)
+    """
+
+    knownFields = {}
+    dtype = float
+
+    def _phiDeriv(self,kyInd, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_phiDeriv_u', None) is None or getattr(self, '_phiDeriv_m', None) is None:
+            raise NotImplementedError ('Getting phiDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._phiDeriv_u(kyInd, src, v, adjoint=adjoint), self._phiDeriv_m(kyInd, src, v, adjoint=adjoint)
+
+        return np.array(self._phiDeriv_u(kyInd, src, du_dm_v, adjoint) + self._phiDeriv_m(kyInd, src, v, adjoint), dtype = float)
+
+    def _eDeriv(self,kyInd, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_eDeriv_u', None) is None or getattr(self, '_eDeriv_m', None) is None:
+            raise NotImplementedError ('Getting eDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._eDeriv_u(kyInd, src, v, adjoint), self._eDeriv_m(kyInd, src, v, adjoint)
+        return np.array(self._eDeriv_u(kyInd, src, du_dm_v, adjoint) + self._eDeriv_m(kyInd, src, v, adjoint), dtype = float)
+
+    def _jDeriv(self,kyInd, src, du_dm_v, v, adjoint=False):
+        if getattr(self, '_jDeriv_u', None) is None or getattr(self, '_jDeriv_m', None) is None:
+            raise NotImplementedError ('Getting jDerivs from %s is not implemented' %self.knownFields.keys()[0])
+
+        if adjoint:
+            return self._jDeriv_u(kyInd, src, v, adjoint), self._jDeriv_m(kyInd, src, v, adjoint)
+        return np.array(self._jDeriv_u(kyInd, src, du_dm_v, adjoint) + self._jDeriv_m(kyInd, src, v, adjoint), dtype = float)
+
+
+    # def _eDeriv(self, tInd, src, dun_dm_v, v, adjoint=False):
+    #     if adjoint is True:
+    #         return self._eDeriv_u(tInd, src, v, adjoint), self._eDeriv_m(tInd, src, v, adjoint)
+    #     return self._eDeriv_u(tInd, src, dun_dm_v) + self._eDeriv_m(tInd, src, v)
+
+    # def _bDeriv(self, tInd, src, dun_dm_v, v, adjoint=False):
+    #     if adjoint is True:
+    #         return self._bDeriv_u(tInd, src, v, adjoint), self._bDeriv_m(tInd, src, v, adjoint)
+    #     return self._bDeriv_u(tInd, src, dun_dm_v) + self._bDeriv_m(tInd, src, v)
+
+
+class Fields_ky_CC(Fields_ky):
+    knownFields = {'phiSolution':'CC'}
+    aliasFields = {
+                    'phi': ['phiSolution','CC','_phi'],
+                    'j' : ['phiSolution','F','_j'],
+                    'e' : ['phiSolution','F','_e'],
+                  }
+                  # primary - secondary
+                  # CC variables
+
+    def __init__(self, mesh, survey, **kwargs):
+        Fields_ky.__init__(self, mesh, survey, **kwargs)
+
+    def startup(self):
+        self.prob = self.survey.prob
+
+    def _GLoc(self, fieldType):
+        if fieldType == 'phi':
+            return 'CC'
+        elif fieldType == 'e' or fieldType == 'j':
+            return 'F'
+        else:
+            raise Exception('Field type must be phi, e, j')
+
+    def _phi(self, phiSolution, src, kyInd):
+        return phiSolution
+
+    def _phiDeriv_u(self, kyInd, src, v, adjoint = False):
+        return Identity()*v
+
+    def _phiDeriv_m(self, kyInd, src, v, adjoint = False):
+        return Zero()
+
+    def _j(self, phiSolution, srcList):
+        raise NotImplementedError
+
+    def _e(self, phiSolution, srcList):
+        raise NotImplementedError
+
+class Fields_ky_N(Fields_ky):
+    knownFields = {'phiSolution':'N'}
+    aliasFields = {
+                    'phi': ['phiSolution','N','_phi'],
+                    'j' : ['phiSolution','E','_j'],
+                    'e' : ['phiSolution','E','_e'],
+                  }
+                  # primary - secondary
+                  # CC variables
+
+    def __init__(self, mesh, survey, **kwargs):
+        Fields_ky.__init__(self, mesh, survey, **kwargs)
+
+    def startup(self):
+        self.prob = self.survey.prob
+
+    def _GLoc(self, fieldType):
+        if fieldType == 'phi':
+            return 'N'
+        elif fieldType == 'e' or fieldType == 'j':
+            return 'E'
+        else:
+            raise Exception('Field type must be phi, e, j')
+
+    def _phi(self, phiSolution, src, kyInd):
+        return phiSolution
+
+    def _phiDeriv_u(self, kyInd, src, v, adjoint = False):
+        return Identity()*v
+
+    def _phiDeriv_m(self, kyInd, src, v, adjoint = False):
+        return Zero()
+
+    def _j(self, phiSolution, srcList):
+        raise NotImplementedError
+
+    def _e(self, phiSolution, srcList):
+        raise NotImplementedError

SimPEG/EM/Static/DC/ProblemDC.py

@@ -0,0 +1,296 @@
+from SimPEG import Problem, Utils
+from SimPEG.EM.Base import BaseEMProblem
+from SurveyDC import Survey
+from FieldsDC import Fields, Fields_CC, Fields_N
+from SimPEG.Utils import sdiag
+import numpy as np
+from SimPEG.Utils import Zero
+from BoundaryUtils import getxBCyBC_CC
+
+class BaseDCProblem(BaseEMProblem):
+
+    surveyPair = Survey
+    fieldsPair = Fields
+    Ainv = None
+
+    def fields(self, m):
+        self.curModel = m
+
+        if not self.Ainv == None:
+            self.Ainv.clean()
+
+        f = self.fieldsPair(self.mesh, self.survey)
+        A = self.getA()
+        self.Ainv = self.Solver(A, **self.solverOpts)
+        RHS = self.getRHS()
+        u = self.Ainv * RHS
+        Srcs = self.survey.srcList
+        f[Srcs, self._solutionType] = u
+        return f
+
+    def Jvec(self, m, v, f=None):
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        Jv = self.dataPair(self.survey) #same size as the data
+
+        A = self.getA()
+
+        for src in self.survey.srcList:
+            u_src = f[src, self._solutionType] # solution vector
+            dA_dm_v = self.getADeriv(u_src, v)
+            dRHS_dm_v = self.getRHSDeriv(src, v)
+            du_dm_v = self.Ainv * ( - dA_dm_v + dRHS_dm_v )
+
+            for rx in src.rxList:
+                df_dmFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                df_dm_v = df_dmFun(src, du_dm_v, v, adjoint=False)
+                Jv[src, rx] = rx.evalDeriv(src, self.mesh, f, df_dm_v)
+        return Utils.mkvc(Jv)
+
+    def Jtvec(self, m, v, f=None):
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv = np.zeros(m.size)
+        AT = self.getA()
+
+
+        for src in self.survey.srcList:
+            u_src = f[src, self._solutionType]
+            for rx in src.rxList:
+                PTv = rx.evalDeriv(src, self.mesh, f, v[src, rx], adjoint=True) # wrt f, need possibility wrt m
+                df_duTFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                df_duT, df_dmT = df_duTFun(src, None, PTv, adjoint=True)
+
+                ATinvdf_duT = self.Ainv * df_duT
+
+                dA_dmT = self.getADeriv(u_src, ATinvdf_duT, adjoint=True)
+                dRHS_dmT = self.getRHSDeriv(src, ATinvdf_duT, adjoint=True)
+                du_dmT = -dA_dmT + dRHS_dmT
+                Jtv += (df_dmT + du_dmT).astype(float)
+
+        return Utils.mkvc(Jtv)
+
+    def getSourceTerm(self):
+        """
+        takes concept of source and turns it into a matrix
+        """
+        """
+        Evaluates the sources, and puts them in matrix form
+
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: q (nC or nN, nSrc)
+        """
+
+        Srcs = self.survey.srcList
+
+        if self._formulation is 'EB':
+            n = self.mesh.nN
+            # return NotImplementedError
+
+        elif self._formulation is 'HJ':
+            n = self.mesh.nC
+
+        q = np.zeros((n, len(Srcs)))
+
+        for i, src in enumerate(Srcs):
+            q[:,i] = src.eval(self)
+        return q
+
+class Problem3D_CC(BaseDCProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'HJ' # CC potentials means J is on faces
+    fieldsPair    = Fields_CC
+
+    def __init__(self, mesh, **kwargs):
+        BaseDCProblem.__init__(self, mesh, **kwargs)
+        self.setBC()
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = D MfRhoI G
+
+        """
+
+        D = self.Div
+        G = self.Grad
+        MfRhoI = self.MfRhoI
+        A = D * MfRhoI * G
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return V.T * A
+        return A
+
+    def getADeriv(self, u, v, adjoint= False):
+
+        D = self.Div
+        G = self.Grad
+        MfRhoIDeriv = self.MfRhoIDeriv
+
+        if adjoint:
+            return(MfRhoIDeriv( G * u ).T) * ( D.T * v)
+
+        return D * (MfRhoIDeriv( G * u ) * v)
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+    def setBC(self):
+        if self.mesh.dim==3:
+            fxm,fxp,fym,fyp,fzm,fzp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+            gBFzm = self.mesh.gridFz[fzm,:]
+            gBFzp = self.mesh.gridFz[fzp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+            temp_zm, temp_zp = np.ones_like(gBFzm[:,2]), np.ones_like(gBFzp[:,2])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+            alpha_zm, alpha_zp = temp_zm*0., temp_zp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+            beta_zm, beta_zp = temp_zm, temp_zp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+            gamma_zm, gamma_zp = temp_zm*0., temp_zp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp, alpha_zm, alpha_zp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp, beta_zm, beta_zp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp, gamma_zm, gamma_zp]
+
+        elif self.mesh.dim==2:
+
+            fxm,fxp,fym,fyp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp]
+
+        x_BC, y_BC = getxBCyBC_CC(self.mesh, alpha, beta, gamma)
+        V = self.Vol
+        self.Div = V * self.mesh.faceDiv
+        P_BC, B = self.mesh.getBCProjWF_simple()
+        M = B*self.mesh.aveCC2F
+        self.Grad = self.Div.T - P_BC*Utils.sdiag(y_BC)*M
+
+
+class Problem3D_N(BaseDCProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'EB' # N potentials means B is on faces
+    fieldsPair    = Fields_N
+
+    def __init__(self, mesh, **kwargs):
+        BaseDCProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = G.T MeSigma G
+
+        """
+
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        A = Grad.T * MeSigma * Grad
+
+        # Handling Null space of A
+        A[0,0] = A[0,0] + 1.
+
+        return A
+
+    def getADeriv(self, u, v, adjoint=False):
+        """
+
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        """
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        if not adjoint:
+            return Grad.T*(self.MeSigmaDeriv(Grad*u)*v)
+        elif adjoint:
+            return self.MeSigmaDeriv(Grad*u).T * (Grad*v)
+
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+
+
+

SimPEG/EM/Static/DC/ProblemDC_2D.py

@@ -0,0 +1,349 @@
+from SimPEG import Problem, Utils
+from SimPEG.EM.Base import BaseEMProblem
+from SurveyDC import Survey, Survey_ky
+from FieldsDC_2D import Fields_ky, Fields_ky_CC, Fields_ky_N
+from SimPEG.Utils import sdiag
+import numpy as np
+from SimPEG.Utils import Zero
+from BoundaryUtils import getxBCyBC_CC
+
+class BaseDCProblem_2D(BaseEMProblem):
+
+    surveyPair = Survey_ky
+    fieldsPair = Fields_ky
+    nky = 15
+    kys = np.logspace(-4, 1, nky)
+    Ainv = [None for i in range(nky)]
+    nT = nky # Only for using TimeFields
+
+    def fields(self, m):
+        self.curModel = m
+
+        if not self.Ainv[0] == None:
+            for i in range(self.nky):
+                self.Ainv[i].clean()
+
+        f = self.fieldsPair(self.mesh, self.survey)
+        Srcs = self.survey.srcList
+        for iky in range(self.nky):
+            ky = self.kys[iky]
+            A = self.getA(ky)
+            self.Ainv[iky] = self.Solver(A, **self.solverOpts)
+            RHS = self.getRHS(ky)
+            u = self.Ainv[iky] * RHS
+            f[Srcs, self._solutionType, iky] = u
+        return f
+
+    def Jvec(self, m, v, f=None):
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        Jv = self.dataPair(self.survey) #same size as the data
+        Jv0 = self.dataPair(self.survey)
+
+        # Assume y=0.
+        # This needs some thoughts to implement in general when src is dipole
+        dky = np.diff(self.kys)
+        dky = np.r_[dky[0], dky]
+        y = 0.
+
+        #TODO: this loop is pretty slow .. (Parellize)
+        for iky in range(self.nky):
+            ky = self.kys[iky]
+            A = self.getA(ky)
+            for src in self.survey.srcList:
+                u_src = f[src, self._solutionType, iky] # solution vector
+                dA_dm_v = self.getADeriv(ky, u_src, v)
+                dRHS_dm_v = self.getRHSDeriv(ky, src, v)
+                du_dm_v = self.Ainv[iky] * ( - dA_dm_v + dRHS_dm_v )
+                for rx in src.rxList:
+                    df_dmFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                    df_dm_v = df_dmFun(iky, src, du_dm_v, v, adjoint=False)
+                    # Trapezoidal intergration
+                    Jv1_temp = 1./np.pi*rx.evalDeriv(ky, src, self.mesh, f, df_dm_v)
+                    if iky==0:
+                        #First assigment
+                        Jv[src, rx] = Jv1_temp*dky[iky]*np.cos(ky*y)
+                    else:
+                        Jv[src, rx] += Jv1_temp*dky[iky]    /2.*np.cos(ky*y)
+                        Jv[src, rx] += Jv0[src, rx]*dky[iky]/2.*np.cos(ky*y)
+                    Jv0[src, rx] = Jv1_temp.copy()
+        return Utils.mkvc(Jv)
+
+    def Jtvec(self, m, v, f=None):
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv = np.zeros(m.size, dtype=float)
+
+        # Assume y=0.
+        # This needs some thoughts to implement in general when src is dipole
+        dky = np.diff(self.kys)
+        dky = np.r_[dky[0], dky]
+        y = 0.
+
+        for src in self.survey.srcList:
+            for rx in src.rxList:
+                Jtv_temp1 = np.zeros(m.size, dtype=float)
+                Jtv_temp0 = np.zeros(m.size, dtype=float)
+                #TODO: this loop is pretty slow .. (Parellize)
+                for iky in range(self.nky):
+                    u_src = f[src, self._solutionType, iky]
+                    ky = self.kys[iky]
+                    AT = self.getA(ky)
+                    PTv = rx.evalDeriv(ky, src, self.mesh, f, v[src, rx], adjoint=True) # wrt f, need possibility wrt m
+                    df_duTFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                    df_duT, df_dmT = df_duTFun(iky, src, None, PTv, adjoint=True)
+
+                    ATinvdf_duT = self.Ainv[iky] * df_duT
+
+                    dA_dmT = self.getADeriv(ky, u_src, ATinvdf_duT, adjoint=True)
+                    dRHS_dmT = self.getRHSDeriv(ky, src, ATinvdf_duT, adjoint=True)
+                    du_dmT = -dA_dmT + dRHS_dmT
+                    Jtv_temp1 = 1./np.pi*(df_dmT + du_dmT).astype(float)
+                    # Trapezoidal intergration
+                    if iky==0:
+                        #First assigment
+                        Jtv += Jtv_temp1*dky[iky]*np.cos(ky*y)
+                    else:
+                        Jtv += Jtv_temp1*dky[iky]/2.*np.cos(ky*y)
+                        Jtv += Jtv_temp0*dky[iky]/2.*np.cos(ky*y)
+                    Jtv_temp0 = Jtv_temp1.copy()
+        return Utils.mkvc(Jtv)
+
+    def getSourceTerm(self, ky):
+        """
+        takes concept of source and turns it into a matrix
+        """
+        """
+        Evaluates the sources, and puts them in matrix form
+
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: q (nC or nN, nSrc)
+        """
+
+        Srcs = self.survey.srcList
+
+        if self._formulation is 'EB':
+            n = self.mesh.nN
+            # return NotImplementedError
+
+        elif self._formulation is 'HJ':
+            n = self.mesh.nC
+
+        q = np.zeros((n, len(Srcs)))
+
+        for i, src in enumerate(Srcs):
+            q[:,i] = src.eval(self)
+        return q
+
+class Problem2D_CC(BaseDCProblem_2D):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'HJ' # CC potentials means J is on faces
+    fieldsPair    = Fields_ky_CC
+
+    def __init__(self, mesh, **kwargs):
+        BaseDCProblem_2D.__init__(self, mesh, **kwargs)
+        self.setBC()
+
+    def getA(self, ky):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = D MfRhoI G
+
+        """
+
+        D = self.Div
+        G = self.Grad
+        vol = self.mesh.vol
+        MfRhoI = self.MfRhoI
+        # Get resistivity rho
+        rho = self.curModel.rho
+        A = D * MfRhoI * G + Utils.sdiag(ky**2*vol/rho)
+        return A
+
+    def getADeriv(self, ky, u, v, adjoint= False):
+
+        D = self.Div
+        G = self.Grad
+        vol = self.mesh.vol
+        MfRhoIDeriv = self.MfRhoIDeriv
+        rho = self.curModel.rho
+        if adjoint:
+            return(MfRhoIDeriv( G * u ).T) * ( D.T * v) + ky**2*Utils.sdiag(u.flatten()*vol*(-1./rho**2))*v
+        return D * ((MfRhoIDeriv( G * u )) * v) + ky**2*Utils.sdiag(u.flatten()*vol*(-1./rho**2))*v
+
+    def getRHS(self, ky):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm(ky)
+        return RHS
+
+    def getRHSDeriv(self, ky, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, ky, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+    def setBC(self):
+        if self.mesh.dim==3:
+            fxm,fxp,fym,fyp,fzm,fzp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+            gBFzm = self.mesh.gridFz[fzm,:]
+            gBFzp = self.mesh.gridFz[fzp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+            temp_zm, temp_zp = np.ones_like(gBFzm[:,2]), np.ones_like(gBFzp[:,2])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+            alpha_zm, alpha_zp = temp_zm*0., temp_zp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+            beta_zm, beta_zp = temp_zm, temp_zp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+            gamma_zm, gamma_zp = temp_zm*0., temp_zp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp, alpha_zm, alpha_zp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp, beta_zm, beta_zp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp, gamma_zm, gamma_zp]
+
+        elif self.mesh.dim==2:
+
+            fxm,fxp,fym,fyp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp]
+
+        x_BC, y_BC = getxBCyBC_CC(self.mesh, alpha, beta, gamma)
+        V = self.Vol
+        self.Div = V * self.mesh.faceDiv
+        P_BC, B = self.mesh.getBCProjWF_simple()
+        M = B*self.mesh.aveCC2F
+        self.Grad = self.Div.T - P_BC*Utils.sdiag(y_BC)*M
+
+class Problem2D_N(BaseDCProblem_2D):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'EB' # CC potentials means J is on faces
+    fieldsPair    = Fields_ky_N
+
+    def __init__(self, mesh, **kwargs):
+        BaseDCProblem_2D.__init__(self, mesh, **kwargs)
+        # self.setBC()
+
+    @property
+    def MnSigma(self):
+        """
+            Node inner product matrix for \\(\\sigma\\). Used in the E-B formulation
+        """
+        # TODO: only works isotropic sigma
+        sigma = self.curModel.sigma
+        vol = self.mesh.vol
+        MnSigma = Utils.sdiag(self.mesh.aveN2CC.T*(Utils.sdiag(vol)*sigma))
+
+        return MnSigma
+
+    def MnSigmaDeriv(self, u):
+        """
+            Derivative of MnSigma with respect to the model
+        """
+        sigma = self.curModel.sigma
+        sigmaderiv = self.curModel.sigmaDeriv
+        vol = self.mesh.vol
+        return Utils.sdiag(u)*self.mesh.aveN2CC.T*Utils.sdiag(vol) * self.curModel.sigmaDeriv
+
+    def getA(self, ky):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = D MfRhoI G
+
+        """
+
+        MeSigma = self.MeSigma
+        MnSigma = self.MnSigma
+        Grad = self.mesh.nodalGrad
+        # Get conductivity sigma
+        sigma = self.curModel.sigma
+        A = Grad.T * MeSigma * Grad + ky**2*MnSigma
+
+        # Handling Null space of A
+        A[0,0] = A[0,0] + 1.
+        return A
+
+    def getADeriv(self, ky, u, v, adjoint= False):
+
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        sigma = self.curModel.sigma
+        vol = self.mesh.vol
+
+        if adjoint:
+            return self.MeSigmaDeriv(Grad*u).T * (Grad*v) + ky**2*self.MnSigmaDeriv(u).T*v
+        return Grad.T*(self.MeSigmaDeriv(Grad*u)*v) + ky**2*self.MnSigmaDeriv(u)*v
+
+    def getRHS(self, ky):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm(ky)
+        return RHS
+
+    def getRHSDeriv(self, ky, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, ky, adjoint=adjoint)
+        # return qDeriv
+        return Zero()

SimPEG/EM/Static/DC/RxDC.py

@@ -0,0 +1,136 @@
+import SimPEG
+import numpy as np
+from SimPEG.Utils import Zero, closestPoints
+
+class BaseRx(SimPEG.Survey.BaseRx):
+    locs = None
+    rxType = None
+
+    knownRxTypes = {
+                    'phi':['phi',None],
+                    'ex':['e','x'],
+                    'ey':['e','y'],
+                    'ez':['e','z'],
+                    'jx':['j','x'],
+                    'jy':['j','y'],
+                    'jz':['j','z'],
+                    }
+
+    def __init__(self, locs, rxType, **kwargs):
+        SimPEG.Survey.BaseRx.__init__(self, locs, rxType, **kwargs)
+
+
+    @property
+    def projField(self):
+        """Field Type projection (e.g. e b ...)"""
+        return self.knownRxTypes[self.rxType][0]
+
+    def projGLoc(self, f):
+        """Grid Location projection (e.g. Ex Fy ...)"""
+        comp = self.knownRxTypes[self.rxType][1]
+        if comp is not None:
+            return f._GLoc(self.rxType) + comp
+        return f._GLoc(self.rxType)
+
+    def eval(self, src, mesh, f):
+        P = self.getP(mesh, self.projGLoc(f))
+        return P*f[src, self.projField]
+
+    def evalDeriv(self, src, mesh, f, v, adjoint=False):
+        P = self.getP(mesh, self.projGLoc(f))
+        if not adjoint:
+            return P*v
+        elif adjoint:
+            return P.T*v
+
+# DC.Rx.Pole(locs)
+class Pole(BaseRx):
+
+    def __init__(self, locs, rxType = 'phi', **kwargs):
+        BaseRx.__init__(self, locs, rxType)
+
+
+# DC.Rx.Dipole(locsM, locsN)
+class Dipole(BaseRx):
+
+    def __init__(self, locsM, locsN, rxType = 'phi', **kwargs):
+        assert locsM.shape == locsN.shape, 'locsM and locsN need to be the same size'
+        locs = [locsM, locsN]
+        # We may not need this ...
+        BaseRx.__init__(self, locs, rxType)
+
+    @property
+    def nD(self):
+        """Number of data in the receiver."""
+        return self.locs[0].shape[0]
+
+        # Not sure why ...
+        # return int(self.locs[0].size / 2)
+
+
+    def getP(self, mesh, Gloc):
+        if mesh in self._Ps:
+            return self._Ps[mesh]
+
+        P0 = mesh.getInterpolationMat(self.locs[0], Gloc)
+        P1 = mesh.getInterpolationMat(self.locs[1], Gloc)
+        P = P0 - P1
+
+        if self.storeProjections:
+            self._Ps[mesh] = P
+
+        return P
+
+
+class Dipole_ky(BaseRx):
+
+    def __init__(self, locsM, locsN, rxType = 'phi', **kwargs):
+        assert locsM.shape == locsN.shape, 'locsM and locsN need to be the same size'
+        locs = [locsM, locsN]
+        # We may not need this ...
+        BaseRx.__init__(self, locs, rxType)
+
+    @property
+    def nD(self):
+        """Number of data in the receiver."""
+        return self.locs[0].shape[0]
+
+        # Not sure why ...
+        # return int(self.locs[0].size / 2)
+
+    def getP(self, mesh, Gloc):
+        if mesh in self._Ps:
+            return self._Ps[mesh]
+
+        P0 = mesh.getInterpolationMat(self.locs[0], Gloc)
+        P1 = mesh.getInterpolationMat(self.locs[1], Gloc)
+        P = P0 - P1
+        if self.storeProjections:
+            self._Ps[mesh] = P
+        return P
+
+    def eval(self, kys, src, mesh, f):
+        P = self.getP(mesh, self.projGLoc(f))
+        Pf = P*f[src, self.projField,:]
+        return self.IntTrapezoidal(kys, Pf, y=0.)
+
+    def evalDeriv(self, ky, src, mesh, f, v, adjoint=False):
+        P = self.getP(mesh, self.projGLoc(f))
+        if not adjoint:
+            return P*v
+        elif adjoint:
+            return P.T*v
+
+    def IntTrapezoidal(self, kys, Pf, y=0.):
+        phi = np.zeros(Pf.shape[0])
+        nky = kys.size
+        dky = np.diff(kys)
+        dky = np.r_[dky[0], dky]
+        phi0 = 1./np.pi*Pf[:,0]
+        for iky in range(nky):
+            phi1 = 1./np.pi*Pf[:,iky]
+            phi += phi1*dky[iky]/2.*np.cos(kys[iky]*y)
+            phi += phi0*dky[iky]/2.*np.cos(kys[iky]*y)
+            phi0 = phi1.copy()
+        return phi
+

SimPEG/EM/Static/DC/SrcDC.py

@@ -0,0 +1,86 @@
+import SimPEG
+# from SimPEG.EM.Base import BaseEMSurvey
+from SimPEG.Utils import Zero, closestPoints, mkvc
+import numpy as np
+
+class BaseSrc(SimPEG.Survey.BaseSrc):
+
+    current = 1.0
+    loc = None
+
+    def __init__(self, rxList, **kwargs):
+        SimPEG.Survey.BaseSrc.__init__(self, rxList, **kwargs)
+
+    def eval(self, prob):
+        raise NotImplementedError
+
+    def evalDeriv(self, prob):
+        return Zero()
+
+
+class Dipole(BaseSrc):
+
+    def __init__(self, rxList, locA, locB, **kwargs):
+        assert locA.shape == locB.shape, 'Shape of locA and locB should be the same'
+        self.loc = [locA, locB]
+        BaseSrc.__init__(self, rxList, **kwargs)
+
+    def eval(self, prob):
+        if prob._formulation == 'HJ':
+            inds = closestPoints(prob.mesh, self.loc, gridLoc='CC')
+            q = np.zeros(prob.mesh.nC)
+            q[inds] = self.current * np.r_[1., -1.]
+        elif prob._formulation == 'EB':
+            qa = prob.mesh.getInterpolationMat(self.loc[0], locType='N').todense()
+            qb = -prob.mesh.getInterpolationMat(self.loc[1], locType='N').todense()
+            q = self.current * mkvc(qa+qb)
+        return q
+
+class Pole(BaseSrc):
+
+    def __init__(self, rxList, loc, **kwargs):
+        BaseSrc.__init__(self, rxList, loc=loc, **kwargs)
+
+    def eval(self, prob):
+        if prob._formulation == 'HJ':
+            inds = closestPoints(prob.mesh, self.loc)
+            q = np.zeros(prob.mesh.nC)
+            q[inds] = self.current * np.r_[1.]
+        elif prob._formulation == 'EB':
+            q = prob.mesh.getInterpolationMat(self.loc, locType='N').todense()
+            q = self.current * mkvc(q)
+        return q
+
+
+# class Dipole_ky(BaseSrc):
+
+#     def __init__(self, rxList, locA, locB, **kwargs):
+#         assert locA.shape == locB.shape, 'Shape of locA and locB should be the same'
+#         self.loc = [locA[[0,2]], locB[[0,2]]]
+#         BaseSrc.__init__(self, rxList, **kwargs)
+
+#     def eval(self, prob):
+#         if prob._formulation == 'HJ':
+#             inds = closestPoints(prob.mesh, self.loc, gridLoc='CC')
+#             q = np.zeros(prob.mesh.nC)
+#             q[inds] = self.current * np.r_[1., -1.]
+#         elif prob._formulation == 'EB':
+#             qa = prob.mesh.getInterpolationMat(self.loc[0], locType='N').todense()
+#             qb = -prob.mesh.getInterpolationMat(self.loc[1], locType='N').todense()
+#             q = self.current * mkvc(qa+qb)
+#         return q
+
+# class Pole_ky(BaseSrc):
+
+#     def __init__(self, rxList, loc, **kwargs):
+#         BaseSrc.__init__(self, rxList, loc=loc, **kwargs)
+
+#     def eval(self, prob):
+#         if prob._formulation == 'HJ':
+#             inds = closestPoints(prob.mesh, self.loc[[0,2]])
+#             q = np.zeros(prob.mesh.nC)
+#             q[inds] = self.current * np.r_[1.]
+#         elif prob._formulation == 'EB':
+#             q = prob.mesh.getInterpolationMat(self.loc[[0,2]], locType='N').todense()
+#             q = self.current * mkvc(q)
+#         return q

SimPEG/EM/Static/DC/SurveyDC.py

@@ -0,0 +1,38 @@
+import SimPEG
+from SimPEG.EM.Base import BaseEMSurvey
+from SimPEG import sp, Survey
+from SimPEG.Utils import Zero, Identity
+from RxDC import BaseRx
+from SrcDC import BaseSrc
+
+class Survey(BaseEMSurvey):
+    rxPair  = BaseRx
+    srcPair = BaseSrc
+
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        BaseEMSurvey.__init__(self, srcList, **kwargs)
+
+class Survey_ky(BaseEMSurvey):
+    rxPair  = BaseRx
+    srcPair = BaseSrc
+
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        BaseEMSurvey.__init__(self, srcList, **kwargs)
+
+    def eval(self, f):
+        """
+        Project fields to receiver locations
+        :param Fields u: fields object
+        :rtype: numpy.ndarray
+        :return: data
+        """
+        data = SimPEG.Survey.Data(self)
+        kys = self.prob.kys
+        for src in self.srcList:
+            for rx in src.rxList:
+                data[src, rx] = rx.eval(kys, src, self.mesh, f)
+        return data
+
+

SimPEG/EM/Static/DC/Utils.py

@@ -0,0 +1,38 @@
+import numpy as np
+
+def WennerSrcList(nElecs, aSpacing, in2D=False, plotIt=False):
+
+    import SimPEG.EM.Static.DC as DC
+
+    elocs = np.arange(0,aSpacing*nElecs,aSpacing)
+    elocs -= (nElecs*aSpacing - aSpacing)/2
+    space = 1
+    WENNER = np.zeros((0,),dtype=int)
+    for ii in range(nElecs):
+        for jj in range(nElecs):
+            test = np.r_[jj,jj+space,jj+space*2,jj+space*3]
+            if np.any(test >= nElecs):
+                break
+            WENNER = np.r_[WENNER, test]
+        space += 1
+    WENNER = WENNER.reshape((-1,4))
+
+
+    if plotIt:
+        for i, s in enumerate('rbkg'):
+            plt.plot(elocs[WENNER[:,i]],s+'.')
+        plt.show()
+
+    # Create sources and receivers
+    i = 0
+    if in2D:
+        getLoc = lambda ii, abmn: np.r_[elocs[WENNER[ii,abmn]],0]
+    else:
+        getLoc = lambda ii, abmn: np.r_[elocs[WENNER[ii,abmn]],0, 0]
+    srcList = []
+    for i in range(WENNER.shape[0]):
+        rx = DC.Rx.Dipole(getLoc(i,1).reshape([1,-1]),getLoc(i,2).reshape([1,-1]))
+        src = DC.Src.Dipole([rx], getLoc(i,0),getLoc(i,3))
+        srcList += [src]
+
+    return srcList

SimPEG/EM/Static/DC/__init__.py

@@ -0,0 +1,8 @@
+from ProblemDC import Problem3D_CC, Problem3D_N
+from ProblemDC_2D import Problem2D_CC, Problem2D_N
+from SurveyDC import Survey, Survey_ky
+import SrcDC as Src #Pole
+import RxDC as Rx
+from FieldsDC import Fields_CC
+from BoundaryUtils import getxBCyBC_CC
+import Utils

SimPEG/EM/Static/IP/ProblemIP.py

@@ -0,0 +1,372 @@
+from SimPEG import Problem, Utils, Maps, Mesh
+from SimPEG.EM.Base import BaseEMProblem
+from SimPEG.EM.Static.DC.FieldsDC import Fields, Fields_CC, Fields_N
+from SimPEG.Utils import sdiag
+import numpy as np
+from SimPEG.Utils import Zero
+from SimPEG.EM.Static.DC import getxBCyBC_CC
+from SurveyIP import Survey
+
+class IPPropMap(Maps.PropMap):
+    """
+        Property Map for IP Problems. The electrical chargeability,
+        (\\(\\eta\\)) is the default inversion property
+    """
+    eta = Maps.Property("Electrical Chargeability", defaultInvProp = True)
+
+class BaseIPProblem(BaseEMProblem):
+
+    surveyPair = Survey
+    fieldsPair = Fields
+    PropMap = IPPropMap
+    Ainv = None
+    sigma = None
+    rho = None
+    f = None
+    Ainv = None
+
+    def fields(self, m):
+        self.curModel = m
+        if self.f is None:
+            self.f = self.fieldsPair(self.mesh, self.survey)
+            if self.Ainv == None:
+                A = self.getA()
+                self.Ainv = self.Solver(A, **self.solverOpts)
+            RHS = self.getRHS()
+            u = self.Ainv * RHS
+            Srcs = self.survey.srcList
+            self.f[Srcs, self._solutionType] = u
+        return self.f
+
+    def Jvec(self, m, v, f=None):
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        Jv = self.dataPair(self.survey) #same size as the data
+
+        A = self.getA()
+
+        for src in self.survey.srcList:
+            u_src = f[src, self._solutionType] # solution vector
+            dA_dm_v = self.getADeriv(u_src, v)
+            dRHS_dm_v = self.getRHSDeriv(src, v)
+            du_dm_v = self.Ainv * ( - dA_dm_v + dRHS_dm_v )
+
+            for rx in src.rxList:
+                df_dmFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                df_dm_v = df_dmFun(src, du_dm_v, v, adjoint=False)
+                Jv[src, rx] = rx.evalDeriv(src, self.mesh, f, df_dm_v)
+        # Conductivity (d u / d log sigma)
+        if self._formulation is 'EB':
+            return -Utils.mkvc(Jv)
+        # Conductivity (d u / d log rho)
+        if self._formulation is 'HJ':
+            return Utils.mkvc(Jv)
+
+    def Jtvec(self, m, v, f=None):
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv = np.zeros(m.size)
+        AT = self.getA()
+
+        for src in self.survey.srcList:
+            u_src = f[src, self._solutionType]
+            for rx in src.rxList:
+                PTv = rx.evalDeriv(src, self.mesh, f, v[src, rx], adjoint=True) # wrt f, need possibility wrt m
+                df_duTFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                df_duT, df_dmT = df_duTFun(src, None, PTv, adjoint=True)
+                ATinvdf_duT = self.Ainv * df_duT
+                dA_dmT = self.getADeriv(u_src, ATinvdf_duT, adjoint=True)
+                dRHS_dmT = self.getRHSDeriv(src, ATinvdf_duT, adjoint=True)
+                du_dmT = -dA_dmT + dRHS_dmT
+                Jtv += (df_dmT + du_dmT).astype(float)
+        # Conductivity ((d u / d log sigma).T)
+        if self._formulation is 'EB':
+            return -Utils.mkvc(Jtv)
+        # Conductivity ((d u / d log rho).T)
+        if self._formulation is 'HJ':
+            return Utils.mkvc(Jtv)
+
+    def getSourceTerm(self):
+        """
+        takes concept of source and turns it into a matrix
+        """
+        """
+        Evaluates the sources, and puts them in matrix form
+
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: q (nC or nN, nSrc)
+        """
+
+        Srcs = self.survey.srcList
+
+        if self._formulation is 'EB':
+            n = self.mesh.nN
+            # return NotImplementedError
+
+        elif self._formulation is 'HJ':
+            n = self.mesh.nC
+
+        q = np.zeros((n, len(Srcs)))
+
+        for i, src in enumerate(Srcs):
+            q[:,i] = src.eval(self)
+        return q
+
+    @property
+    def deleteTheseOnModelUpdate(self):
+        toDelete = []
+        return toDelete
+
+    # assume log rho or log cond
+    @property
+    def MeSigma(self):
+        """
+            Edge inner product matrix for \\(\\sigma\\). Used in the E-B formulation
+        """
+        if getattr(self, '_MeSigma', None) is None:
+            self._MeSigma = self.mesh.getEdgeInnerProduct(self.sigma)
+        return self._MeSigma
+
+    @property
+    def MfRhoI(self):
+        """
+            Inverse of :code:`MfRho`
+        """
+        if getattr(self, '_MfRhoI', None) is None:
+            self._MfRhoI = self.mesh.getFaceInnerProduct(self.rho, invMat=True)
+        return self._MfRhoI
+
+    def MfRhoIDeriv(self,u):
+        """
+            Derivative of :code:`MfRhoI` with respect to the model.
+        """
+
+        dMfRhoI_dI = -self.MfRhoI**2
+        dMf_drho = self.mesh.getFaceInnerProductDeriv(self.rho)(u)
+        drho_dlogrho = Utils.sdiag(self.rho)*self.curModel.etaDeriv
+        return dMfRhoI_dI * ( dMf_drho * ( drho_dlogrho))
+
+    # TODO: This should take a vector
+    def MeSigmaDeriv(self, u):
+        """
+            Derivative of MeSigma with respect to the model
+        """
+        dsigma_dlogsigma = Utils.sdiag(self.sigma)*self.curModel.etaDeriv
+        return self.mesh.getEdgeInnerProductDeriv(self.sigma)(u) * dsigma_dlogsigma
+
+class Problem3D_CC(BaseIPProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'HJ' # CC potentials means J is on faces
+    fieldsPair    = Fields_CC
+
+    def __init__(self, mesh, **kwargs):
+        BaseIPProblem.__init__(self, mesh, **kwargs)
+        self.setBC()
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = D MfRhoI G
+
+        """
+
+        D = self.Div
+        G = self.Grad
+        MfRhoI = self.MfRhoI
+        A = D * MfRhoI * G
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return V.T * A
+        return A
+
+    def getADeriv(self, u, v, adjoint= False):
+
+        D = self.Div
+        G = self.Grad
+        MfRhoIDeriv = self.MfRhoIDeriv
+
+        if adjoint:
+            # if self._makeASymmetric is True:
+            #     v = V * v
+            return(MfRhoIDeriv( G * u ).T) * ( D.T * v)
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return V.T * ( D * ( MfRhoIDeriv( D.T * ( V * u ) ) * v ) )
+        return D * (MfRhoIDeriv( G * u ) * v)
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return self.Vol.T * RHS
+
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+    def setBC(self):
+        if self.mesh.dim==3:
+            fxm,fxp,fym,fyp,fzm,fzp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+            gBFzm = self.mesh.gridFz[fzm,:]
+            gBFzp = self.mesh.gridFz[fzp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+            temp_zm, temp_zp = np.ones_like(gBFzm[:,2]), np.ones_like(gBFzp[:,2])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+            alpha_zm, alpha_zp = temp_zm*0., temp_zp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+            beta_zm, beta_zp = temp_zm, temp_zp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+            gamma_zm, gamma_zp = temp_zm*0., temp_zp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp, alpha_zm, alpha_zp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp, beta_zm, beta_zp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp, gamma_zm, gamma_zp]
+
+        elif self.mesh.dim==2:
+
+            fxm,fxp,fym,fyp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp]
+
+        x_BC, y_BC = getxBCyBC_CC(self.mesh, alpha, beta, gamma)
+        V = self.Vol
+        self.Div = V * self.mesh.faceDiv
+        P_BC, B = self.mesh.getBCProjWF_simple()
+        M = B*self.mesh.aveCC2F
+        self.Grad = self.Div.T - P_BC*Utils.sdiag(y_BC)*M
+
+
+class Problem3D_N(BaseIPProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'EB' # N potentials means B is on faces
+    fieldsPair    = Fields_N
+
+    def __init__(self, mesh, **kwargs):
+        BaseIPProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = G.T MeSigma G
+
+        """
+
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        A = Grad.T * MeSigma * Grad
+
+        # Handling Null space of A
+        A[0,0] = A[0,0] + 1.
+
+        return A
+
+    def getADeriv(self, u, v, adjoint=False):
+        """
+
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        """
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        if not adjoint:
+            return Grad.T*(self.MeSigmaDeriv(Grad*u)*v)
+        elif adjoint:
+            return self.MeSigmaDeriv(Grad*u).T * (Grad*v)
+
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+if __name__ == '__main__':
+
+
+    cs = 12.5
+    hx = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hy = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hz = [(cs,7, -1.3),(cs,20)]
+    mesh = Mesh.TensorMesh([hx, hy, hz],x0="CCN")
+    sigma = np.ones(mesh.nC)
+    prob = BaseIPProblem(mesh, sigma=sigma)
+
+

SimPEG/EM/Static/IP/SurveyIP.py

@@ -0,0 +1,23 @@
+import SimPEG
+from SimPEG.EM.Base import BaseEMSurvey
+from SimPEG import sp, Survey
+from SimPEG.Utils import Zero, Identity
+from SimPEG.EM.Static.DC.SrcDC import BaseSrc
+from SimPEG.EM.Static.DC.RxDC import BaseRx
+
+class Survey(BaseEMSurvey):
+    rxPair  = BaseRx
+    srcPair = BaseSrc
+
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        BaseEMSurvey.__init__(self, srcList, **kwargs)
+
+    def dpred(self, m, f=None):
+        """
+            Predicted data.
+
+            .. math::
+                d_\\text{pred} = Pf(m)
+        """
+        return self.prob.Jvec(m, m, f=f)

SimPEG/EM/Static/IP/__init__.py

@@ -0,0 +1,2 @@
+from ProblemIP import Problem3D_CC, Problem3D_N
+from SurveyIP import Survey

SimPEG/EM/Static/SIP/ProblemSIP.py

@@ -0,0 +1,445 @@
+from SimPEG import Problem, Utils, Maps, Mesh
+from SimPEG.EM.Base import BaseEMProblem
+from SimPEG.EM.Static.DC.FieldsDC import Fields, Fields_CC, Fields_N
+from SimPEG.Utils import sdiag
+import numpy as np
+from SimPEG.Utils import Zero
+from SimPEG.EM.Static.DC import getxBCyBC_CC
+from SurveySIP import Survey, Data
+
+class ColeColePropMap(Maps.PropMap):
+    """
+        Property Map for EM Problems. The electrical conductivity (\\(\\sigma\\)) is the default inversion property, and the default value of the magnetic permeability is that of free space (\\(\\mu = 4\\pi\\times 10^{-7} \\) H/m)
+    """
+
+    eta = Maps.Property("Electrical Conductivity", defaultInvProp=True)
+    tau = Maps.Property("Electrical Conductivity", defaultVal=0.1, propertyLink=('taui', Maps.ReciprocalMap))
+    taui   = Maps.Property("Electrical Conductivity", defaultVal=1., propertyLink=('tau', Maps.ReciprocalMap))
+    c   = Maps.Property("Electrical Conductivity", defaultVal=1.)
+
+
+class BaseSIPProblem(BaseEMProblem):
+
+    surveyPair = Survey
+    fieldsPair = Fields
+    dataPair = Data
+    PropMap = ColeColePropMap
+    Ainv = None
+    sigma = None
+    rho = None
+    f = None
+    Ainv = None
+
+    def DebyeTime(self, t):
+        peta = self.curModel.eta*np.exp(-self.curModel.taui*t)
+        return peta
+
+    def EtaDeriv(self, t, v, adjoint=False):
+        v = np.array(v, dtype=float)
+        if adjoint:
+            return self.curModel.etaDeriv.T * (np.exp(-self.curModel.taui*t)*v)
+        else:
+            return np.exp(-self.curModel.taui*t) * (self.curModel.etaDeriv*v)
+
+
+    def TauiDeriv(self, t, v, adjoint=False):
+        v = np.array(v, dtype=float)
+        if adjoint:
+            return -self.curModel.tauiDeriv.T * (self.curModel.eta*t*np.exp(-self.curModel.taui*t)*v)
+        else:
+            return -self.curModel.eta*t*np.exp(-self.curModel.taui*t) * (self.curModel.tauiDeriv*v)
+
+    def fields(self, m):
+        self.curModel = m
+        if self.f is None:
+            self.f = self.fieldsPair(self.mesh, self.survey)
+            if self.Ainv == None:
+                A = self.getA()
+                self.Ainv = self.Solver(A, **self.solverOpts)
+            RHS = self.getRHS()
+            u = self.Ainv * RHS
+            Srcs = self.survey.srcList
+            self.f[Srcs, self._solutionType] = u
+        return self.f
+
+    def forward(self, m, f=None):
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+        Jv = self.dataPair(self.survey) #same size as the data
+        # A = self.getA()
+        JvAll = []
+        for tind in range(len(self.survey.times)):
+            #Pseudo-chareability
+            t = self.survey.times[tind]
+            v = self.DebyeTime(t)
+            for src in self.survey.srcList:
+                u_src = f[src, self._solutionType] # solution vector
+                dA_dm_v = self.getADeriv(u_src, v)
+                dRHS_dm_v = self.getRHSDeriv(src, v)
+                du_dm_v = self.Ainv * ( - dA_dm_v + dRHS_dm_v )
+                for rx in src.rxList:
+                    timeindex = rx.getTimeP(self.survey.times)
+                    if timeindex[tind]:
+                        df_dmFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                        df_dm_v = df_dmFun(src, du_dm_v, v, adjoint=False)
+                        Jv[src, rx, t] = rx.evalDeriv(src, self.mesh, f, df_dm_v)
+
+        # Conductivity (d u / d log sigma)
+        if self._formulation is 'EB':
+            return -Utils.mkvc(Jv)
+        # Resistivity (d u / d log rho)
+        if self._formulation is 'HJ':
+            return Utils.mkvc(Jv)
+
+    def Jvec(self, m, v, f=None):
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+        Jv = self.dataPair(self.survey) #same size as the data
+        # A = self.getA()
+        JvAll = []
+        #Assume only eta and tau (eta first then tau)
+        # v = [2*Mx1]
+        v = v.reshape((int(v.size/2), 2), order='F')
+
+        for tind in range(len(self.survey.times)):
+            t = self.survey.times[tind]
+            v0 = self.EtaDeriv(t, v[:,0])
+            v1 = self.TauiDeriv(t, v[:,1])
+            for src in self.survey.srcList:
+                u_src = f[src, self._solutionType] # solution vector
+                dA_dm_v0 = self.getADeriv(u_src, v0)
+                dRHS_dm_v0 = self.getRHSDeriv(src, v0)
+                du_dm_v0 = self.Ainv * ( - dA_dm_v0 + dRHS_dm_v0 )
+                dA_dm_v1 = self.getADeriv(u_src, v1)
+                dRHS_dm_v1 = self.getRHSDeriv(src, v1)
+                du_dm_v1 = self.Ainv * ( - dA_dm_v1 + dRHS_dm_v1 )
+                for rx in src.rxList:
+                    timeindex = rx.getTimeP(self.survey.times)
+                    if timeindex[tind]:
+                        df_dmFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                        df_dm_v0 = df_dmFun(src, du_dm_v0, v0, adjoint=False)
+                        df_dm_v1 = df_dmFun(src, du_dm_v1, v1, adjoint=False)
+                        Jv[src, rx, t] = rx.evalDeriv(src, self.mesh, f, df_dm_v0)
+                        Jv[src, rx, t] += rx.evalDeriv(src, self.mesh, f, df_dm_v1)
+        # Conductivity (d u / d log sigma)
+        if self._formulation is 'EB':
+            return -Jv.tovec()
+        # Resistivity (d u / d log rho)
+        if self._formulation is 'HJ':
+            return Jv.tovec()
+
+    def Jtvec(self, m, v, f=None):
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv= np.zeros(m.size)
+        for tind in range(len(self.survey.times)):
+            t = self.survey.times[tind]
+            for src in self.survey.srcList:
+                u_src = f[src, self._solutionType]
+                for rx in src.rxList:
+                    timeindex = rx.getTimeP(self.survey.times)
+                    if timeindex[tind]:
+                        PTv = rx.evalDeriv(src, self.mesh, f, v[src, rx, t], adjoint=True) # wrt f, need possibility wrt m
+                        df_duTFun = getattr(f, '_%sDeriv'%rx.projField, None)
+                        df_duT, df_dmT = df_duTFun(src, None, PTv, adjoint=True)
+                        ATinvdf_duT = self.Ainv * df_duT
+                        dA_dmT = self.getADeriv(u_src, ATinvdf_duT, adjoint=True)
+                        dRHS_dmT = self.getRHSDeriv(src, ATinvdf_duT, adjoint=True)
+                        du_dmT = -dA_dmT + dRHS_dmT
+                        Jtv += np.r_[self.EtaDeriv(self.survey.times[tind], du_dmT, adjoint=True), self.TauiDeriv(self.survey.times[tind], du_dmT, adjoint=True)]
+
+        # Conductivity ((d u / d log sigma).T)
+        if self._formulation is 'EB':
+            return -Jtv
+        # Conductivity ((d u / d log rho).T)
+        if self._formulation is 'HJ':
+            return Jtv
+
+    def getSourceTerm(self):
+        """
+        takes concept of source and turns it into a matrix
+        """
+        """
+        Evaluates the sources, and puts them in matrix form
+
+        :rtype: (numpy.ndarray, numpy.ndarray)
+        :return: q (nC or nN, nSrc)
+        """
+
+        Srcs = self.survey.srcList
+
+        if self._formulation is 'EB':
+            n = self.mesh.nN
+            # return NotImplementedError
+
+        elif self._formulation is 'HJ':
+            n = self.mesh.nC
+
+        q = np.zeros((n, len(Srcs)))
+
+        for i, src in enumerate(Srcs):
+            q[:,i] = src.eval(self)
+        return q
+
+    @property
+    def deleteTheseOnModelUpdate(self):
+        toDelete = []
+        return toDelete
+
+    # assume log rho or log cond
+    @property
+    def MeSigma(self):
+        """
+            Edge inner product matrix for \\(\\sigma\\). Used in the E-B formulation
+        """
+        if getattr(self, '_MeSigma', None) is None:
+            self._MeSigma = self.mesh.getEdgeInnerProduct(self.sigma)
+        return self._MeSigma
+
+    @property
+    def MfRhoI(self):
+        """
+            Inverse of :code:`MfRho`
+        """
+        if getattr(self, '_MfRhoI', None) is None:
+            self._MfRhoI = self.mesh.getFaceInnerProduct(self.rho, invMat=True)
+        return self._MfRhoI
+
+    def MfRhoIDeriv(self,u):
+        """
+            Derivative of :code:`MfRhoI` with respect to the model.
+        """
+
+        dMfRhoI_dI = -self.MfRhoI**2
+        dMf_drho = self.mesh.getFaceInnerProductDeriv(self.rho)(u)
+        drho_dlogrho = Utils.sdiag(self.rho)
+        return dMfRhoI_dI * ( dMf_drho * ( drho_dlogrho))
+
+    # TODO: This should take a vector
+    def MeSigmaDeriv(self, u):
+        """
+            Derivative of MeSigma with respect to the model
+        """
+        dsigma_dlogsigma = Utils.sdiag(self.sigma)
+        return self.mesh.getEdgeInnerProductDeriv(self.sigma)(u) * dsigma_dlogsigma
+
+class Problem3D_CC(BaseSIPProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'HJ' # CC potentials means J is on faces
+    fieldsPair    = Fields_CC
+
+    def __init__(self, mesh, **kwargs):
+        BaseSIPProblem.__init__(self, mesh, **kwargs)
+        self.setBC()
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = D MfRhoI G
+
+        """
+
+        D = self.Div
+        G = self.Grad
+        # TODO: this won't work for full anisotropy
+        MfRhoI = self.MfRhoI
+        A = D * MfRhoI * G
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return V.T * A
+        return A
+
+    def getADeriv(self, u, v, adjoint= False):
+
+        D = self.Div
+        G = self.Grad
+        MfRhoIDeriv = self.MfRhoIDeriv
+
+        if adjoint:
+            # if self._makeASymmetric is True:
+            #     v = V * v
+            return(MfRhoIDeriv( G * u ).T) * ( D.T * v)
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return V.T * ( D * ( MfRhoIDeriv( D.T * ( V * u ) ) * v ) )
+        return D * (MfRhoIDeriv( G * u ) * v)
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+
+        # I think we should deprecate this for DC problem.
+        # if self._makeASymmetric is True:
+        #     return self.Vol.T * RHS
+
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+    def setBC(self):
+        if self.mesh.dim==3:
+            fxm,fxp,fym,fyp,fzm,fzp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+            gBFzm = self.mesh.gridFz[fzm,:]
+            gBFzp = self.mesh.gridFz[fzp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+            temp_zm, temp_zp = np.ones_like(gBFzm[:,2]), np.ones_like(gBFzp[:,2])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+            alpha_zm, alpha_zp = temp_zm*0., temp_zp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+            beta_zm, beta_zp = temp_zm, temp_zp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+            gamma_zm, gamma_zp = temp_zm*0., temp_zp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp, alpha_zm, alpha_zp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp, beta_zm, beta_zp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp, gamma_zm, gamma_zp]
+
+        elif self.mesh.dim==2:
+
+            fxm,fxp,fym,fyp = self.mesh.faceBoundaryInd
+            gBFxm = self.mesh.gridFx[fxm,:]
+            gBFxp = self.mesh.gridFx[fxp,:]
+            gBFym = self.mesh.gridFy[fym,:]
+            gBFyp = self.mesh.gridFy[fyp,:]
+
+            # Setup Mixed B.C (alpha, beta, gamma)
+            temp_xm, temp_xp = np.ones_like(gBFxm[:,0]), np.ones_like(gBFxp[:,0])
+            temp_ym, temp_yp = np.ones_like(gBFym[:,1]), np.ones_like(gBFyp[:,1])
+
+            alpha_xm, alpha_xp = temp_xm*0., temp_xp*0.
+            alpha_ym, alpha_yp = temp_ym*0., temp_yp*0.
+
+            beta_xm, beta_xp = temp_xm, temp_xp
+            beta_ym, beta_yp = temp_ym, temp_yp
+
+            gamma_xm, gamma_xp = temp_xm*0., temp_xp*0.
+            gamma_ym, gamma_yp = temp_ym*0., temp_yp*0.
+
+            alpha = [alpha_xm, alpha_xp, alpha_ym, alpha_yp]
+            beta =  [beta_xm, beta_xp, beta_ym, beta_yp]
+            gamma = [gamma_xm, gamma_xp, gamma_ym, gamma_yp]
+
+        x_BC, y_BC = getxBCyBC_CC(self.mesh, alpha, beta, gamma)
+        V = self.Vol
+        self.Div = V * self.mesh.faceDiv
+        P_BC, B = self.mesh.getBCProjWF_simple()
+        M = B*self.mesh.aveCC2F
+        self.Grad = self.Div.T - P_BC*Utils.sdiag(y_BC)*M
+
+
+class Problem3D_N(BaseSIPProblem):
+
+    _solutionType = 'phiSolution'
+    _formulation  = 'EB' # N potentials means B is on faces
+    fieldsPair    = Fields_N
+
+    def __init__(self, mesh, **kwargs):
+        BaseSIPProblem.__init__(self, mesh, **kwargs)
+
+    def getA(self):
+        """
+
+        Make the A matrix for the cell centered DC resistivity problem
+
+        A = G.T MeSigma G
+
+        """
+
+        # TODO: this won't work for full anisotropy
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        A = Grad.T * MeSigma * Grad
+
+        # Handling Null space of A
+        A[0,0] = A[0,0] + 1.
+
+        return A
+
+    def getADeriv(self, u, v, adjoint=False):
+        """
+
+        Product of the derivative of our system matrix with respect to the model and a vector
+
+        """
+        MeSigma = self.MeSigma
+        Grad = self.mesh.nodalGrad
+        if not adjoint:
+            return Grad.T*(self.MeSigmaDeriv(Grad*u)*v)
+        elif adjoint:
+            return self.MeSigmaDeriv(Grad*u).T * (Grad*v)
+
+
+    def getRHS(self):
+        """
+        RHS for the DC problem
+
+        q
+        """
+
+        RHS = self.getSourceTerm()
+        return RHS
+
+    def getRHSDeriv(self, src, v, adjoint=False):
+        """
+        Derivative of the right hand side with respect to the model
+        """
+        # TODO: add qDeriv for RHS depending on m
+        # qDeriv = src.evalDeriv(self, adjoint=adjoint)
+        # return qDeriv
+        return Zero()
+
+if __name__ == '__main__':
+
+
+    cs = 12.5
+    hx = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hy = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hz = [(cs,7, -1.3),(cs,20)]
+    mesh = Mesh.TensorMesh([hx, hy, hz],x0="CCN")
+    sigma = np.ones(mesh.nC)
+    prob = BaseSIPProblem(mesh, sigma=sigma)
+
+

SimPEG/EM/Static/SIP/Regularization.py

@@ -0,0 +1,204 @@
+from SimPEG import Utils, Maps, Mesh, sp, np
+from SimPEG.Regularization import BaseRegularization, Simple
+
+class MultiRegularization(Simple):
+    """
+    **MultiRegularization Class**
+
+    This is used to regularize the model space
+    having multiple models [m1, m2, m3, ...] ::
+
+        reg = Regularization(mesh)
+
+    """
+    nModels = None # Number of models
+    ratios = None  # Ratio for different models
+    crossgrad = False # Use cross gradient or not
+    betacross = 1.
+    wx = []
+    wy = []
+    wz = []
+
+    def __init__(self, mesh, mapping=None, indActive=None, **kwargs):
+        BaseRegularization.__init__(self, mesh, mapping=mapping, indActive=indActive, **kwargs)
+        if self.nModels == None:
+            raise Exception("Put nModels as a initial input!")
+        if self.ratios == None:
+            self.ratios = [1. for imodel in range(self.nModels)]
+
+    @property
+    def Wsmall(self):
+        """Regularization matrix Wsmall"""
+        if getattr(self,'_Wsmall', None) is None:
+            vecs = []
+            for imodel in range(self.nModels):
+                vecs.append((self.regmesh.vol*self.alpha_s*self.wght*self.ratios[imodel])**0.5)
+            self._Wsmall = Utils.sdiag(np.hstack(vecs))
+        return self._Wsmall
+
+    @property
+    def Wx(self):
+        """Regularization matrix Wx"""
+        if getattr(self, '_Wx', None) is None:
+            mats = []
+            for imodel in range(self.nModels):
+                self.wx.append(Utils.sdiag((self.regmesh.aveCC2Fx * self.regmesh.vol*self.alpha_x*self.ratios[imodel]*(self.regmesh.aveCC2Fx*self.wght))**0.5))
+                mats.append(self.wx[imodel]*self.regmesh.cellDiffxStencil)
+            self._Wx = sp.block_diag(mats)
+        return self._Wx
+
+    @property
+    def Wy(self):
+        """Regularization matrix Wy"""
+        if getattr(self, '_Wy', None) is None:
+            mats = []
+            for imodel in range(self.nModels):
+                self.wy.append(Utils.sdiag((self.regmesh.aveCC2Fy * self.regmesh.vol*self.alpha_y*self.ratios[imodel]*(self.regmesh.aveCC2Fy*self.wght))**0.5))
+                mats.append(self.wy[imodel]*self.regmesh.cellDiffyStencil)
+            self._Wy = sp.block_diag(mats)
+        return self._Wy
+
+    @property
+    def Wz(self):
+        """Regularization matrix Wz"""
+        if getattr(self, '_Wz', None) is None:
+            mats = []
+            for imodel in range(self.nModels):
+                self.wz.append(Utils.sdiag((self.regmesh.aveCC2Fz * self.regmesh.vol*self.alpha_z*self.ratios[imodel]*(self.regmesh.aveCC2Fz*self.wght))**0.5))
+                mats.append(self.wz[imodel]*self.regmesh.cellDiffzStencil)
+            self._Wz = sp.block_diag(mats)
+        return self._Wz
+
+    @property
+    def Wsmooth(self):
+        """Full smoothness regularization matrix W"""
+        if getattr(self, '_Wsmooth', None) is None:
+            wlist = (self.Wx,)
+            if self.regmesh.dim > 1:
+                wlist += (self.Wy,)
+            if self.regmesh.dim > 2:
+                wlist += (self.Wz,)
+            self._Wsmooth = sp.vstack(wlist)
+        return self._Wsmooth
+
+    @property
+    def W(self):
+        """Full regularization matrix W"""
+        if getattr(self, '_W', None) is None:
+            wlist = (self.Wsmall, self.Wsmooth)
+            self._W = sp.vstack(wlist)
+        return self._W
+
+
+    @Utils.timeIt
+    def eval(self, m):
+        return self._evalSmall(m) + self._evalSmooth(m)
+
+    @Utils.timeIt
+    def _evalSmall(self, m):
+        r = self.Wsmall * ( self.mapping * (m - self.mref) )
+        return 0.5 * r.dot(r)
+
+    @Utils.timeIt
+    def _evalSmooth(self, m):
+        if self.mrefInSmooth == True:
+            r = self.Wsmooth * ( self.mapping * (m - self.mref) )
+        elif self.mrefInSmooth == False:
+            r = self.Wsmooth * ( self.mapping * m)
+        return 0.5 * r.dot(r)
+
+    def cross(a,b):
+        ax, ay, az = a[0], a[1], a[2]
+        bx, by, bz = b[0], b[1], b[2]
+        cx = ay*bz - az*by
+        cy = az*bx - ax*bz
+        cz = ax*by - ay*bx
+        return [cx, cy, cz]
+
+     # TODO: Implement Cross Gradients..
+    @Utils.timeIt
+    def _evalCross(self, m):
+        if self.crossgrad == False:
+            return 0.
+        elif self.crossgrad == True:
+            M = (self.mapping * m).reshape((self.regmesh.nC, self.nModels), order="F")
+
+            ax = self.regmesh.aveFx2CC*self.regmesh.wx[0]*M[:,0]
+            ay = self.regmesh.aveFy2CC*self.regmesh.wy[0]*M[:,0]
+            az = self.regmesh.aveFz2CC*self.regmesh.wz[0]*M[:,0]
+            bx = self.regmesh.aveFx2CC*self.regmesh.wx[1]*M[:,1]
+            by = self.regmesh.aveFy2CC*self.regmesh.wy[1]*M[:,1]
+            bz = self.regmesh.aveFz2CC*self.regmesh.wz[1]*M[:,1]
+            #ab
+            out_ab = cross([ax, ay, az], [bx, by, bz])
+            r = np.r_[out_ab[0], out_ab[1], out_ab[2]]*np.sqrt(self.betacross)
+
+            if self.nModels == 3:
+                cx = self.regmesh.aveFx2CC*self.regmesh.wx[1]*M[:,1]
+                cy = self.regmesh.aveFy2CC*self.regmesh.wy[1]*M[:,1]
+                cz = self.regmesh.aveFz2CC*self.regmesh.wz[1]*M[:,1]
+                #ac
+                out_ac = cross([ax, ay, az], [cx, cy, cz])
+                #bc
+                out_bc = cross([bx, by, bz], [cx, cy, cz])
+                r = np.r_[r, np.hstack(out_ac)*np.sqrt(self.betacross), np.hstack(out_bc)*np.sqrt(self.betacross)]
+
+            return 0.5 * r.dot(r)
+
+    @Utils.timeIt
+    def evalDeriv(self, m):
+        """
+        The regularization is:
+
+        .. math::
+
+            R(m) = \\frac{1}{2}\mathbf{(m-m_\\text{ref})^\\top W^\\top W(m-m_\\text{ref})}
+
+        So the derivative is straight forward:
+
+        .. math::
+
+            R(m) = \mathbf{W^\\top W (m-m_\\text{ref})}
+
+        """
+        deriv = self._evalSmallDeriv(m) + self._evalSmoothDeriv(m)
+        if self.crossgrad==True:
+            deriv += self._evalCrossDeriv(m)
+        return deriv
+
+    @Utils.timeIt
+    def _evalCrossDeriv(self,m):
+        r = self.Wsmall * ( self.mapping * (m - self.mref) )
+        return r.T * ( self.Wsmall * self.mapping.deriv(m - self.mref) )
+
+    @Utils.timeIt
+    def eval2Deriv(self, m, v=None):
+        """
+        Second derivative
+
+        :param numpy.array m: geophysical model
+        :param numpy.array v: vector to multiply
+        :rtype: scipy.sparse.csr_matrix or numpy.ndarray
+        :return: WtW or WtW*v
+
+        The regularization is:
+
+        .. math::
+
+            R(m) = \\frac{1}{2}\mathbf{(m-m_\\text{ref})^\\top W^\\top W(m-m_\\text{ref})}
+
+        So the second derivative is straight forward:
+
+        .. math::
+
+            R(m) = \mathbf{W^\\top W}
+
+        """
+        mD = self.mapping.deriv(m - self.mref)
+        if v is None:
+            return mD.T * self.W.T * self.W * mD
+
+        return mD.T * ( self.W.T * ( self.W * ( mD * v) ) )
+
+
+

SimPEG/EM/Static/SIP/RxSIP.py

@@ -0,0 +1,88 @@
+import SimPEG
+import numpy as np
+from SimPEG.Utils import Zero, closestPoints
+
+class BaseRx(SimPEG.Survey.BaseTimeRx):
+    locs = None
+    rxType = None
+
+    knownRxTypes = {
+                    'phi':['phi',None],
+                    'ex':['e','x'],
+                    'ey':['e','y'],
+                    'ez':['e','z'],
+                    'jx':['j','x'],
+                    'jy':['j','y'],
+                    'jz':['j','z'],
+                    }
+
+    def __init__(self, locs, times, rxType, **kwargs):
+        SimPEG.Survey.BaseTimeRx.__init__(self, locs, times, rxType, **kwargs)
+
+    @property
+    def projField(self):
+        """Field Type projection (e.g. e b ...)"""
+        return self.knownRxTypes[self.rxType][0]
+
+    def projGLoc(self, f):
+        """Grid Location projection (e.g. Ex Fy ...)"""
+        comp = self.knownRxTypes[self.rxType][1]
+        if comp is not None:
+            return f._GLoc(self.rxType) + comp
+        return f._GLoc(self.rxType)
+
+    def getTimeP(self, timesall):
+        """
+            Returns the time projection matrix.
+
+            .. note::
+
+                This is not stored in memory, but is created on demand.
+        """
+        time_inds = np.in1d(timesall, self.times)
+        return time_inds
+
+    def evalDeriv(self, src, mesh, f, v, adjoint=False):
+        P = self.getP(mesh, self.projGLoc(f))
+        if not adjoint:
+            return P*v
+        elif adjoint:
+            return P.T*v
+
+
+# DC.Rx.Dipole(locs)
+class Dipole(BaseRx):
+
+    def __init__(self, locsM, locsN, times, rxType = 'phi', **kwargs):
+        assert locsM.shape == locsN.shape, 'locsM and locsN need to be the same size'
+        locs = [locsM, locsN]
+        # We may not need this ...
+        BaseRx.__init__(self, locs, times, rxType)
+
+    @property
+    def nD(self):
+        """Number of data in the receiver."""
+        # return self.locs[0].shape[0] * len(self.times)
+        return self.locs[0].shape[0]
+
+    @property
+    def nRx(self):
+        """Number of data in the receiver."""
+        return self.locs[0].shape[0]
+
+        # Not sure why ...
+        # return int(self.locs[0].size / 2)
+
+
+    def getP(self, mesh, Gloc):
+        if mesh in self._Ps:
+            return self._Ps[mesh]
+
+        P0 = mesh.getInterpolationMat(self.locs[0], Gloc)
+        P1 = mesh.getInterpolationMat(self.locs[1], Gloc)
+        P = P0 - P1
+
+        if self.storeProjections:
+            self._Ps[mesh] = P
+
+        return P

SimPEG/EM/Static/SIP/SrcSIP.py

@@ -0,0 +1,64 @@
+import SimPEG
+# from SimPEG.EM.Base import BaseEMSurvey
+from SimPEG.Utils import Zero, closestPoints, mkvc
+import numpy as np
+
+class BaseSrc(SimPEG.Survey.BaseSrc):
+
+    current = 1.0
+    loc = None
+
+    def __init__(self, rxList, **kwargs):
+        SimPEG.Survey.BaseSrc.__init__(self, rxList, **kwargs)
+
+    def eval(self, prob):
+        raise NotImplementedError
+
+    def evalDeriv(self, prob):
+        return Zero()
+
+    @property
+    def nD(self):
+        """Number of data"""
+        return self.vnD.sum()
+
+    @property
+    def vnD(self):
+        """Vector number of data"""
+        return np.array([rx.nD*len(rx.times) for rx in self.rxList])
+
+
+
+class Dipole(BaseSrc):
+
+    def __init__(self, rxList, locA, locB, **kwargs):
+        assert locA.shape == locB.shape, 'Shape of locA and locB should be the same'
+        self.loc = [locA, locB]
+        BaseSrc.__init__(self, rxList, **kwargs)
+
+    def eval(self, prob):
+        if prob._formulation == 'HJ':
+            inds = closestPoints(prob.mesh, self.loc, gridLoc='CC')
+            q = np.zeros(prob.mesh.nC)
+            q[inds] = self.current * np.r_[1., -1.]
+        elif prob._formulation == 'EB':
+            qa = prob.mesh.getInterpolationMat(self.loc[0], locType='N').todense()
+            qb = -prob.mesh.getInterpolationMat(self.loc[1], locType='N').todense()
+            q = self.current * mkvc(qa+qb)
+        return q
+
+class Pole(BaseSrc):
+
+    def __init__(self, rxList, loc, **kwargs):
+        BaseSrc.__init__(self, rxList, loc=loc, **kwargs)
+
+    def eval(self, prob):
+        if prob._formulation == 'HJ':
+            inds = closestPoints(prob.mesh, self.loc)
+            q = np.zeros(prob.mesh.nC)
+            q[inds] = self.current * np.r_[1.]
+        elif prob._formulation == 'EB':
+            q = prob.mesh.getInterpolationMat(self.loc, locType='N').todense()
+            q = self.current * mkvc(q)
+        return q
+

SimPEG/EM/Static/SIP/SurveySIP.py

@@ -0,0 +1,102 @@
+import SimPEG
+from SimPEG.EM.Base import BaseEMSurvey
+from SimPEG import np, sp, Survey, Utils
+from SimPEG.Utils import Zero, Identity
+from SimPEG.EM.Static.SIP.SrcSIP import BaseSrc
+from SimPEG.EM.Static.SIP.RxSIP import BaseRx
+import uuid
+
+
+class Survey(BaseEMSurvey):
+    rxPair  = BaseRx
+    srcPair = BaseSrc
+    times = None
+
+    def __init__(self, srcList, **kwargs):
+        self.srcList = srcList
+        BaseEMSurvey.__init__(self, srcList, **kwargs)
+        self.getUniqueTimes()
+
+    def getUniqueTimes(self):
+        time_rx = []
+        for src in self.srcList:
+            for rx in src.rxList:
+                time_rx.append(rx.times)
+        self.times = np.unique(np.hstack(time_rx))
+
+    def dpred(self, m, f=None):
+        """
+            Predicted data.
+
+            .. math::
+                d_\\text{pred} = Pf(m)
+        """
+        return self.prob.forward(m, f=f)
+
+
+class Data(SimPEG.Survey.Data):
+    """Fancy data storage by Src and Rx"""
+
+    def __init__(self, survey, v=None):
+        self.uid = str(uuid.uuid4())
+        self.survey = survey
+        self._dataDict = {}
+        for src in self.survey.srcList:
+            self._dataDict[src] = {}
+            for rx in src.rxList:
+                self._dataDict[src][rx] = {}
+
+        if v is not None:
+            self.fromvec(v)
+
+    def _ensureCorrectKey(self, key):
+        if type(key) is tuple:
+            if len(key) is not 3:
+                raise KeyError('Key must be [Src, Rx, tInd]')
+            if key[0] not in self.survey.srcList:
+                raise KeyError('Src Key must be a source in the survey.')
+            if key[1] not in key[0].rxList:
+                raise KeyError('Rx Key must be a receiver for the source.')
+            return key
+        elif isinstance(key, self.survey.srcPair):
+            if key not in self.survey.srcList:
+                raise KeyError('Key must be a source in the survey.')
+            return key, None, None
+        else:
+            raise KeyError('Key must be [Src] or [Src,Rx] or [Src, Rx, tInd]')
+
+    def __setitem__(self, key, value):
+        src, rx, t = self._ensureCorrectKey(key)
+        assert rx is not None, 'set data using [Src, Rx]'
+        assert isinstance(value, np.ndarray), 'value must by ndarray'
+        assert value.size == rx.nD, "value must have the same number of data as the source."
+        self._dataDict[src][rx][t] = Utils.mkvc(value)
+
+    def __getitem__(self, key):
+        src, rx, t = self._ensureCorrectKey(key)
+        if rx is not None:
+            if rx not in self._dataDict[src]:
+                raise Exception('Data for receiver has not yet been set.')
+            return self._dataDict[src][rx][t]
+
+        return np.concatenate([self[src,rx, t] for rx in src.rxList])
+
+    def tovec(self):
+        val = []
+        for src in self.survey.srcList:
+            for rx in src.rxList:
+                for t in rx.times:
+                    val.append(self[src, rx, t])
+        return np.concatenate(val)
+
+
+    def fromvec(self, v):
+        v = Utils.mkvc(v)
+        assert v.size == self.survey.nD, 'v must have the correct number of data.'
+        indBot, indTop = 0, 0
+        for src in self.survey.srcList:
+            for rx in src.rxList:
+                for t in rx.times:
+                    indTop += rx.nRx
+                    self[src, rx, t] = v[indBot:indTop]
+                    indBot += rx.nRx

SimPEG/EM/Static/SIP/__init__.py

@@ -0,0 +1,5 @@
+from ProblemSIP import Problem3D_CC, Problem3D_N
+from SurveySIP import Survey, Data
+import SrcSIP as Src #Pole
+import RxSIP as Rx
+from Regularization import MultiRegularization

SimPEG/EM/Static/Utils/StaticUtils.py

@@ -0,0 +1,317 @@
+from SimPEG import np
+from SimPEG.EM.Static import DC, IP
+
+def plot_pseudoSection(DCsurvey, axs, stype='dpdp', dtype="appc", clim=None):
+    """
+        Read list of 2D tx-rx location and plot a speudo-section of apparent
+        resistivity.
+
+        Assumes flat topo for now...
+
+        Input:
+        :param d2D, z0
+        :switch stype -> Either 'pdp' (pole-dipole) | 'dpdp' (dipole-dipole)
+        :switch dtype=-> Either 'appr' (app. res) | 'appc' (app. con) | 'volt' (potential)
+        Output:
+        :figure scatter plot overlayed on image
+
+        Edited Feb 17th, 2016
+
+        @author: dominiquef
+
+    """
+    from SimPEG import np
+    from scipy.interpolate import griddata
+    import pylab as plt
+
+    # Set depth to 0 for now
+    z0 = 0.
+
+    # Pre-allocate
+    midx = []
+    midz = []
+    rho = []
+    LEG = []
+    count = 0 # Counter for data
+    for ii in range(DCsurvey.nSrc):
+
+        Tx = DCsurvey.srcList[ii].loc
+        Rx = DCsurvey.srcList[ii].rxList[0].locs
+
+        nD = DCsurvey.srcList[ii].rxList[0].nD
+
+        data = DCsurvey.dobs[count:count+nD]
+        count += nD
+
+        # Get distances between each poles A-B-M-N
+        if stype == 'pdp':
+            MA = np.abs(Tx[0] - Rx[0][:,0])
+            NA = np.abs(Tx[0] - Rx[1][:,0])
+            MN = np.abs(Rx[1][:,0] - Rx[0][:,0])
+
+            # Create mid-point location
+            Cmid = Tx[0]
+            Pmid = (Rx[0][:,0] + Rx[1][:,0])/2
+            if DCsurvey.mesh.dim == 2:
+                zsrc = Tx[1]
+            elif DCsurvey.mesh.dim ==3:
+                zsrc = Tx[2]
+
+        elif stype == 'dpdp':
+            MA = np.abs(Tx[0][0] - Rx[0][:,0])
+            MB = np.abs(Tx[1][0] - Rx[0][:,0])
+            NA = np.abs(Tx[0][0] - Rx[1][:,0])
+            NB = np.abs(Tx[1][0] - Rx[1][:,0])
+
+            # Create mid-point location
+            Cmid = (Tx[0][0] + Tx[1][0])/2
+            Pmid = (Rx[0][:,0] + Rx[1][:,0])/2
+            if DCsurvey.mesh.dim == 2:
+                zsrc = (Tx[0][1] + Tx[1][1])/2
+            elif DCsurvey.mesh.dim ==3:
+                zsrc = (Tx[0][2] + Tx[1][2])/2
+
+        # Change output for dtype
+        if dtype == 'volt':
+
+            rho = np.hstack([rho,data])
+
+        else:
+
+            # Compute pant leg of apparent rho
+            if stype == 'pdp':
+
+                leg =  data * 2*np.pi  * MA * ( MA + MN ) / MN
+
+            elif stype == 'dpdp':
+
+                leg = data * 2*np.pi / ( 1/MA - 1/MB + 1/NB - 1/NA )
+                LEG.append(1./(2*np.pi) *( 1/MA - 1/MB + 1/NB - 1/NA ))
+            else:
+                print """dtype must be 'pdp'(pole-dipole) | 'dpdp' (dipole-dipole) """
+                break
+
+
+            if dtype == 'appc':
+
+                leg = np.log10(abs(1./leg))
+                rho = np.hstack([rho,leg])
+
+            elif dtype == 'appr':
+
+                leg = np.log10(abs(leg))
+                rho = np.hstack([rho,leg])
+
+            else:
+                print """dtype must be 'appr' | 'appc' | 'volt' """
+                break
+
+
+        midx = np.hstack([midx, ( Cmid + Pmid )/2 ])
+        if DCsurvey.mesh.dim==3:
+            midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + zsrc ])
+        elif DCsurvey.mesh.dim==2:
+            midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + zsrc ])
+    ax = axs
+
+    # Grid points
+    grid_x, grid_z = np.mgrid[np.min(midx):np.max(midx), np.min(midz):np.max(midz)]
+    grid_rho = griddata(np.c_[midx,midz], rho.T, (grid_x, grid_z), method='linear')
+
+    if clim == None:
+        vmin, vmax = rho.min(), rho.max()
+    else:
+        vmin, vmax = clim[0], clim[1]
+
+    grid_rho = np.ma.masked_where(np.isnan(grid_rho), grid_rho)
+    ph = plt.pcolormesh(grid_x[:,0],grid_z[0,:],grid_rho.T, clim=(vmin, vmax), vmin=vmin, vmax=vmax)
+    cbar = plt.colorbar(format="$10^{%.1f}$",fraction=0.04,orientation="horizontal")
+
+    cmin,cmax = cbar.get_clim()
+    ticks = np.linspace(cmin,cmax,3)
+    cbar.set_ticks(ticks)
+    cbar.ax.tick_params(labelsize=10)
+
+    if dtype == 'appc':
+        cbar.set_label("App.Cond",size=12)
+    elif dtype == 'appr':
+        cbar.set_label("App.Res.",size=12)
+    elif dtype == 'volt':
+        cbar.set_label("Potential (V)",size=12)
+
+    # Plot apparent resistivity
+    ax.scatter(midx,midz,s=10,c=rho.T, vmin =vmin, vmax = vmax, clim=(vmin, vmax))
+
+    #ax.set_xticklabels([])
+    #ax.set_yticklabels([])
+
+    plt.gca().set_aspect('equal', adjustable='box')
+
+
+
+    return ph, LEG
+
+def gen_DCIPsurvey(endl, mesh, stype, a, b, n):
+    """
+        Load in endpoints and survey specifications to generate Tx, Rx location
+        stations.
+
+        Assumes flat topo for now...
+
+        Input:
+        :param endl -> input endpoints [x1, y1, z1, x2, y2, z2]
+        :object mesh -> SimPEG mesh object
+        :switch stype -> "dpdp" (dipole-dipole) | "pdp" (pole-dipole) | 'gradient'
+        : param a, n -> pole seperation, number of rx dipoles per tx
+
+        Output:
+        :param Tx, Rx -> List objects for each tx location
+            Lines: P1x, P1y, P1z, P2x, P2y, P2z
+
+        Created on Wed December 9th, 2015
+
+        @author: dominiquef
+        !! Require clean up to deal with DCsurvey
+    """
+
+    from SimPEG import np
+
+    def xy_2_r(x1,x2,y1,y2):
+        r = np.sqrt( np.sum((x2 - x1)**2 + (y2 - y1)**2) )
+        return r
+
+    ## Evenly distribute electrodes and put on surface
+    # Mesure survey length and direction
+    dl_len = xy_2_r(endl[0,0],endl[1,0],endl[0,1],endl[1,1])
+
+    dl_x = ( endl[1,0] - endl[0,0] ) / dl_len
+    dl_y = ( endl[1,1] - endl[0,1] ) / dl_len
+
+    nstn = np.floor( dl_len / a )
+
+    # Compute discrete pole location along line
+    stn_x = endl[0,0] + np.array(range(int(nstn)))*dl_x*a
+    stn_y = endl[0,1] + np.array(range(int(nstn)))*dl_y*a
+
+    if mesh.dim==2:
+        ztop = mesh.vectorNy[-1]
+        # Create line of P1 locations
+        M = np.c_[stn_x, np.ones(nstn).T*ztop]
+        # Create line of P2 locations
+        N = np.c_[stn_x+a*dl_x, np.ones(nstn).T*ztop]
+
+    elif mesh.dim==3:
+        ztop = mesh.vectorNz[-1]
+        # Create line of P1 locations
+        M = np.c_[stn_x, stn_y, np.ones(nstn).T*ztop]
+        # Create line of P2 locations
+        N = np.c_[stn_x+a*dl_x, stn_y+a*dl_y, np.ones(nstn).T*ztop]
+
+
+    ## Build list of Tx-Rx locations depending on survey type
+    # Dipole-dipole: Moving tx with [a] spacing -> [AB a MN1 a MN2 ... a MNn]
+    # Pole-dipole: Moving pole on one end -> [A a MN1 a MN2 ... MNn a B]
+    SrcList = []
+
+
+    if stype != 'gradient':
+
+        for ii in range(0, int(nstn)-1):
+
+
+            if stype == 'dpdp':
+                tx = np.c_[M[ii,:],N[ii,:]]
+            elif stype == 'pdp':
+                tx = np.c_[M[ii,:],M[ii,:]]
+
+            # Rx.append(np.c_[M[ii+1:indx,:],N[ii+1:indx,:]])
+
+            # Current elctrode seperation
+            AB = xy_2_r(tx[0,1],endl[1,0],tx[1,1],endl[1,1])
+
+            # Number of receivers to fit
+            nstn = np.min([np.floor( (AB - b) / a ) , n])
+
+            # Check if there is enough space, else break the loop
+            if nstn <= 0:
+                continue
+
+            # Compute discrete pole location along line
+            stn_x = N[ii,0] + dl_x*b + np.array(range(int(nstn)))*dl_x*a
+            stn_y = N[ii,1] + dl_y*b + np.array(range(int(nstn)))*dl_y*a
+
+            # Create receiver poles
+
+            if mesh.dim==3:
+                # Create line of P1 locations
+                P1 = np.c_[stn_x, stn_y, np.ones(nstn).T*ztop]
+                # Create line of P2 locations
+                P2 = np.c_[stn_x+a*dl_x, stn_y+a*dl_y, np.ones(nstn).T*ztop]
+                rxClass = DC.Rx.Dipole(P1, P2)
+
+            elif mesh.dim==2:
+                # Create line of P1 locations
+                P1 = np.c_[stn_x, np.ones(nstn).T*ztop]
+                # Create line of P2 locations
+                P2 = np.c_[stn_x+a*dl_x, np.ones(nstn).T*ztop]
+                rxClass = DC.Rx.Dipole_ky(P1, P2)
+
+            if stype == 'dpdp':
+                    srcClass = DC.Src.Dipole([rxClass], M[ii,:],N[ii,:])
+            elif stype == 'pdp':
+                    srcClass = DC.Src.Pole([rxClass], M[ii,:])
+            SrcList.append(srcClass)
+
+    elif stype == 'gradient':
+
+        # Gradient survey only requires Tx at end of line and creates a square
+        # grid of receivers at in the middle at a pre-set minimum distance
+
+        # Get the edge limit of survey area
+        min_x = endl[0,0] + dl_x * b
+        min_y = endl[0,1] + dl_y * b
+
+        max_x = endl[1,0] - dl_x * b
+        max_y = endl[1,1] - dl_y * b
+
+        box_l = np.sqrt( (min_x - max_x)**2 + (min_y - max_y)**2 )
+        box_w = box_l/2.
+
+        nstn = np.floor( box_l / a )
+
+        # Compute discrete pole location along line
+        stn_x = min_x + np.array(range(int(nstn)))*dl_x*a
+        stn_y = min_y + np.array(range(int(nstn)))*dl_y*a
+
+        # Define number of cross lines
+        nlin = int(np.floor( box_w / a ))
+        lind = range(-nlin,nlin+1)
+
+        ngrad = nstn * len(lind)
+
+        rx = np.zeros([ngrad,6])
+        for ii in range( len(lind) ):
+
+            # Move line in perpendicular direction by dipole spacing
+            lxx = stn_x - lind[ii]*a*dl_y
+            lyy = stn_y + lind[ii]*a*dl_x
+
+
+            M = np.c_[ lxx, lyy , np.ones(nstn).T*ztop]
+            N = np.c_[ lxx+a*dl_x, lyy+a*dl_y, np.ones(nstn).T*ztop]
+            rx[(ii*nstn):((ii+1)*nstn),:] = np.c_[M,N]
+
+            if mesh.dim==3:
+                rxClass = DC.Rx.Dipole(rx[:,:3], rx[:,3:])
+            elif mesh.dim==2:
+                M = M[:,[0,2]]
+                N = N[:,[0,2]]
+                rxClass = DC.Rx.Dipole_ky(rx[:,[0,2]], rx[:,[3,5]])
+            srcClass = DC.Src.Dipole([rxClass], M[0,:], N[-1,:])
+        SrcList.append(srcClass)
+    else:
+        print """stype must be either 'pdp', 'dpdp' or 'gradient'. """
+
+
+    return SrcList
+

SimPEG/EM/Static/Utils/__init__.py

@@ -0,0 +1 @@
+from StaticUtils import *

SimPEG/EM/Static/__init__.py

@@ -0,0 +1,3 @@
+import DC
+import IP
+import SIP

SimPEG/EM/TDEM/BaseTDEM.py

@@ -27,16 +27,25 @@ class FieldsTDEM(Problem.TimeFields):
             else:
                 e = np.zeros((nE,nSrc)) # if nSrc == 1 else (nE, nSrc))
             u = np.concatenate((u, b, e))
+
         return Utils.mkvc(u,nSrc)
 
 
 class BaseTDEMProblem(BaseTimeProblem, BaseEMProblem):
-    """docstring for ProblemTDEM1D"""
+    """docstring for BaseTDEMProblem"""
     def __init__(self, mesh, mapping=None, **kwargs):
         BaseTimeProblem.__init__(self, mesh, mapping=mapping, **kwargs)
 
     _FieldsForward_pair = FieldsTDEM  #: used for the forward calculation only
 
+    waveformType = "STEPOFF"
+    current = None
+
+    def currentwaveform(self, wave):
+        self._timeSteps = np.diff(wave[:,0])
+        self.current = wave[:,1]
+        self.waveformType = "GENERAL"
+
     def fields(self, m):
         if self.verbose: print '%s\nCalculating fields(m)\n%s'%('*'*50,'*'*50)
         self.curModel = m
@@ -99,11 +108,11 @@ class BaseTDEMProblem(BaseTimeProblem, BaseEMProblem):
         Ainv.clean()
         return F
 
-    def Jvec(self, m, v, u=None):
+    def Jvec(self, m, v, f=None):
         """
             :param numpy.array m: Conductivity model
             :param numpy.ndarray v: vector (model object)
-            :param simpegEM.TDEM.FieldsTDEM u: Fields resulting from m
+            :param simpegEM.TDEM.FieldsTDEM f: Fields resulting from m
             :rtype: numpy.ndarray
             :return: w (data object)
 
@@ -116,15 +125,15 @@ class BaseTDEMProblem(BaseTimeProblem, BaseEMProblem):
         """
         if self.verbose: print '%s\nCalculating J(v)\n%s'%('*'*50,'*'*50)
         self.curModel = m
-        if u is None:
-            u = self.fields(m)
-        p = self.Gvec(m, v, u)
+        if f is None:
+            f = self.fields(m)
+        p = self.Gvec(m, v, f)
         y = self.solveAh(m, p)
-        Jv = self.survey.projectFieldsDeriv(u, v=y)
+        Jv = self.survey.evalDeriv(f, v=y)
         if self.verbose: print '%s\nDone calculating J(v)\n%s'%('*'*50,'*'*50)
         return - mkvc(Jv)
 
-    def Jtvec(self, m, v, u=None):
+    def Jtvec(self, m, v, f=None):
         """
             :param numpy.array m: Conductivity model
             :param numpy.ndarray,SimPEG.Survey.Data v: vector (data object)
@@ -141,15 +150,15 @@ class BaseTDEMProblem(BaseTimeProblem, BaseEMProblem):
         """
         if self.verbose: print '%s\nCalculating J^T(v)\n%s'%('*'*50,'*'*50)
         self.curModel = m
-        if u is None:
-            u = self.fields(m)
+        if f is None:
+            f = self.fields(m)
 
         if not isinstance(v, self.dataPair):
             v = self.dataPair(self.survey, v)
 
-        p = self.survey.projectFieldsDeriv(u, v=v, adjoint=True)
+        p = self.survey.evalDeriv(f, v=v, adjoint=True)
         y = self.solveAht(m, p)
-        w = self.Gtvec(m, y, u)
+        w = self.Gtvec(m, y, f)
         if self.verbose: print '%s\nDone calculating J^T(v)\n%s'%('*'*50,'*'*50)
         return - mkvc(w)
 

SimPEG/EM/TDEM/SurveyTDEM.py

@@ -51,12 +51,12 @@ class RxTDEM(Survey.BaseTimeRx):
         else:
             return timeMesh.getInterpolationMat(self.times, self.projTLoc)
 
-    def projectFields(self, src, mesh, timeMesh, u):
+    def eval(self, src, mesh, timeMesh, u):
         P = self.getP(mesh, timeMesh)
         u_part = Utils.mkvc(u[src, self.projField, :])
         return P*u_part
 
-    def projectFieldsDeriv(self, src, mesh, timeMesh, u, v, adjoint=False):
+    def evalDeriv(self, src, mesh, timeMesh, u, v, adjoint=False):
         P = self.getP(mesh, timeMesh)
 
         if not adjoint:
@@ -79,12 +79,32 @@ class SrcTDEM(Survey.BaseSrc):
 
 class SrcTDEM_VMD_MVP(SrcTDEM):
 
-    def __init__(self,rxList,loc):
+    def __init__(self,rxList,loc,waveformType="STEPOFF"):
         self.loc = loc
+        self.waveformType = waveformType
         SrcTDEM.__init__(self,rxList)
 
     def getInitialFields(self, mesh):
         """Vertical magnetic dipole, magnetic vector potential"""
+        if self.waveformType == "STEPOFF":
+            print ">> Step waveform: Non-zero initial condition"
+            if mesh._meshType is 'CYL':
+                if mesh.isSymmetric:
+                    MVP = MagneticDipoleVectorPotential(self.loc, mesh, 'Ey')
+                else:
+                    raise NotImplementedError('Non-symmetric cyl mesh not implemented yet!')
+            elif mesh._meshType is 'TENSOR':
+                MVP = MagneticDipoleVectorPotential(self.loc, mesh, ['Ex','Ey','Ez'])
+            else:
+                raise Exception('Unknown mesh for VMD')
+            return {"b": mesh.edgeCurl*MVP}
+        elif self.waveformType == "GENERAL":
+            print ">> General waveform: Zero initial condition"
+            return {"b": np.zeros(mesh.nF)}
+        else:
+            raise NotImplementedError("Only use STEPOFF or GENERAL")
+
+    def getMeS(self, mesh, MfMui):
         if mesh._meshType is 'CYL':
             if mesh.isSymmetric:
                 MVP = MagneticDipoleVectorPotential(self.loc, mesh, 'Ey')
@@ -94,19 +114,37 @@ class SrcTDEM_VMD_MVP(SrcTDEM):
             MVP = MagneticDipoleVectorPotential(self.loc, mesh, ['Ex','Ey','Ez'])
         else:
             raise Exception('Unknown mesh for VMD')
-
-        return {"b": mesh.edgeCurl*MVP}
+        return mesh.edgeCurl.T*MfMui*mesh.edgeCurl*MVP
 
 
 class SrcTDEM_CircularLoop_MVP(SrcTDEM):
-
-    def __init__(self,rxList,loc,radius):
+    def __init__(self,rxList,loc,radius,waveformType="STEPOFF"):
         self.loc = loc
         self.radius = radius
+        self.waveformType = waveformType
         SrcTDEM.__init__(self,rxList)
 
     def getInitialFields(self, mesh):
         """Circular Loop, magnetic vector potential"""
+        if self.waveformType == "STEPOFF":
+            print ">> Step waveform: Non-zero initial condition"
+            if mesh._meshType is 'CYL':
+                if mesh.isSymmetric:
+                    MVP = MagneticLoopVectorPotential(self.loc, mesh, 'Ey', self.radius)
+                else:
+                    raise NotImplementedError('Non-symmetric cyl mesh not implemented yet!')
+            elif mesh._meshType is 'TENSOR':
+                MVP = MagneticLoopVectorPotential(self.loc, mesh, ['Ex','Ey','Ez'], self.radius)
+            else:
+                raise Exception('Unknown mesh for CircularLoop')
+            return {"b": mesh.edgeCurl*MVP}
+        elif self.waveformType == "GENERAL":
+            print ">> General waveform: Zero initial condition"
+            return {"b": np.zeros(mesh.nF)}
+        else:
+            raise NotImplementedError("Only use STEPOFF or GENERAL")
+
+    def getMeS(self, mesh, MfMui):
         if mesh._meshType is 'CYL':
             if mesh.isSymmetric:
                 MVP = MagneticLoopVectorPotential(self.loc, mesh, 'Ey', self.radius)
@@ -116,8 +154,7 @@ class SrcTDEM_CircularLoop_MVP(SrcTDEM):
             MVP = MagneticLoopVectorPotential(self.loc, mesh, ['Ex','Ey','Ez'], self.radius)
         else:
             raise Exception('Unknown mesh for CircularLoop')
-
-        return {"b": mesh.edgeCurl*MVP}
+        return mesh.edgeCurl.T*MfMui*mesh.edgeCurl*MVP
 
 
 class SurveyTDEM(Survey.BaseSurvey):
@@ -131,27 +168,27 @@ class SurveyTDEM(Survey.BaseSurvey):
         self.srcList = srcList
         Survey.BaseSurvey.__init__(self, **kwargs)
 
-    def projectFields(self, u):
+    def eval(self, u):
         data = Survey.Data(self)
         for src in self.srcList:
             for rx in src.rxList:
-                data[src, rx] = rx.projectFields(src, self.mesh, self.prob.timeMesh, u)
+                data[src, rx] = rx.eval(src, self.mesh, self.prob.timeMesh, u)
         return data
 
-    def projectFieldsDeriv(self, u, v=None, adjoint=False):
+    def evalDeriv(self, u, v=None, adjoint=False):
         assert v is not None, 'v to multiply must be provided.'
 
         if not adjoint:
             data = Survey.Data(self)
             for src in self.srcList:
                 for rx in src.rxList:
-                    data[src, rx] = rx.projectFieldsDeriv(src, self.mesh, self.prob.timeMesh, u, v)
+                    data[src, rx] = rx.evalDeriv(src, self.mesh, self.prob.timeMesh, u, v)
             return data
         else:
             f = FieldsTDEM(self.mesh, self)
             for src in self.srcList:
                 for rx in src.rxList:
-                    Ptv = rx.projectFieldsDeriv(src, self.mesh, self.prob.timeMesh, u, v, adjoint=True)
+                    Ptv = rx.evalDeriv(src, self.mesh, self.prob.timeMesh, u, v, adjoint=True)
                     Ptv = Ptv.reshape((-1, self.prob.timeMesh.nN), order='F')
                     if rx.projField not in f: # first time we are projecting
                         f[src, rx.projField, :] = Ptv

SimPEG/EM/Utils/EMUtils.py

@@ -13,37 +13,4 @@ def k(freq, sigma, mu=mu_0, eps=epsilon_0):
     beta = w * np.sqrt( mu*eps/2 * ( np.sqrt(1. + (sigma / (eps*w))**2 ) - 1) ) 
     return alp - 1j*beta
 
-# Constitutive relations
-def e_from_j(prob,j):
-    eqLocs = prob._eqLocs
-    if eqLocs is 'FE':
-        MSigmaI = prob.MeSigmaI
-    elif eqLocs is 'EF':
-        MSigmaI = prob.MfRho
-    return MSigmaI*j
-
-def j_from_e(prob,e):
-    eqLocs = prob._eqLocs
-    if eqLocs is 'FE':
-        MSigma = prob.MeSigma
-    elif eqLocs is 'EF':
-        MSigma = prob.MfRhoI
-    return MSigma*e
-
-def b_from_h(prob,h):
-    eqLocs = prob._eqLocs
-    if eqLocs is 'FE':
-        MMu = prob.MfMuiI
-    elif eqLocs is 'EF':
-        MMu = prob.MeMu
-    return MMu*h
-
-def h_from_b(prob,b):
-    eqLocs = prob._eqLocs
-    if eqLocs is 'FE':
-        MMuI = prob.MfMui
-    elif eqLocs is 'EF':
-        MMuI = prob.MeMuI
-    return MMuI*b 
-
 

SimPEG/EM/Utils/__init__.py

@@ -1,5 +1,2 @@
-# import Sources
-# import Ana
-# import Solver
-from EMUtils import omega, e_from_j, j_from_e, b_from_h, h_from_b
+from EMUtils import omega, k
 from AnalyticUtils import MagneticDipoleFields, MagneticDipoleVectorPotential, MagneticLoopVectorPotential

SimPEG/EM/Utils/testingUtils.py

@@ -4,63 +4,77 @@ from SimPEG import EM
 import sys
 from scipy.constants import mu_0
 
-def getFDEMProblem(fdemType, comp, SrcList, freq, verbose=False):
-    cs = 5.
-    ncx, ncy, ncz = 6, 6, 6
-    npad = 3
+FLR = 1e-20 # "zero", so if residual below this --> pass regardless of order
+CONDUCTIVITY = 1e1
+MU = mu_0
+freq = 5e-1
+
+
+def getFDEMProblem(fdemType, comp, SrcList, freq, useMu=False, verbose=False):
+    cs = 10.
+    ncx, ncy, ncz = 0, 0, 0
+    npad = 8
     hx = [(cs,npad,-1.3), (cs,ncx), (cs,npad,1.3)]
     hy = [(cs,npad,-1.3), (cs,ncy), (cs,npad,1.3)]
     hz = [(cs,npad,-1.3), (cs,ncz), (cs,npad,1.3)]
     mesh = Mesh.TensorMesh([hx,hy,hz],['C','C','C'])
 
-    mapping = Maps.ExpMap(mesh)
+    if useMu is True:
+        mapping = [('sigma', Maps.ExpMap(mesh)), ('mu', Maps.IdentityMap(mesh))]
+    else:
+        mapping = Maps.ExpMap(mesh)
 
-    x = np.array([np.linspace(-30,-15,3),np.linspace(15,30,3)]) #don't sample right by the source
-    XYZ = Utils.ndgrid(x,x,np.r_[0.])
-    Rx0 = EM.FDEM.Rx(XYZ, comp)
+    x = np.array([np.linspace(-5.*cs,-2.*cs,3),np.linspace(5.*cs,2.*cs,3)]) + cs/4. #don't sample right by the source, slightly off alignment from either staggered grid
+    XYZ = Utils.ndgrid(x,x,np.linspace(-2.*cs,2.*cs,5))
+    Rx0 = getattr(EM.FDEM.Rx, 'Point_' + comp[0])
+    if comp[2] == 'r':
+        real_or_imag = 'real'
+    elif comp[2] == 'i':
+        real_or_imag = 'imag'
+    rx0 = Rx0(XYZ, comp[1], 'imag')
 
     Src = []
 
     for SrcType in SrcList:
         if SrcType is 'MagDipole':
-            Src.append(EM.FDEM.Src.MagDipole([Rx0], freq=freq, loc=np.r_[0.,0.,0.]))
+            Src.append(EM.FDEM.Src.MagDipole([rx0], freq=freq, loc=np.r_[0.,0.,0.]))
         elif SrcType is 'MagDipole_Bfield':
-            Src.append(EM.FDEM.Src.MagDipole_Bfield([Rx0], freq=freq, loc=np.r_[0.,0.,0.]))
+            Src.append(EM.FDEM.Src.MagDipole_Bfield([rx0], freq=freq, loc=np.r_[0.,0.,0.]))
         elif SrcType is 'CircularLoop':
-            Src.append(EM.FDEM.Src.CircularLoop([Rx0], freq=freq, loc=np.r_[0.,0.,0.]))
+            Src.append(EM.FDEM.Src.CircularLoop([rx0], freq=freq, loc=np.r_[0.,0.,0.]))
         elif SrcType is 'RawVec':
             if fdemType is 'e' or fdemType is 'b':
                 S_m = np.zeros(mesh.nF)
                 S_e = np.zeros(mesh.nE)
-                S_m[Utils.closestPoints(mesh,[0.,0.,0.],'Fz') + np.sum(mesh.vnF[:1])] = 1.
-                S_e[Utils.closestPoints(mesh,[0.,0.,0.],'Ez') + np.sum(mesh.vnE[:1])] = 1.
-                Src.append(EM.FDEM.Src.RawVec([Rx0], freq, S_m, S_e))
+                S_m[Utils.closestPoints(mesh,[0.,0.,0.],'Fz') + np.sum(mesh.vnF[:1])] = 1e-3
+                S_e[Utils.closestPoints(mesh,[0.,0.,0.],'Ez') + np.sum(mesh.vnE[:1])] = 1e-3
+                Src.append(EM.FDEM.Src.RawVec([rx0], freq, S_m, mesh.getEdgeInnerProduct()*S_e))
 
             elif fdemType is 'h' or fdemType is 'j':
                 S_m = np.zeros(mesh.nE)
                 S_e = np.zeros(mesh.nF)
-                S_m[Utils.closestPoints(mesh,[0.,0.,0.],'Ez') + np.sum(mesh.vnE[:1])] = 1.
-                S_e[Utils.closestPoints(mesh,[0.,0.,0.],'Fz') + np.sum(mesh.vnF[:1])] = 1.
-                Src.append(EM.FDEM.Src.RawVec([Rx0], freq, S_m, S_e))
+                S_m[Utils.closestPoints(mesh,[0.,0.,0.],'Ez') + np.sum(mesh.vnE[:1])] = 1e-3
+                S_e[Utils.closestPoints(mesh,[0.,0.,0.],'Fz') + np.sum(mesh.vnF[:1])] = 1e-3
+                Src.append(EM.FDEM.Src.RawVec([rx0], freq, mesh.getEdgeInnerProduct()*S_m, S_e))
 
     if verbose:
         print '  Fetching %s problem' % (fdemType)
 
     if fdemType == 'e':
         survey = EM.FDEM.Survey(Src)
-        prb = EM.FDEM.Problem_e(mesh, mapping=mapping)
+        prb = EM.FDEM.Problem3D_e(mesh, mapping=mapping)
 
     elif fdemType == 'b':
         survey = EM.FDEM.Survey(Src)
-        prb = EM.FDEM.Problem_b(mesh, mapping=mapping)
+        prb = EM.FDEM.Problem3D_b(mesh, mapping=mapping)
 
     elif fdemType == 'j':
         survey = EM.FDEM.Survey(Src)
-        prb = EM.FDEM.Problem_j(mesh, mapping=mapping)
+        prb = EM.FDEM.Problem3D_j(mesh, mapping=mapping)
 
     elif fdemType == 'h':
         survey = EM.FDEM.Survey(Src)
-        prb = EM.FDEM.Problem_h(mesh, mapping=mapping)
+        prb = EM.FDEM.Problem3D_h(mesh, mapping=mapping)
 
     else:
         raise NotImplementedError()
@@ -70,6 +84,48 @@ def getFDEMProblem(fdemType, comp, SrcList, freq, verbose=False):
         from pymatsolver import MumpsSolver
         prb.Solver = MumpsSolver
     except ImportError, e:
-        pass
+        prb.Solver = SolverLU
 
-    return prb
+    return prb
+
+def crossCheckTest(SrcList, fdemType1, fdemType2, comp, addrandoms = False, useMu=False, TOL=1e-5, verbose=False):
+
+    l2norm = lambda r: np.sqrt(r.dot(r))
+
+    prb1 = getFDEMProblem(fdemType1, comp, SrcList, freq, useMu, verbose)
+    mesh = prb1.mesh
+    print 'Cross Checking Forward: %s, %s formulations - %s' % (fdemType1, fdemType2, comp)
+
+    logsig = np.log(np.ones(mesh.nC)*CONDUCTIVITY)
+    mu = np.ones(mesh.nC)*MU
+
+    if addrandoms is True:
+        logsig  += np.random.randn(mesh.nC)*np.log(CONDUCTIVITY)*1e-1
+        mu += np.random.randn(mesh.nC)*MU*1e-1
+
+    if useMu is True:
+        m = np.r_[logsig, mu]
+    else:
+        m = logsig
+
+    survey1 = prb1.survey
+    d1 = survey1.dpred(m)
+
+    if verbose:
+        print '  Problem 1 solved'
+
+
+    prb2 = getFDEMProblem(fdemType2, comp, SrcList, freq, useMu, verbose)
+
+    survey2 = prb2.survey
+    d2 = survey2.dpred(m)
+
+    if verbose:
+        print '  Problem 2 solved'
+
+    r = d2-d1
+    l2r = l2norm(r)
+
+    tol = np.max([TOL*(10**int(np.log10(0.5* (l2norm(d1) + l2norm(d2)) ))),FLR])
+    print l2norm(d1), l2norm(d2),  l2r , tol, l2r < tol
+    return l2r < tol

SimPEG/EM/__init__.py

@@ -1,6 +1,7 @@
-# from EM import *
 import TDEM
 import FDEM
+import Static
 import Base
 import Analytics
 import Utils
+from scipy.constants import mu_0, epsilon_0

SimPEG/Examples/DC_Analytic_Dipole.py

@@ -0,0 +1,68 @@
+from SimPEG import *
+import SimPEG.DCIP as DC
+
+def run(plotIt=False):
+    cs = 25.
+    hx = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hy = [(cs,7, -1.3),(cs,21),(cs,7, 1.3)]
+    hz = [(cs,7, -1.3),(cs,20)]
+    mesh = Mesh.TensorMesh([hx, hy, hz], 'CCN')
+    sighalf = 1e-2
+    sigma = np.ones(mesh.nC)*sighalf
+    xtemp = np.linspace(-150, 150, 21)
+    ytemp = np.linspace(-150, 150, 21)
+    xyz_rxP = Utils.ndgrid(xtemp-10., ytemp, np.r_[0.])
+    xyz_rxN = Utils.ndgrid(xtemp+10., ytemp, np.r_[0.])
+    xyz_rxM = Utils.ndgrid(xtemp, ytemp, np.r_[0.])
+
+    # if plotIt:
+    #     fig, ax = plt.subplots(1,1, figsize = (5,5))
+    #     mesh.plotSlice(sigma, grid=True, ax = ax)
+    #     ax.plot(xyz_rxP[:,0],xyz_rxP[:,1], 'w.')
+    #     ax.plot(xyz_rxN[:,0],xyz_rxN[:,1], 'r.', ms = 3)
+
+    rx = DC.RxDipole(xyz_rxP, xyz_rxN)
+    src = DC.SrcDipole([rx], [-200, 0, -12.5], [+200, 0, -12.5])
+    survey = DC.SurveyDC([src])
+    problem = DC.ProblemDC_CC(mesh)
+    problem.pair(survey)
+    try:
+        from pymatsolver import MumpsSolver
+        problem.Solver = MumpsSolver
+    except Exception, e:
+        pass
+    data = survey.dpred(sigma)
+
+    def DChalf(srclocP, srclocN, rxloc, sigma, I=1.):
+        rp = (srclocP.reshape([1,-1])).repeat(rxloc.shape[0], axis = 0)
+        rn = (srclocN.reshape([1,-1])).repeat(rxloc.shape[0], axis = 0)
+        rP = np.sqrt(((rxloc-rp)**2).sum(axis=1))
+        rN = np.sqrt(((rxloc-rn)**2).sum(axis=1))
+        return I/(sigma*2.*np.pi)*(1/rP-1/rN)
+
+    data_anaP = DChalf(np.r_[-200, 0, 0.],np.r_[+200, 0, 0.], xyz_rxP, sighalf)
+    data_anaN = DChalf(np.r_[-200, 0, 0.],np.r_[+200, 0, 0.], xyz_rxN, sighalf)
+    data_ana = data_anaP-data_anaN
+    Data_ana = data_ana.reshape((21, 21), order = 'F')
+    Data = data.reshape((21, 21), order = 'F')
+    X = xyz_rxM[:,0].reshape((21, 21), order = 'F')
+    Y = xyz_rxM[:,1].reshape((21, 21), order = 'F')
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        fig, ax = plt.subplots(1,2, figsize = (12, 5))
+        vmin = np.r_[data, data_ana].min()
+        vmax = np.r_[data, data_ana].max()
+        dat1 = ax[1].contourf(X, Y, Data, 60, vmin = vmin, vmax = vmax)
+        dat0 = ax[0].contourf(X, Y, Data_ana, 60, vmin = vmin, vmax = vmax)
+        cb0 = plt.colorbar(dat1, orientation = 'horizontal', ax = ax[0])
+        cb1 = plt.colorbar(dat1, orientation = 'horizontal', ax = ax[1])
+        ax[1].set_title('Analytic')
+        ax[0].set_title('Computed')
+        plt.show()
+
+    return np.linalg.norm(data-data_ana)/np.linalg.norm(data_ana)
+
+
+if __name__ == '__main__':
+    print run(plotIt=True)

SimPEG/Examples/DC_Forward_PseudoSection.py

@@ -0,0 +1,208 @@
+from SimPEG import Mesh, Utils, np, sp
+import SimPEG.DCIP as DC
+import time
+
+def run(loc=None, sig=None, radi=None, param=None, surveyType='dipole-dipole', unitType='appConductivity', plotIt=True):
+    """
+        DC Forward Simulation
+        =====================
+
+        Forward model two conductive spheres in a half-space and plot a
+        pseudo-section. Assumes an infinite line source and measures along the
+        center of the spheres.
+
+        INPUT:
+        loc     = Location of spheres [[x1,y1,z1],[x2,y2,z2]]
+        radi    = Radius of spheres [r1,r2]
+        param   = Conductivity of background and two spheres [m0,m1,m2]
+        surveyType = survey type 'pole-dipole' or 'dipole-dipole'
+        unitType = Data type "appResistivity" | "appConductivity"  | "volt"
+        Created by @fourndo
+
+    """
+
+    assert surveyType in ['pole-dipole', 'dipole-dipole'], "Source type (surveyType) must be pdp or dpdp (pole dipole or dipole dipole)"
+    assert unitType in ['appResistivity', 'appConductivity', 'volt'], "Unit type (unitType) must be appResistivity or appConductivity or volt (potential)"
+
+    if loc is None:
+        loc = np.c_[[-50.,0.,-50.],[50.,0.,-50.]]
+    if sig is None:
+        sig = np.r_[1e-2,1e-1,1e-3]
+    if radi is None:
+        radi = np.r_[25.,25.]
+    if param is None:
+        param = np.r_[30.,30.,5]
+
+
+    # First we need to create a mesh and a model.
+    # This is our mesh
+    dx    = 5.
+
+    hxind = [(dx,15,-1.3), (dx, 75), (dx,15,1.3)]
+    hyind = [(dx,15,-1.3), (dx, 10), (dx,15,1.3)]
+    hzind = [(dx,15,-1.3),(dx, 15)]
+
+    mesh = Mesh.TensorMesh([hxind, hyind, hzind], 'CCN')
+
+
+    # Set background conductivity
+    model = np.ones(mesh.nC) * sig[0]
+
+    # First anomaly
+    ind = Utils.ModelBuilder.getIndicesSphere(loc[:,0],radi[0],mesh.gridCC)
+    model[ind] = sig[1]
+
+    # Second anomaly
+    ind = Utils.ModelBuilder.getIndicesSphere(loc[:,1],radi[1],mesh.gridCC)
+    model[ind] = sig[2]
+
+    # Get index of the center
+    indy = int(mesh.nCy/2)
+
+    # Plot the model for reference
+    # Define core mesh extent
+    xlim = 200
+    zlim = 100
+
+    # Then specify the end points of the survey. Let's keep it simple for now and survey above the anomalies, top of the mesh
+    ends = [(-175,0),(175,0)]
+    ends = np.c_[np.asarray(ends),np.ones(2).T*mesh.vectorNz[-1]]
+
+    # Snap the endpoints to the grid. Easier to create 2D section.
+    indx = Utils.closestPoints(mesh, ends )
+    locs = np.c_[mesh.gridCC[indx,0],mesh.gridCC[indx,1],np.ones(2).T*mesh.vectorNz[-1]]
+
+    # We will handle the geometry of the survey for you and create all the combination of tx-rx along line
+    # [Tx, Rx] = DC.gen_DCIPsurvey(locs, mesh, surveyType, param[0], param[1], param[2])
+    survey, Tx, Rx = DC.gen_DCIPsurvey(locs, mesh, surveyType, param[0], param[1], param[2])
+
+    # Define some global geometry
+    dl_len = np.sqrt( np.sum((locs[0,:] - locs[1,:])**2) )
+    dl_x = ( Tx[-1][0,1] - Tx[0][0,0] ) / dl_len
+    dl_y = ( Tx[-1][1,1] - Tx[0][1,0]  ) / dl_len
+    #azm =  np.arctan(dl_y/dl_x)
+
+    #Set boundary conditions
+    mesh.setCellGradBC('neumann')
+
+    # Define the linear system needed for the DC problem. We assume an infitite
+    # line source for simplicity.
+    Div = mesh.faceDiv
+    Grad = mesh.cellGrad
+    Msig = Utils.sdiag(1./(mesh.aveF2CC.T*(1./model)))
+
+    A = Div*Msig*Grad
+
+    # Change one corner to deal with nullspace
+    A[0,0] = 1
+    A = sp.csc_matrix(A)
+
+    # We will solve the system iteratively, so a pre-conditioner is helpful
+    # This is simply a Jacobi preconditioner (inverse of the main diagonal)
+    dA = A.diagonal()
+    P = sp.spdiags(1/dA,0,A.shape[0],A.shape[0])
+
+    # Now we can solve the system for all the transmitters
+    # We want to store the data
+    data = []
+
+    # There is probably a more elegant way to do this, but we can just for-loop through the transmitters
+    for ii in range(len(Tx)):
+
+        start_time = time.time() # Let's time the calculations
+
+        #print("Transmitter %i / %i\r" % (ii+1,len(Tx)))
+
+        # Select dipole locations for receiver
+        rxloc_M = np.asarray(Rx[ii][:,0:3])
+        rxloc_N = np.asarray(Rx[ii][:,3:])
+
+
+        # For usual cases 'dipole-dipole' or "gradient"
+        if surveyType == 'pole-dipole':
+            # Create an "inifinity" pole
+            tx =  np.squeeze(Tx[ii][:,0:1])
+            tinf = tx + np.array([dl_x,dl_y,0])*dl_len*2
+            inds = Utils.closestPoints(mesh, np.c_[tx,tinf].T)
+            RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T, 'CC').T*( [-1] / mesh.vol[inds] )
+        else:
+            inds = Utils.closestPoints(mesh, np.asarray(Tx[ii]).T )
+            RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T, 'CC').T*( [-1,1] / mesh.vol[inds] )
+
+        # Iterative Solve
+        Ainvb = sp.linalg.bicgstab(P*A,P*RHS, tol=1e-5)
+
+        # We now have the potential everywhere
+        phi = Utils.mkvc(Ainvb[0])
+
+        # Solve for phi on pole locations
+        P1 = mesh.getInterpolationMat(rxloc_M, 'CC')
+        P2 = mesh.getInterpolationMat(rxloc_N, 'CC')
+
+        # Compute the potential difference
+        dtemp = (P1*phi - P2*phi)*np.pi
+
+        data.append( dtemp )
+        print '\rTransmitter {0} of {1} -> Time:{2} sec'.format(ii,len(Tx),time.time()- start_time),
+
+    print 'Transmitter {0} of {1}'.format(ii,len(Tx))
+    print 'Forward completed'
+
+    # Let's just convert the 3D format into 2D (distance along line) and plot
+    survey2D = DC.convertObs_DC3D_to_2D(survey, np.ones(survey.nSrc) , 'Xloc')
+    survey2D.dobs =np.hstack(data)
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        fig = plt.figure(figsize=(7,7))
+        ax = plt.subplot(2,1,1, aspect='equal')
+        # Plot the location of the spheres for reference
+        circle1=plt.Circle((loc[0,0], loc[2,0]), radi[0], color='w', fill=False, lw=3)
+        circle2=plt.Circle((loc[0,1], loc[2,1]), radi[1], color='k', fill=False, lw=3)
+        ax.add_artist(circle1)
+        ax.add_artist(circle2)
+
+        dat = mesh.plotSlice(np.log10(model), ax = ax, normal = 'Y',
+                             ind = indy,grid=True, clim = np.log10([sig.min(),sig.max()]))
+
+        ax.set_title('3-D model')
+        plt.gca().set_aspect('equal', adjustable='box')
+
+        plt.scatter(Tx[0][0,:],Tx[0][2,:],s=40,c='g', marker='v')
+        plt.scatter(Rx[0][:,0::3],Rx[0][:,2::3],s=40,c='y')
+        plt.xlim([-xlim,xlim])
+        plt.ylim([-zlim,mesh.vectorNz[-1]+dx])
+
+
+        pos =  ax.get_position()
+        ax.set_position([pos.x0 , pos.y0 + 0.025 ,  pos.width, pos.height])
+        pos =  ax.get_position()
+        cbarax = fig.add_axes([pos.x0 , pos.y0 + 0.025 ,  pos.width, pos.height * 0.04])  ## the parameters are the specified position you set
+        cb = fig.colorbar(dat[0],cax=cbarax, orientation="horizontal",
+                          ax = ax, ticks=np.linspace(np.log10(sig.min()),
+                         np.log10(sig.max()), 3), format="$10^{%.1f}$")
+        cb.set_label("Conductivity (S/m)",size=12)
+        cb.ax.tick_params(labelsize=12)
+
+        # Second plot for the predicted apparent resistivity data
+        ax2 = plt.subplot(2,1,2, aspect='equal')
+
+        # Plot the location of the spheres for reference
+        circle1=plt.Circle((loc[0,0], loc[2,0]), radi[0], color='w', fill=False, lw=3)
+        circle2=plt.Circle((loc[0,1], loc[2,1]), radi[1], color='k', fill=False, lw=3)
+        ax2.add_artist(circle1)
+        ax2.add_artist(circle2)
+
+        # Add the speudo section
+        dat = DC.plot_pseudoSection(survey2D, ax2, surveyType=surveyType, unitType=unitType)        # plt.scatter(Tx2d[0][:],Tx[0][2,:],s=40,c='g', marker='v')
+        # plt.scatter(Rx2d[0][:],Rx[0][:,2::3],s=40,c='y')
+        # plt.plot(np.r_[Tx2d[0][0],Rx2d[-1][-1,-1]],np.ones(2)*mesh.vectorNz[-1], color='k')
+        ax2.set_title('Apparent Conductivity data')
+
+        plt.ylim([-zlim,mesh.vectorNz[-1]+dx])
+        plt.show()
+
+        return fig, ax
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/EM_FDEM_1D_Inversion.py

@@ -1,7 +1,7 @@
 from SimPEG import *
 import SimPEG.EM as EM
-from scipy.constants import mu_0
-import matplotlib.pyplot as plt
+from SimPEG.EM import mu_0
+
 
 def run(plotIt=True):
     """
@@ -17,52 +17,61 @@ def run(plotIt=True):
     hz = [(cs,npad,-1.3), (cs,ncz), (cs,npad,1.3)]
     mesh = Mesh.CylMesh([hx,1,hz], '00C')
 
+    layerz = -100.
+
     active = mesh.vectorCCz<0.
-    layer = (mesh.vectorCCz<0.) & (mesh.vectorCCz>=-100.)
-    actMap = Maps.ActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
-    mapping = Maps.ExpMap(mesh) * Maps.Vertical1DMap(mesh) * actMap
-    sig_half = 2e-3
+    layer = (mesh.vectorCCz<0.) & (mesh.vectorCCz>=layerz)
+    actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
+    mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
+    sig_half = 2e-2
     sig_air = 1e-8
-    sig_layer = 1e-3
+    sig_layer = 1e-2
     sigma = np.ones(mesh.nCz)*sig_air
     sigma[active] = sig_half
     sigma[layer] = sig_layer
     mtrue = np.log(sigma[active])
 
-
     if plotIt:
+        import matplotlib.pyplot as plt
         fig, ax = plt.subplots(1,1, figsize = (3, 6))
         plt.semilogx(sigma[active], mesh.vectorCCz[active])
-        ax.set_ylim(-600, 0)
-        ax.set_xlim(1e-4, 1e-2)
+        ax.set_ylim(-500, 0)
+        ax.set_xlim(1e-3, 1e-1)
         ax.set_xlabel('Conductivity (S/m)', fontsize = 14)
         ax.set_ylabel('Depth (m)', fontsize = 14)
         ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
 
 
-    rxOffset=1e-3
-    rx = EM.TDEM.RxTDEM(np.array([[rxOffset, 0., 30]]), np.logspace(-5,-3, 31), 'bz')
-    src = EM.TDEM.SrcTDEM_VMD_MVP([rx], np.array([0., 0., 80]))
-    survey = EM.TDEM.SurveyTDEM([src])
-    prb = EM.TDEM.ProblemTDEM_b(mesh, mapping=mapping)
+    rxOffset=10.
+    bzi = EM.FDEM.Rx.Point_b(np.array([[rxOffset, 0., 1e-3]]), orientation='z', component='imag')
+
+    freqs = np.logspace(1,3,10)
+    srcLoc = np.array([0., 0., 10.])
+
+    srcList = [EM.FDEM.Src.MagDipole([bzi],freq, srcLoc,orientation='Z') for freq in freqs]
+
+    survey = EM.FDEM.Survey(srcList)
+    prb = EM.FDEM.Problem3D_b(mesh, mapping=mapping)
+
+    try:
+        from pymatsolver import MumpsSolver
+        prb.Solver = MumpsSolver
+    except ImportError, e:
+        prb.Solver = SolverLU
 
-    prb.Solver = SolverLU
-    prb.timeSteps = [(1e-06, 20),(1e-05, 20), (0.0001, 20)]
     prb.pair(survey)
-    dtrue = survey.dpred(mtrue)
 
-
-    survey.dtrue = dtrue
     std = 0.05
-    noise = std*abs(survey.dtrue)*np.random.randn(*survey.dtrue.shape)
-    survey.dobs = survey.dtrue+noise
-    survey.std = survey.dobs*0 + std
-    survey.Wd = 1/(abs(survey.dobs)*std)
+    survey.makeSyntheticData(mtrue, std)
+
+    survey.std = std
+    survey.eps = np.linalg.norm(survey.dtrue)*1e-5
 
     if plotIt:
-        fig, ax = plt.subplots(1,1, figsize = (10, 6))
-        ax.loglog(rx.times, dtrue, 'b.-')
-        ax.loglog(rx.times, survey.dobs, 'r.-')
+        import matplotlib.pyplot as plt
+        fig, ax = plt.subplots(1,1, figsize = (6, 6))
+        ax.semilogx(freqs,survey.dtrue[:freqs.size], 'b.-')
+        ax.semilogx(freqs,survey.dobs[:freqs.size], 'r.-')
         ax.legend(('Noisefree', '$d^{obs}$'), fontsize = 16)
         ax.set_xlabel('Time (s)', fontsize = 14)
         ax.set_ylabel('$B_z$ (T)', fontsize = 16)
@@ -72,14 +81,15 @@ def run(plotIt=True):
     dmisfit = DataMisfit.l2_DataMisfit(survey)
     regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
     reg = Regularization.Tikhonov(regMesh)
-    opt = Optimization.InexactGaussNewton(maxIter = 5)
+    opt = Optimization.InexactGaussNewton(maxIter = 6)
     invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
+
     # Create an inversion object
     beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
     betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
     inv = Inversion.BaseInversion(invProb, directiveList=[beta,betaest])
     m0 = np.log(np.ones(mtrue.size)*sig_half)
-    reg.alpha_s = 1e-2
+    reg.alpha_s = 1e-3
     reg.alpha_x = 1.
     prb.counter = opt.counter = Utils.Counter()
     opt.LSshorten = 0.5
@@ -88,15 +98,16 @@ def run(plotIt=True):
     mopt = inv.run(m0)
 
     if plotIt:
+        import matplotlib.pyplot as plt
         fig, ax = plt.subplots(1,1, figsize = (3, 6))
         plt.semilogx(sigma[active], mesh.vectorCCz[active])
         plt.semilogx(np.exp(mopt), mesh.vectorCCz[active])
-        ax.set_ylim(-600, 0)
-        ax.set_xlim(1e-4, 1e-2)
+        ax.set_ylim(-500, 0)
+        ax.set_xlim(1e-3, 1e-1)
         ax.set_xlabel('Conductivity (S/m)', fontsize = 14)
         ax.set_ylabel('Depth (m)', fontsize = 14)
         ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
-        plt.legend(['$\sigma_{true}$', '$\sigma_{pred}$'])
+        plt.legend(['$\sigma_{true}$', '$\sigma_{pred}$'],loc='best')
         plt.show()
 
 

SimPEG/Examples/EM_FDEM_Analytic_MagDipoleWholespace.py

@@ -0,0 +1,43 @@
+from SimPEG import *
+import SimPEG.EM as EM
+
+def run(XYZ=None, loc=np.r_[0.,0.,0.], sig=1.0, freq=1.0, orientation='Z', plotIt=True):
+    """
+        EM: Magnetic Dipole in a Whole-Space
+        ====================================
+
+        Here we plot the magnetic flux density from a harmonic dipole in a wholespace.
+
+    """
+
+    if XYZ is None:
+        x = np.arange(-100.5,100.5,step = 1.) #(avoid putting measurement points where source is located)
+        y = np.r_[0]
+        z = x
+        XYZ = Utils.ndgrid(x,y,z)
+
+
+    Bx, By, Bz = EM.Analytics.FDEM.MagneticDipoleWholeSpace(XYZ, loc, sig, freq, orientation=orientation)
+    absB = np.sqrt(Bx*Bx.conj()+By*By.conj()+Bz*Bz.conj()).real
+
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        from matplotlib.colors import LogNorm
+        fig, ax = plt.subplots(1,1,figsize=(6,5))
+        bxplt = Bx.reshape(x.size,z.size)
+        bzplt = Bz.reshape(x.size,z.size)
+        pc = ax.pcolor(x,z,absB.reshape(x.size,z.size),norm=LogNorm())
+        ax.streamplot(x,z,bxplt.real,bzplt.real,color='k',density=1)
+        ax.set_xlim([x.min(),x.max()])
+        ax.set_ylim([z.min(),z.max()])
+        ax.set_xlabel('x')
+        ax.set_ylabel('z')
+        cb = plt.colorbar(pc,ax = ax)
+        cb.set_label('|B| (T)')
+        plt.show()
+
+        return fig, ax
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/EM_Schenkel_Morrison_Casing.py

@@ -0,0 +1,275 @@
+from SimPEG import *
+from SimPEG.EM import FDEM, Analytics, mu_0
+import time
+
+try:
+    from pymatsolver import MumpsSolver
+    solver = MumpsSolver
+except Exception:
+    solver = SolverLU
+    pass
+
+def run(plotIt=True):
+    """
+        EM: Schenkel and Morrison Casing Model
+        ======================================
+
+        Here we create and run a FDEM forward simulation to calculate the vertical
+        current inside a steel-cased. The model is based on the Schenkel and
+        Morrison Casing Model, and the results are used in a 2016 SEG abstract by
+        Yang et al.
+
+        - Schenkel, C.J., and H.F. Morrison, 1990, Effects of well casing on potential field measurements using downhole current sources: Geophysical prospecting, 38, 663-686.
+
+
+        The model consists of:
+        - Air: Conductivity 1e-8 S/m, above z = 0
+        - Background: conductivity 1e-2 S/m, below z = 0
+        - Casing: conductivity 1e6 S/m
+            - 300m long
+            - radius of 0.1m
+            - thickness of 6e-3m
+
+        Inside the casing, we take the same conductivity as the background.
+
+        We are using an EM code to simulate DC, so we use frequency low enough
+        that the skin depth inside the casing is longer than the casing length (f
+        = 1e-6 Hz). The plot produced is of the current inside the casing.
+
+        These results are shown in the SEG abstract by Yang et al., 2016: 3D DC
+        resistivity modeling of steel casing for reservoir monitoring using
+        equivalent resistor network. The solver used to produce these results and
+        achieve the CPU time of ~30s is Mumps, which was installed using pymatsolver_
+
+        .. _pymatsolver: https://github.com/rowanc1/pymatsolver
+
+        This example is on figshare: https://dx.doi.org/10.6084/m9.figshare.3126961.v1
+
+        If you would use this example for a code comparison, or build upon it, a
+        citation would be much appreciated!
+
+    """
+
+    if plotIt:
+        import matplotlib.pylab as plt
+
+    # ------------------ MODEL ------------------
+    sigmaair = 1e-8 # air
+    sigmaback = 1e-2 # background
+    sigmacasing = 1e6 # casing
+    sigmainside = sigmaback # inside the casing
+
+
+    casing_t = 0.006  # 1cm thickness
+    casing_l = 300   # length of the casing
+
+    casing_r = 0.1
+    casing_a = casing_r - casing_t/2. # inner radius
+    casing_b = casing_r + casing_t/2. # outer radius
+    casing_z = np.r_[-casing_l,0.]
+
+
+    # ------------------ SURVEY PARAMETERS ------------------
+    freqs = np.r_[1e-6] #[1e-1, 1, 5] # frequencies
+    dsz = -300 # down-hole z source location
+    src_loc = np.r_[0.,0.,dsz]
+    inf_loc = np.r_[0.,0.,1e4]
+
+    print 'Skin Depth: ', [(500./np.sqrt(sigmaback*_)) for _ in freqs]
+
+
+    # ------------------ MESH ------------------
+    # fine cells near well bore
+    csx1, csx2 = 2e-3, 60.
+    pfx1, pfx2 = 1.3, 1.3
+    ncx1 = np.ceil(casing_b/csx1+2)
+
+    # pad nicely to second cell size
+    npadx1 = np.floor(np.log(csx2/csx1) / np.log(pfx1))
+    hx1a,hx1b = Utils.meshTensor([(csx1,ncx1)]),Utils.meshTensor([(csx1,npadx1,pfx1)])
+    dx1 = sum(hx1a)+sum(hx1b)
+    dx1 = np.floor(dx1/csx2)
+    hx1b *= (dx1*csx2 - sum(hx1a))/sum(hx1b)
+
+    # second chunk of mesh
+    dx2 = 300. # uniform mesh out to here
+    ncx2 = np.ceil((dx2 - dx1)/csx2)
+    npadx2 = 45
+    hx2a, hx2b = Utils.meshTensor([(csx2,ncx2)]), Utils.meshTensor([(csx2,npadx2,pfx2)])
+    hx = np.hstack([hx1a,hx1b,hx2a,hx2b])
+
+    # z-direction
+    csz = 0.05
+    nza = 10
+    ncz, npadzu, npadzd = np.int(np.ceil(np.diff(casing_z)[0]/csz))+10, 68, 68 # cell size, number of core cells, number of padding cells in the x- direction
+    hz = Utils.meshTensor([(csz,npadzd,-1.3), (csz,ncz), (csz,npadzu,1.3)]) # vector of cell widths in the z-direction
+
+    # Mesh
+    mesh = Mesh.CylMesh([hx,1.,hz], [0.,0.,-np.sum(hz[:npadzu+ncz-nza])])
+
+    print 'Mesh Extent xmax: %f,: zmin: %f, zmax: %f'%(mesh.vectorCCx.max(), mesh.vectorCCz.min(), mesh.vectorCCz.max())
+    print 'Number of cells', mesh.nC
+
+    if plotIt is True:
+        fig, ax = plt.subplots(1, 1, figsize=(6, 4))
+        ax.set_title('Simulation Mesh')
+        mesh.plotGrid(ax=ax)
+        plt.show()
+
+    # Put the model on the mesh
+    sigWholespace = sigmaback*np.ones((mesh.nC))
+
+    sigBack = sigWholespace.copy()
+    sigBack[mesh.gridCC[:,2] > 0.] = sigmaair
+
+    sigCasing = sigBack.copy()
+    iCasingZ = (mesh.gridCC[:,2] <= casing_z[1]) & (mesh.gridCC[:,2] >= casing_z[0])
+    iCasingX = (mesh.gridCC[:,0] >= casing_a) & (mesh.gridCC[:,0] <= casing_b)
+    iCasing = iCasingX & iCasingZ
+    sigCasing[iCasing] = sigmacasing
+
+
+    if plotIt is True:
+
+        # plotting parameters
+        xlim = np.r_[0., 0.2]
+        zlim = np.r_[-350., 10.]
+        clim_sig = np.r_[-8,6]
+
+        # plot models
+        fig, ax = plt.subplots(1,1,figsize=(4,4))
+
+        f = plt.colorbar(mesh.plotImage(np.log10(sigCasing),ax=ax)[0], ax=ax)
+        ax.grid(which='both')
+        ax.set_title('Log_10 (Sigma)')
+        ax.set_xlim(xlim)
+        ax.set_ylim(zlim)
+        f.set_clim(clim_sig)
+
+        plt.show()
+
+
+    # -------------- Sources --------------------
+    # Define Custom Current Sources
+
+    # surface source
+    sg_x = np.zeros(mesh.vnF[0],dtype=complex)
+    sg_y = np.zeros(mesh.vnF[1],dtype=complex)
+    sg_z = np.zeros(mesh.vnF[2],dtype=complex)
+
+    nza = 2 # put the wire two cells above the surface
+    ncin = 2
+
+    # vertically directed wire
+    sgv_indx = (mesh.gridFz[:,0] > casing_a) & (mesh.gridFz[:,0] < casing_a + csx1)  # hook it up to casing at the surface
+    sgv_indz = (mesh.gridFz[:,2] <= +csz*nza) & (mesh.gridFz[:,2] >= -csz*2)
+    sgv_ind = sgv_indx & sgv_indz
+    sg_z[sgv_ind] = -1.
+
+    # horizontally directed wire
+    sgh_indx = (mesh.gridFx[:,0] > casing_a)    & (mesh.gridFx[:,0] <= inf_loc[2])
+    sgh_indz = (mesh.gridFx[:,2] > csz*(nza-0.5)) & (mesh.gridFx[:,2] < csz*(nza+0.5))
+    sgh_ind = sgh_indx & sgh_indz
+    sg_x[sgh_ind] = -1.
+
+    sgv2_indx = (mesh.gridFz[:,0] >= mesh.gridFx[sgh_ind,0].max()) & (mesh.gridFz[:,0] <= inf_loc[2]*1.2)  # hook it up to casing at the surface
+    sgv2_indz = (mesh.gridFz[:,2] <= +csz*nza) & (mesh.gridFz[:,2] >= -csz*2)
+    sgv2_ind = sgv2_indx & sgv2_indz
+    sg_z[sgv2_ind] = 1.
+
+    # assemble the source
+    sg = np.hstack([sg_x,sg_y,sg_z])
+    sg_p = [FDEM.Src.RawVec_e([],_,sg/mesh.area) for _ in freqs]
+
+    # downhole source
+    dg_x = np.zeros(mesh.vnF[0],dtype=complex)
+    dg_y = np.zeros(mesh.vnF[1],dtype=complex)
+    dg_z = np.zeros(mesh.vnF[2],dtype=complex)
+
+    # vertically directed wire
+    dgv_indx = (mesh.gridFz[:,0] < csx1)  # go through the center of the well
+    dgv_indz = (mesh.gridFz[:,2] <= +csz*nza) & (mesh.gridFz[:,2] > dsz + csz/2.)
+    dgv_ind = dgv_indx & dgv_indz
+    dg_z[dgv_ind] = -1.
+
+    # couple to the casing downhole
+    dgh_indx = mesh.gridFx[:,0] < casing_a + csx1
+    dgh_indz = (mesh.gridFx[:,2] < dsz + csz)  & (mesh.gridFx[:,2] >= dsz)
+    dgh_ind = dgh_indx & dgh_indz
+    dg_x[dgh_ind] = 1.
+
+    # horizontal part at surface
+    dgh2_indx = mesh.gridFx[:,0] <= inf_loc[2]*1.2
+    dgh2_indz = sgh_indz.copy()
+    dgh2_ind = dgh2_indx & dgh2_indz
+    dg_x[dgh2_ind] = -1.
+
+    # vertical part at surface
+    dgv2_ind = sgv2_ind.copy()
+    dg_z[dgv2_ind] = 1.
+
+    # assemble the source
+    dg = np.hstack([dg_x,dg_y,dg_z])
+    dg_p = [FDEM.Src.RawVec_e([],_,dg/mesh.area) for _ in freqs]
+
+    # ------------ Problem and Survey ---------------
+    survey = FDEM.Survey(sg_p + dg_p)
+    mapping = [('sigma', Maps.IdentityMap(mesh))]
+    problem = FDEM.Problem3D_h(mesh, mapping=mapping)
+    problem.pair(survey)
+
+    # ------------- Solve ---------------------------
+    t0 = time.time()
+    fieldsCasing = problem.fields(sigCasing)
+    print 'Time to solve 2 sources', time.time() - t0
+
+    # Plot current
+
+    # current density
+    jn0 = fieldsCasing[dg_p,'j']
+    jn1 = fieldsCasing[sg_p,'j']
+
+    # current
+    in0 = [mesh.area*fieldsCasing[dg_p,'j'][:,i] for i in range(len(freqs))]
+    in1 = [mesh.area*fieldsCasing[sg_p,'j'][:,i] for i in range(len(freqs))]
+
+    in0 = np.vstack(in0).T
+    in1 = np.vstack(in1).T
+
+    # integrate to get z-current inside casing
+    inds_inx = (mesh.gridFz[:,0] >= casing_a) & (mesh.gridFz[:,0] <= casing_b)
+    inds_inz = (mesh.gridFz[:,2] >= dsz )     & (mesh.gridFz[:,2] <= 0)
+    inds_fz = inds_inx & inds_inz
+
+    indsx = [False]*mesh.nFx
+    inds = list(indsx) + list(inds_fz)
+
+    in0_in = in0[np.r_[inds]]
+    in1_in = in1[np.r_[inds]]
+    z_in = mesh.gridFz[inds_fz,2]
+
+    in0_in = in0_in.reshape([in0_in.shape[0]/3,3])
+    in1_in = in1_in.reshape([in1_in.shape[0]/3,3])
+    z_in = z_in.reshape([z_in.shape[0]/3,3])
+
+    I0 = in0_in.sum(1).real
+    I1 = in1_in.sum(1).real
+    z_in = z_in[:,0]
+
+    if plotIt is True:
+        fig, ax = plt.subplots(1,2,figsize=(12,4))
+
+        ax[0].plot(z_in,np.absolute(I0), z_in,np.absolute(I1))
+        ax[0].legend(['top casing', 'bottom casing'],loc='best')
+        ax[0].set_title('Magnitude of Vertical Current in Casing')
+
+        ax[1].semilogy(z_in,np.absolute(I0), z_in,np.absolute(I1))
+        ax[1].legend(['top casing', 'bottom casing'],loc='best')
+        ax[1].set_title('Magnitude of Vertical Current in Casing')
+        ax[1].set_ylim([1e-2, 1.])
+
+        plt.show()
+
+if __name__ == '__main__':
+    run()
+

SimPEG/Examples/EM_TDEM_1D_Inversion.py

@@ -0,0 +1,106 @@
+from SimPEG import *
+import SimPEG.EM as EM
+from SimPEG.EM import mu_0
+
+
+def run(plotIt=True):
+    """
+        EM: TDEM: 1D: Inversion
+        =======================
+
+        Here we will create and run a TDEM 1D inversion.
+
+    """
+
+    cs, ncx, ncz, npad = 5., 25, 15, 15
+    hx = [(cs,ncx), (cs,npad,1.3)]
+    hz = [(cs,npad,-1.3), (cs,ncz), (cs,npad,1.3)]
+    mesh = Mesh.CylMesh([hx,1,hz], '00C')
+
+    active = mesh.vectorCCz<0.
+    layer = (mesh.vectorCCz<0.) & (mesh.vectorCCz>=-100.)
+    actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
+    mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
+    sig_half = 2e-3
+    sig_air = 1e-8
+    sig_layer = 1e-3
+    sigma = np.ones(mesh.nCz)*sig_air
+    sigma[active] = sig_half
+    sigma[layer] = sig_layer
+    mtrue = np.log(sigma[active])
+
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        fig, ax = plt.subplots(1,1, figsize = (3, 6))
+        plt.semilogx(sigma[active], mesh.vectorCCz[active])
+        ax.set_ylim(-600, 0)
+        ax.set_xlim(1e-4, 1e-2)
+        ax.set_xlabel('Conductivity (S/m)', fontsize = 14)
+        ax.set_ylabel('Depth (m)', fontsize = 14)
+        ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
+
+
+    rxOffset=1e-3
+    rx = EM.TDEM.RxTDEM(np.array([[rxOffset, 0., 30]]), np.logspace(-5,-3, 31), 'bz')
+    src = EM.TDEM.SrcTDEM_VMD_MVP([rx], np.array([0., 0., 80]))
+    survey = EM.TDEM.SurveyTDEM([src])
+    prb = EM.TDEM.ProblemTDEM_b(mesh, mapping=mapping)
+
+    prb.Solver = SolverLU
+    prb.timeSteps = [(1e-06, 20),(1e-05, 20), (0.0001, 20)]
+    prb.pair(survey)
+
+    # create observed data
+    std = 0.05
+    
+    survey.dobs = survey.makeSyntheticData(mtrue,std)
+    survey.std = std 
+    survey.eps = 1e-5*np.linalg.norm(survey.dobs)
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        fig, ax = plt.subplots(1,1, figsize = (10, 6))
+        ax.loglog(rx.times, survey.dtrue, 'b.-')
+        ax.loglog(rx.times, survey.dobs, 'r.-')
+        ax.legend(('Noisefree', '$d^{obs}$'), fontsize = 16)
+        ax.set_xlabel('Time (s)', fontsize = 14)
+        ax.set_ylabel('$B_z$ (T)', fontsize = 16)
+        ax.set_xlabel('Time (s)', fontsize = 14)
+        ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
+
+    dmisfit = DataMisfit.l2_DataMisfit(survey)
+    regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
+    reg = Regularization.Tikhonov(regMesh)
+    opt = Optimization.InexactGaussNewton(maxIter = 5)
+    invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
+
+    # Create an inversion object
+    beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
+    betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
+    inv = Inversion.BaseInversion(invProb, directiveList=[beta,betaest])
+    m0 = np.log(np.ones(mtrue.size)*sig_half)
+    reg.alpha_s = 1e-2
+    reg.alpha_x = 1.
+    prb.counter = opt.counter = Utils.Counter()
+    opt.LSshorten = 0.5
+    opt.remember('xc')
+
+    mopt = inv.run(m0)
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+        fig, ax = plt.subplots(1,1, figsize = (3, 6))
+        plt.semilogx(sigma[active], mesh.vectorCCz[active])
+        plt.semilogx(np.exp(mopt), mesh.vectorCCz[active])
+        ax.set_ylim(-600, 0)
+        ax.set_xlim(1e-4, 1e-2)
+        ax.set_xlabel('Conductivity (S/m)', fontsize = 14)
+        ax.set_ylabel('Depth (m)', fontsize = 14)
+        ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
+        plt.legend(['$\sigma_{true}$', '$\sigma_{pred}$'])
+        plt.show()
+
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/FLOW_Richards_1D_Celia1990.py

@@ -1,6 +1,5 @@
 from SimPEG import *
 from SimPEG.FLOW import Richards
-import matplotlib.pyplot as plt
 
 def run(plotIt=True):
     """
@@ -61,6 +60,7 @@ def run(plotIt=True):
     Hs_H120= getFields(120.,'head')
 
     if not plotIt:return
+    import matplotlib.pyplot as plt
     plt.figure(figsize=(13,5))
     plt.subplot(121)
     plt.plot(40-M.gridCC, Hs_M10[-1],'b-')

SimPEG/Examples/Forward_BasicDirectCurrent.py

@@ -1,7 +1,4 @@
 from SimPEG import Mesh, Utils, np, SolverLU
-import matplotlib.pyplot as plt
-import matplotlib
-from matplotlib.mlab import griddata
 
 ## 2D DC forward modeling example with Tensor and Curvilinear Meshes
 
@@ -39,6 +36,10 @@ def run(plotIt=True):
 
     if not plotIt: return
 
+    import matplotlib.pyplot as plt
+    import matplotlib
+    from matplotlib.mlab import griddata
+
     #Step4: Making Figure
     fig, axes = plt.subplots(1,2,figsize=(12*1.2,4*1.2))
     label = ["(a)", "(b)"]

SimPEG/Examples/Inversion_IRLS.py

@@ -0,0 +1,132 @@
+from SimPEG import *
+
+
+def run(N=200, plotIt=True):
+    """
+        Inversion: Linear Problem
+        =========================
+
+        Here we go over the basics of creating a linear problem and inversion.
+
+    """
+
+
+    np.random.seed(1)
+
+    std_noise = 1e-2
+
+    mesh = Mesh.TensorMesh([N])
+
+    m0 = np.ones(mesh.nC) * 1e-4
+    nk = 10
+    jk = np.linspace(1.,nk,nk)
+    p = -2.
+    q = 1.
+
+    g = lambda k: np.exp(p*jk[k]*mesh.vectorCCx)*np.cos(np.pi*q*jk[k]*mesh.vectorCCx)
+
+    G = np.empty((nk, mesh.nC))
+
+    for i in range(nk):
+        G[i,:] = g(i)
+
+    mtrue = np.zeros(mesh.nC)
+    mtrue[mesh.vectorCCx > 0.3] = 1.
+    mtrue[mesh.vectorCCx > 0.45] = -0.5
+    mtrue[mesh.vectorCCx > 0.6] = 0
+
+
+    prob = Problem.LinearProblem(mesh, G)
+    survey = Survey.LinearSurvey()
+    survey.pair(prob)
+    survey.dobs = prob.fields(mtrue) + std_noise * np.random.randn(nk)
+    #survey.makeSyntheticData(mtrue, std=std_noise)
+
+    wd = np.ones(nk) * std_noise
+
+    #print survey.std[0]
+    #M = prob.mesh
+    # Distance weighting
+    wr = np.sum(prob.G**2.,axis=0)**0.5
+    wr = ( wr/np.max(wr) )
+
+    reg = Regularization.Simple(mesh)
+    reg.wght = wr
+
+    dmis = DataMisfit.l2_DataMisfit(survey)
+    dmis.Wd = 1./wd
+
+    opt = Optimization.ProjectedGNCG(maxIter=30,lower=-2.,upper=2., maxIterCG= 20, tolCG = 1e-4)
+    invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
+    invProb.curModel = m0
+
+    beta = Directives.BetaSchedule(coolingFactor=2, coolingRate=1)
+    target = Directives.TargetMisfit()
+
+    betaest = Directives.BetaEstimate_ByEig()
+    inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest, target])
+
+
+    mrec = inv.run(m0)
+    ml2 = mrec
+    print "Final misfit:" + str(invProb.dmisfit.eval(mrec))
+
+    # Switch regularization to sparse
+    phim = invProb.phi_m_last
+    phid =  invProb.phi_d
+
+    reg = Regularization.Sparse(mesh)
+
+#==============================================================================
+#     fig, axes = plt.subplots(1,2,figsize=(12*1.2,4*1.2))
+#     dmdx = reg.mesh.cellDiffxStencil * mrec
+#     plt.plot(np.sort(dmdx))
+#==============================================================================
+
+    #reg.recModel = mrec
+    reg.wght = np.ones(mesh.nC)
+    reg.mref = np.zeros(mesh.nC)
+    reg.eps_p = 5e-2
+    reg.eps_q = 1e-2
+    reg.norms   = [0., 0., 2., 2.]
+    reg.wght = wr
+
+    opt = Optimization.ProjectedGNCG(maxIter=10 ,lower=-2.,upper=2., maxIterLS = 20, maxIterCG= 20, tolCG = 1e-3)
+    invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta = invProb.beta*2.)
+    beta = Directives.BetaSchedule(coolingFactor=1, coolingRate=1)
+    #betaest = Directives.BetaEstimate_ByEig()
+    target = Directives.TargetMisfit()
+    IRLS =Directives.Update_IRLS( phi_m_last = phim, phi_d_last = phid )
+
+    inv = Inversion.BaseInversion(invProb, directiveList=[beta,IRLS])
+
+    m0 = mrec
+
+    # Run inversion
+    mrec = inv.run(m0)
+
+    print "Final misfit:" + str(invProb.dmisfit.eval(mrec))
+
+
+    if plotIt:
+        import matplotlib.pyplot as plt
+
+        fig, axes = plt.subplots(1,2,figsize=(12*1.2,4*1.2))
+        for i in range(prob.G.shape[0]):
+            axes[0].plot(prob.G[i,:])
+        axes[0].set_title('Columns of matrix G')
+
+        axes[1].plot(mesh.vectorCCx, mtrue, 'b-')
+        axes[1].plot(mesh.vectorCCx, ml2, 'r-')
+        #axes[1].legend(('True Model', 'Recovered Model'))
+        axes[1].set_ylim(-1.0,1.25)
+
+        axes[1].plot(mesh.vectorCCx, mrec, 'k-',lw = 2)
+        axes[1].legend(('True Model', 'Smooth l2-l2',
+        'Sparse lp:' + str(reg.norms[0]) + ', lqx:' + str(reg.norms[1]) ), fontsize = 12)
+        plt.show()
+
+    return prob, survey, mesh, mrec
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/Inversion_Linear.py

@@ -10,28 +10,6 @@ def run(N=100, plotIt=True):
 
     """
 
-    class LinearSurvey(Survey.BaseSurvey):
-        def projectFields(self, u):
-            return u
-
-    class LinearProblem(Problem.BaseProblem):
-
-        surveyPair = LinearSurvey
-
-        def __init__(self, mesh, G, **kwargs):
-            Problem.BaseProblem.__init__(self, mesh, **kwargs)
-            self.G = G
-
-        def fields(self, m, u=None):
-            return self.G.dot(m)
-
-        def Jvec(self, m, v, u=None):
-            return self.G.dot(v)
-
-        def Jtvec(self, m, v, u=None):
-            return self.G.T.dot(v)
-
-
     np.random.seed(1)
 
     mesh = Mesh.TensorMesh([N])
@@ -53,8 +31,8 @@ def run(N=100, plotIt=True):
     mtrue[mesh.vectorCCx > 0.45] = -0.5
     mtrue[mesh.vectorCCx > 0.6] = 0
 
-    prob = LinearProblem(mesh, G)
-    survey = LinearSurvey()
+    prob = Problem.LinearProblem(mesh, G)
+    survey = Survey.LinearSurvey()
     survey.pair(prob)
     survey.makeSyntheticData(mtrue, std=0.01)
 

SimPEG/Examples/MT_1D_ForwardAndInversion.py

@@ -0,0 +1,129 @@
+import SimPEG as simpeg
+import numpy as np
+import SimPEG.MT as MT
+from scipy.constants import mu_0
+import matplotlib.pyplot as plt
+
+def run(plotIt=True):
+    """
+        MT: 1D: Inversion
+        =======================
+
+        Forward model 1D MT data.
+        Setup and run a MT 1D inversion.
+
+    """
+
+    ## Setup the forward modeling
+    # Setting up 1D mesh and conductivity models to forward model data.
+    # Frequency
+    nFreq = 31
+    freqs = np.logspace(3,-3,nFreq)
+    # Set mesh parameters
+    ct = 20
+    air = simpeg.Utils.meshTensor([(ct,16,1.4)])
+    core = np.concatenate( (  np.kron(simpeg.Utils.meshTensor([(ct,10,-1.3)]),np.ones((5,))) , simpeg.Utils.meshTensor([(ct,5)]) ) )
+    bot = simpeg.Utils.meshTensor([(core[0],10,-1.4)])
+    x0 = -np.array([np.sum(np.concatenate((core,bot)))])
+    # Make the model
+    m1d = simpeg.Mesh.TensorMesh([np.concatenate((bot,core,air))], x0=x0)
+
+    # Setup model varibles
+    active = m1d.vectorCCx<0.
+    layer1 = (m1d.vectorCCx<-500.) & (m1d.vectorCCx>=-800.)
+    layer2 = (m1d.vectorCCx<-3500.) & (m1d.vectorCCx>=-5000.)
+    # Set the conductivity values
+    sig_half = 2e-3
+    sig_air = 1e-8
+    sig_layer1 = .2
+    sig_layer2 = .2
+    # Make the true model
+    sigma_true = np.ones(m1d.nCx)*sig_air
+    sigma_true[active] = sig_half
+    sigma_true[layer1] = sig_layer1
+    sigma_true[layer2] = sig_layer2
+    # Extract the model
+    m_true = np.log(sigma_true[active])
+    # Make the background model
+    sigma_0 = np.ones(m1d.nCx)*sig_air
+    sigma_0[active] = sig_half
+    m_0 = np.log(sigma_0[active])
+
+    # Set the mapping
+    actMap = simpeg.Maps.ActiveCells(m1d, active, np.log(1e-8), nC=m1d.nCx)
+    mappingExpAct = simpeg.Maps.ExpMap(m1d) * actMap
+
+    ## Setup the layout of the survey, set the sources and the connected receivers
+    # Receivers
+    rxList = []
+    for rxType in ['z1dr','z1di']:
+        rxList.append(MT.Rx(simpeg.mkvc(np.array([0.0]),2).T,rxType))
+    # Source list
+    srcList =[]
+    for freq in freqs:
+            srcList.append(MT.SrcMT.polxy_1Dprimary(rxList,freq))
+    # Make the survey
+    survey = MT.Survey(srcList)
+    survey.mtrue = m_true
+
+    ## Set the problem
+    problem = MT.Problem1D.eForm_psField(m1d,sigmaPrimary=sigma_0,mapping=mappingExpAct)
+    problem.pair(survey)
+
+    ## Forward model data
+    # Project the data
+    survey.dtrue = survey.dpred(m_true)
+    survey.dobs = survey.dtrue + 0.025*abs(survey.dtrue)*np.random.randn(*survey.dtrue.shape)
+
+    if plotIt:
+        fig = MT.Utils.dataUtils.plotMT1DModelData(problem)
+        fig.suptitle('Target - smooth true')
+
+
+    # Assign uncertainties
+    std = 0.05 # 5% std
+    survey.std = np.abs(survey.dobs*std)
+    # Assign the data weight
+    Wd = 1./survey.std
+
+    ## Setup the inversion proceedure
+    # Define a counter
+    C =  simpeg.Utils.Counter()
+    # Set the optimization
+    opt = simpeg.Optimization.InexactGaussNewton(maxIter = 30)
+    opt.counter = C
+    opt.LSshorten = 0.5
+    opt.remember('xc')
+    # Data misfit
+    dmis = simpeg.DataMisfit.l2_DataMisfit(survey)
+    dmis.Wd = Wd
+    # Regularization - with a regularization mesh
+    regMesh = simpeg.Mesh.TensorMesh([m1d.hx[problem.mapping.sigmaMap.maps[-1].indActive]],m1d.x0)
+    reg = simpeg.Regularization.Tikhonov(regMesh)
+    reg.mrefInSmooth = True
+    reg.alpha_s = 1e-7
+    reg.alpha_x = 1.
+    # Inversion problem
+    invProb = simpeg.InvProblem.BaseInvProblem(dmis, reg, opt)
+    invProb.counter = C
+    # Beta cooling
+    beta = simpeg.Directives.BetaSchedule()
+    beta.coolingRate = 4
+    betaest = simpeg.Directives.BetaEstimate_ByEig(beta0_ratio=0.75)
+    targmis = simpeg.Directives.TargetMisfit()
+    targmis.target = survey.nD
+    saveModel = simpeg.Directives.SaveModelEveryIteration()
+    saveModel.fileName = 'Inversion_TargMisEqnD_smoothTrue'
+    # Create an inversion object
+    inv = simpeg.Inversion.BaseInversion(invProb, directiveList=[beta,betaest,targmis])
+
+    ## Run the inversion
+    mopt = inv.run(m_0)
+
+    if plotIt:
+        fig = MT.Utils.dataUtils.plotMT1DModelData(problem,[mopt])
+        fig.suptitle('Target - smooth true')
+        plt.show()
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/MT_3D_Foward.py

@@ -0,0 +1,64 @@
+# Test script to use SimPEG.MT platform to forward model synthetic data.
+
+# Import
+import SimPEG as simpeg
+from SimPEG import MT
+import numpy as np
+try:
+    from pymatsolver import MumpsSolver as Solver
+except:
+    from SimPEG import Solver
+
+def run(plotIt=True, nFreq=1):
+    """
+        MT: 3D: Forward
+        =======================
+
+        Forward model 3D MT data.
+
+    """
+
+    # Make a mesh
+    M = simpeg.Mesh.TensorMesh([[(100,5,-1.5),(100.,10),(100,5,1.5)],[(100,5,-1.5),(100.,10),(100,5,1.5)],[(100,5,1.6),(100.,10),(100,3,2)]], x0=['C','C',-3529.5360])
+    # Setup the model
+    conds = [1e-2,1]
+    sig = simpeg.Utils.ModelBuilder.defineBlock(M.gridCC,[-1000,-1000,-400],[1000,1000,-200],conds)
+    sig[M.gridCC[:,2]>0] = 1e-8
+    sig[M.gridCC[:,2]<-600] = 1e-1
+    sigBG = np.zeros(M.nC) + conds[0]
+    sigBG[M.gridCC[:,2]>0] = 1e-8
+
+    ## Setup the the survey object
+    # Receiver locations
+    rx_x, rx_y = np.meshgrid(np.arange(-500,501,50),np.arange(-500,501,50))
+    rx_loc = np.hstack((simpeg.Utils.mkvc(rx_x,2),simpeg.Utils.mkvc(rx_y,2),np.zeros((np.prod(rx_x.shape),1))))
+    # Make a receiver list
+    rxList = []
+    for loc in rx_loc:
+        # NOTE: loc has to be a (1,3) np.ndarray otherwise errors accure
+        for rxType in ['zxxr','zxxi','zxyr','zxyi','zyxr','zyxi','zyyr','zyyi','tzxr','tzxi','tzyr','tzyi']:
+            rxList.append(MT.Rx(simpeg.mkvc(loc,2).T,rxType))
+    # Source list
+    srcList =[]
+    for freq in np.logspace(3,-3,nFreq):
+        srcList.append(MT.SrcMT.polxy_1Dprimary(rxList,freq))
+    # Survey MT
+    survey = MT.Survey(srcList)
+
+    ## Setup the problem object
+    problem = MT.Problem3D.eForm_ps(M, sigmaPrimary=sigBG)
+    problem.pair(survey)
+    problem.Solver = Solver
+
+    # Calculate the data
+    fields = problem.fields(sig)
+    dataVec = survey.eval(fields)
+
+    # Make the data
+    mtData = MT.Data(survey,dataVec)
+    # Add plots
+    if plotIt:
+        pass
+
+if __name__ == '__main__':
+    run()

SimPEG/Examples/Utils_surface2ind_topo.py

@@ -0,0 +1,41 @@
+from SimPEG import *
+from SimPEG.Utils import surface2ind_topo
+
+
+def run(plotIt=False, nx = 5, ny = 5):
+    """
+        Here we show how to use :code:`Utils.surface2ind_topo` to identify cells below
+        a topographic surface.
+
+    """
+
+    mesh = Mesh.TensorMesh([nx,ny], x0='CC') # 2D mesh
+    xtopo = np.linspace(mesh.gridN[:,0].min(), mesh.gridN[:,0].max())
+    topo = 0.4*np.sin(xtopo*5) # define a topographic surface
+
+    Topo = np.hstack([Utils.mkvc(xtopo,2),Utils.mkvc(topo,2)]) #make it an array
+
+    indcc = surface2ind_topo(mesh, Topo,'CC')
+
+    if plotIt:
+        from matplotlib.pylab import plt
+        from scipy.interpolate import interp1d
+        fig, ax = plt.subplots(1,1,figsize=(6,6))
+        mesh.plotGrid(ax=ax, nodes=True, centers=True)
+        ax.plot(xtopo,topo,'k',linewidth=1)
+        # ax.plot(mesh.vectorNx, interp1d(xtopo,topo)(mesh.vectorNx),'--k',linewidth=3)
+        ax.plot(mesh.vectorCCx, interp1d(xtopo,topo)(mesh.vectorCCx),'--k',linewidth=3)
+
+
+        aveN2CC = Utils.sdiag(mesh.aveN2CC.T.sum(1))*mesh.aveN2CC.T
+        a = aveN2CC * indcc
+        a[a > 0] = 1.
+        a[a < 0.25] = np.nan
+        a = a.reshape(mesh.vnN, order='F')
+        masked_array = np.ma.array(a, mask=np.isnan(a))
+        ax.pcolor(mesh.vectorNx,mesh.vectorNy,masked_array.T, cmap = plt.cm.gray,alpha=0.2)
+        plt.show()
+
+
+if __name__ == '__main__':
+    run(plotIt=True)

SimPEG/Examples/__init__.py

@@ -1,9 +1,15 @@
 # Run this file to add imports.
 
 ##### AUTOIMPORTS #####
+import DC_Analytic_Dipole
+import DC_Forward_PseudoSection
 import EM_FDEM_1D_Inversion
+import EM_FDEM_Analytic_MagDipoleWholespace
+import EM_Schenkel_Morrison_Casing
+import EM_TDEM_1D_Inversion
 import FLOW_Richards_1D_Celia1990
 import Forward_BasicDirectCurrent
+import Inversion_IRLS
 import Inversion_Linear
 import Mesh_Basic_PlotImage
 import Mesh_Basic_Types
@@ -12,8 +18,11 @@ import Mesh_QuadTree_Creation
 import Mesh_QuadTree_FaceDiv
 import Mesh_QuadTree_HangingNodes
 import Mesh_Tensor_Creation
+import MT_1D_ForwardAndInversion
+import MT_3D_Foward
+import Utils_surface2ind_topo
 
-__examples__ = ["EM_FDEM_1D_Inversion", "FLOW_Richards_1D_Celia1990", "Forward_BasicDirectCurrent", "Inversion_Linear", "Mesh_Basic_PlotImage", "Mesh_Basic_Types", "Mesh_Operators_CahnHilliard", "Mesh_QuadTree_Creation", "Mesh_QuadTree_FaceDiv", "Mesh_QuadTree_HangingNodes", "Mesh_Tensor_Creation"]
+__examples__ = ["DC_Analytic_Dipole", "DC_Forward_PseudoSection", "EM_FDEM_1D_Inversion", "EM_FDEM_Analytic_MagDipoleWholespace", "EM_Schenkel_Morrison_Casing", "EM_TDEM_1D_Inversion", "FLOW_Richards_1D_Celia1990", "Forward_BasicDirectCurrent", "Inversion_IRLS", "Inversion_Linear", "Mesh_Basic_PlotImage", "Mesh_Basic_Types", "Mesh_Operators_CahnHilliard", "Mesh_QuadTree_Creation", "Mesh_QuadTree_FaceDiv", "Mesh_QuadTree_HangingNodes", "Mesh_Tensor_Creation", "MT_1D_ForwardAndInversion", "MT_3D_Foward", "Utils_surface2ind_topo"]
 
 ##### AUTOIMPORTS #####
 
@@ -28,16 +37,17 @@ if __name__ == '__main__':
     from SimPEG import Examples
 
     # Create the examples dir in the docs folder.
-    docExamplesDir = os.path.sep.join(os.path.realpath(__file__).split(os.path.sep)[:-3] + ['docs', 'examples'])
+    fName = os.path.realpath(__file__)
+    docExamplesDir = os.path.sep.join(fName.split(os.path.sep)[:-3] + ['docs', 'examples'])
     shutil.rmtree(docExamplesDir)
     os.makedirs(docExamplesDir)
 
     # Get all the python examples in this folder
-    thispath = os.path.sep.join(__file__.split(os.path.sep)[:-1])
+    thispath = os.path.sep.join(fName.split(os.path.sep)[:-1])
     exfiles  = [f[:-3] for f in os.listdir(thispath) if os.path.isfile(os.path.join(thispath, f)) and f.endswith('.py') and not f.startswith('_')]
 
     # Add the imports to the top in the AUTOIMPORTS section
-    f = file(__file__, 'r')
+    f = file(fName, 'r')
     inimports = False
     out = ''
     for line in f:
@@ -52,7 +62,7 @@ if __name__ == '__main__':
                 out += '\n##### AUTOIMPORTS #####\n'
     f.close()
 
-    f = file(__file__, 'w')
+    f = file(fName, 'w')
     f.write(out)
     f.close()
 

SimPEG/FLOW/Richards/RichardsProblem.py

@@ -8,7 +8,7 @@ class RichardsRx(Survey.BaseTimeRx):
 
     knownRxTypes = ['saturation','pressureHead']
 
-    def projectFields(self, U, m, mapping, mesh, timeMesh):
+    def eval(self, U, m, mapping, mesh, timeMesh):
 
         if self.rxType == 'pressureHead':
             u = np.concatenate(U)
@@ -17,7 +17,7 @@ class RichardsRx(Survey.BaseTimeRx):
 
         return self.getP(mesh, timeMesh) * u
 
-    def projectFieldsDeriv(self, U, m, mapping, mesh, timeMesh):
+    def evalDeriv(self, U, m, mapping, mesh, timeMesh):
 
         P = self.getP(mesh, timeMesh)
         if self.rxType == 'pressureHead':
@@ -45,25 +45,25 @@ class RichardsSurvey(Survey.BaseSurvey):
 
     @Utils.count
     @Utils.requires('prob')
-    def dpred(self, m, u=None):
+    def dpred(self, m, f=None):
         """
             Create the projected data from a model.
-            The field, u, (if provided) will be used for the predicted data
+            The field, f, (if provided) will be used for the predicted data
             instead of recalculating the fields (which may be expensive!).
 
             .. math::
-                d_\\text{pred} = P(u(m), m)
+                d_\\text{pred} = P(f(m), m)
 
             Where P is a projection of the fields onto the data space.
         """
-        if u is None: u = self.prob.fields(m)
-        return Utils.mkvc(self.projectFields(u, m))
+        if f is None: f = self.prob.fields(m)
+        return Utils.mkvc(self.eval(f, m))
 
     @Utils.requires('prob')
-    def projectFields(self, U, m):
+    def eval(self, U, m):
         Ds = range(len(self.rxList))
         for ii, rx in enumerate(self.rxList):
-            Ds[ii] = rx.projectFields(U, m,
+            Ds[ii] = rx.eval(U, m,
                                 self.prob.mapping,
                                 self.prob.mesh,
                                 self.prob.timeMesh)
@@ -71,11 +71,11 @@ class RichardsSurvey(Survey.BaseSurvey):
         return np.concatenate(Ds)
 
     @Utils.requires('prob')
-    def projectFieldsDeriv(self, U, m):
+    def evalDeriv(self, U, m):
         """The Derivative with respect to the fields."""
         Ds = range(len(self.rxList))
         for ii, rx in enumerate(self.rxList):
-            Ds[ii] = rx.projectFieldsDeriv(U, m,
+            Ds[ii] = rx.evalDeriv(U, m,
                                 self.prob.mapping,
                                 self.prob.mesh,
                                 self.prob.timeMesh)
@@ -233,16 +233,16 @@ class RichardsProblem(Problem.BaseTimeProblem):
         return r, J
 
     @Utils.timeIt
-    def Jfull(self, m, u=None):
-        if u is None:
-            u = self.fields(m)
+    def Jfull(self, m, f=None):
+        if f is None:
+            f = self.fields(m)
 
-        nn = len(u)-1
+        nn = len(f)-1
         Asubs, Adiags, Bs = range(nn), range(nn), range(nn)
         for ii in range(nn):
             dt = self.timeSteps[ii]
-            bc = self.getBoundaryConditions(ii, u[ii])
-            Asubs[ii], Adiags[ii], Bs[ii] = self.diagsJacobian(m, u[ii], u[ii+1], dt, bc)
+            bc = self.getBoundaryConditions(ii, f[ii])
+            Asubs[ii], Adiags[ii], Bs[ii] = self.diagsJacobian(m, f[ii], f[ii+1], dt, bc)
         Ad = sp.block_diag(Adiags)
         zRight = Utils.spzeros((len(Asubs)-1)*Asubs[0].shape[0],Adiags[0].shape[1])
         zTop = Utils.spzeros(Adiags[0].shape[0], len(Adiags)*Adiags[0].shape[1])
@@ -251,7 +251,7 @@ class RichardsProblem(Problem.BaseTimeProblem):
         B = np.array(sp.vstack(Bs).todense())
 
         Ainv = self.Solver(A, **self.solverOpts)
-        P = self.survey.projectFieldsDeriv(u, m)
+        P = self.survey.evalDeriv(f, m)
         AinvB = Ainv * B
         z = np.zeros((self.mesh.nC, B.shape[1]))
         zAinvB = np.vstack((z, AinvB))
@@ -259,41 +259,41 @@ class RichardsProblem(Problem.BaseTimeProblem):
         return J
 
     @Utils.timeIt
-    def Jvec(self, m, v, u=None):
-        if u is None:
-            u = self.fields(m)
+    def Jvec(self, m, v, f=None):
+        if f is None:
+            f = self.fields(m)
 
-        JvC = range(len(u)-1) # Cell to hold each row of the long vector.
+        JvC = range(len(f)-1) # Cell to hold each row of the long vector.
 
         # This is done via forward substitution.
-        bc = self.getBoundaryConditions(0, u[0])
-        temp, Adiag, B = self.diagsJacobian(m, u[0], u[1], self.timeSteps[0], bc)
+        bc = self.getBoundaryConditions(0, f[0])
+        temp, Adiag, B = self.diagsJacobian(m, f[0], f[1], self.timeSteps[0], bc)
         Adiaginv = self.Solver(Adiag, **self.solverOpts)
         JvC[0] = Adiaginv * (B*v)
 
-        for ii in range(1,len(u)-1):
-            bc = self.getBoundaryConditions(ii, u[ii])
-            Asub, Adiag, B = self.diagsJacobian(m, u[ii], u[ii+1], self.timeSteps[ii], bc)
+        for ii in range(1,len(f)-1):
+            bc = self.getBoundaryConditions(ii, f[ii])
+            Asub, Adiag, B = self.diagsJacobian(m, f[ii], f[ii+1], self.timeSteps[ii], bc)
             Adiaginv = self.Solver(Adiag, **self.solverOpts)
             JvC[ii] = Adiaginv * (B*v - Asub*JvC[ii-1])
 
-        P = self.survey.projectFieldsDeriv(u, m)
+        P = self.survey.evalDeriv(f, m)
         return P * np.concatenate([np.zeros(self.mesh.nC)] + JvC)
 
     @Utils.timeIt
-    def Jtvec(self, m, v, u=None):
-        if u is None:
-            u = self.field(m)
+    def Jtvec(self, m, v, f=None):
+        if f is None:
+            f = self.field(m)
 
-        P = self.survey.projectFieldsDeriv(u, m)
+        P = self.survey.evalDeriv(f, m)
         PTv = P.T*v
 
         # This is done via backward substitution.
         minus = 0
         BJtv = 0
-        for ii in range(len(u)-1,0,-1):
-            bc = self.getBoundaryConditions(ii-1, u[ii-1])
-            Asub, Adiag, B = self.diagsJacobian(m, u[ii-1], u[ii], self.timeSteps[ii-1], bc)
+        for ii in range(len(f)-1,0,-1):
+            bc = self.getBoundaryConditions(ii-1, f[ii-1])
+            Asub, Adiag, B = self.diagsJacobian(m, f[ii-1], f[ii], self.timeSteps[ii-1], bc)
             #select the correct part of v
             vpart = range((ii)*Adiag.shape[0], (ii+1)*Adiag.shape[0])
             AdiaginvT = self.Solver(Adiag.T, **self.solverOpts)

SimPEG/InvProblem.py

@@ -66,8 +66,8 @@ class BaseInvProblem(object):
         self.curModel = m0
 
         print """SimPEG.InvProblem is setting bfgsH0 to the inverse of the eval2Deriv.
-                    ***Done using same solver as the problem***"""
-        self.opt.bfgsH0 = self.prob.Solver(self.reg.eval2Deriv(self.curModel))
+                    ***Done using same Solver and solverOpts as the problem***"""
+        self.opt.bfgsH0 = self.prob.Solver(self.reg.eval2Deriv(self.curModel), **self.prob.solverOpts)
 
     @property
     def warmstart(self):
@@ -82,23 +82,23 @@ class BaseInvProblem(object):
         self._warmstart = value
 
     def getFields(self, m, store=False, deleteWarmstart=True):
-        u = None
+        f = None
 
         for mtest, u_ofmtest in self.warmstart:
             if m is mtest:
-                u = u_ofmtest
+                f = u_ofmtest
                 if self.debug: print 'InvProb is Warm Starting!'
                 break
 
-        if u is None:
-            u = self.prob.fields(m)
+        if f is None:
+            f = self.prob.fields(m)
 
         if deleteWarmstart:
             self.warmstart = []
         if store:
-            self.warmstart += [(m,u)]
+            self.warmstart += [(m,f)]
 
-        return u
+        return f
 
     @Utils.timeIt
     def evalFunction(self, m, return_g=True, return_H=True):
@@ -109,21 +109,21 @@ class BaseInvProblem(object):
         gc.collect()
 
         # Store fields if doing a line-search
-        u = self.getFields(m, store=(return_g==False and return_H==False))
+        f = self.getFields(m, store=(return_g==False and return_H==False))
 
-        phi_d = self.dmisfit.eval(m, u=u)
+        phi_d = self.dmisfit.eval(m, f=f)
         phi_m = self.reg.eval(m)
 
-        self.dpred = self.survey.dpred(m, u=u)  # This is a cheap matrix vector calculation.
+        self.dpred = self.survey.dpred(m, f=f)  # This is a cheap matrix vector calculation.
 
         self.phi_d, self.phi_d_last  = phi_d, self.phi_d
         self.phi_m, self.phi_m_last  = phi_m, self.phi_m
 
-        f = phi_d + self.beta * phi_m
+        phi = phi_d + self.beta * phi_m
 
-        out = (f,)
+        out = (phi,)
         if return_g:
-            phi_dDeriv = self.dmisfit.evalDeriv(m, u=u)
+            phi_dDeriv = self.dmisfit.evalDeriv(m, f=f)
             phi_mDeriv = self.reg.evalDeriv(m)
 
             g = phi_dDeriv + self.beta * phi_mDeriv
@@ -131,7 +131,7 @@ class BaseInvProblem(object):
 
         if return_H:
             def H_fun(v):
-                phi_d2Deriv = self.dmisfit.eval2Deriv(m, v, u=u)
+                phi_d2Deriv = self.dmisfit.eval2Deriv(m, v, f=f)
                 phi_m2Deriv = self.reg.eval2Deriv(m, v=v)
 
                 return phi_d2Deriv + self.beta * phi_m2Deriv

SimPEG/Inversion.py

@@ -33,7 +33,9 @@ class BaseInversion(object):
         self._directiveList = value
         self._directiveList.inversion = self
 
-    def __init__(self, invProb, directiveList=[], **kwargs):
+    def __init__(self, invProb, directiveList=None, **kwargs):
+        if directiveList is None:
+            directiveList = []
         self.directiveList = directiveList
         Utils.setKwargs(self, **kwargs)
 

SimPEG/MT/BaseMT.py

@@ -0,0 +1,132 @@
+from SimPEG import SolverLU as SimpegSolver, PropMaps, Utils, mkvc, sp, np
+from SimPEG.EM.FDEM.ProblemFDEM import BaseFDEMProblem
+from SurveyMT import Survey, Data
+from FieldsMT import BaseMTFields
+
+
+class BaseMTProblem(BaseFDEMProblem):
+    """
+        Base class for all Natural source problems.
+    """
+
+    def __init__(self, mesh, **kwargs):
+        BaseFDEMProblem.__init__(self, mesh, **kwargs)
+        Utils.setKwargs(self, **kwargs)
+    # Set the default pairs of the problem
+    surveyPair = Survey
+    dataPair = Data
+    fieldsPair = BaseMTFields
+
+    # Set the solver
+    Solver = SimpegSolver
+    solverOpts = {}
+
+    verbose = False
+    # Notes:
+    # Use the forward and devs from BaseFDEMProblem
+    # Might need to add more stuff here.
+
+    ## NEED to clean up the Jvec and Jtvec to use Zero and Identities for None components.
+    def Jvec(self, m, v, f=None):
+        """
+        Function to calculate the data sensitivities dD/dm times a vector.
+
+            :param numpy.ndarray m (nC, 1) - conductive model
+            :param numpy.ndarray v (nC, 1) - random vector
+            :param MTfields object (optional) - MT fields object, if not given it is calculated
+            :rtype: MTdata object
+            :return: Data sensitivities wrt m
+        """
+
+        # Calculate the fields
+        if f is None:
+           f= self.fields(m)
+        # Set current model
+        self.curModel = m
+        # Initiate the Jv object
+        Jv = self.dataPair(self.survey)
+
+        # Loop all the frequenies
+        for freq in self.survey.freqs:
+            dA_du = self.getA(freq) #
+
+            dA_duI = self.Solver(dA_du, **self.solverOpts)
+
+            for src in self.survey.getSrcByFreq(freq):
+                # We need fDeriv_m = df/du*du/dm + df/dm
+                # Construct du/dm, it requires a solve
+                # NOTE: need to account for the 2 polarizations in the derivatives.
+                f_src = f[src,:]
+                # dA_dm and dRHS_dm should be of size nE,2, so that we can multiply by dA_duI. The 2 columns are each of the polarizations.
+                dA_dm = self.getADeriv_m(freq, f_src, v) # Size: nE,2 (u_px,u_py) in the columns.
+                dRHS_dm = self.getRHSDeriv_m(freq, v) # Size: nE,2 (u_px,u_py) in the columns.
+                if dRHS_dm is None:
+                    du_dm = dA_duI * ( -dA_dm )
+                else:
+                    du_dm = dA_duI * ( -dA_dm + dRHS_dm )
+                # Calculate the projection derivatives
+                for rx in src.rxList:
+                    # Get the projection derivative
+                    # v should be of size 2*nE (for 2 polarizations)
+                    PDeriv_u = lambda t: rx.evalDeriv(src, self.mesh, f, t) # wrt u, we don't have have PDeriv wrt m
+                    Jv[src, rx] = PDeriv_u(mkvc(du_dm))
+            dA_duI.clean()
+        # Return the vectorized sensitivities
+        return mkvc(Jv)
+
+    def Jtvec(self, m, v, f=None):
+        """
+        Function to calculate the transpose of the data sensitivities (dD/dm)^T times a vector.
+
+            :param numpy.ndarray m (nC, 1) - conductive model
+            :param numpy.ndarray v (nD, 1) - vector
+            :param MTfields object u (optional) - MT fields object, if not given it is calculated
+            :rtype: MTdata object
+            :return: Data sensitivities wrt m
+        """
+
+        if f is None:
+            f = self.fields(m)
+
+        self.curModel = m
+
+        # Ensure v is a data object.
+        if not isinstance(v, self.dataPair):
+            v = self.dataPair(self.survey, v)
+
+        Jtv = np.zeros(m.size)
+
+        for freq in self.survey.freqs:
+            AT = self.getA(freq).T
+
+            ATinv = self.Solver(AT, **self.solverOpts)
+
+            for src in self.survey.getSrcByFreq(freq):
+                ftype = self._fieldType + 'Solution'
+                f_src = f[src, :]
+
+                for rx in src.rxList:
+                    # Get the adjoint evalDeriv
+                    # PTv needs to be nE,
+                    PTv = rx.evalDeriv(src, self.mesh, f, mkvc(v[src, rx],2), adjoint=True) # wrt u, need possibility wrt m
+                    # Get the
+                    dA_duIT = ATinv * PTv
+                    dA_dmT = self.getADeriv_m(freq, f_src, mkvc(dA_duIT), adjoint=True)
+                    dRHS_dmT = self.getRHSDeriv_m(freq, mkvc(dA_duIT), adjoint=True)
+                    # Make du_dmT
+                    if dRHS_dmT is None:
+                        du_dmT = -dA_dmT
+                    else:
+                        du_dmT = -dA_dmT + dRHS_dmT
+                    # Select the correct component
+                    # du_dmT needs to be of size nC,
+                    real_or_imag = rx.projComp
+                    if real_or_imag == 'real':
+                        Jtv +=  du_dmT.real
+                    elif real_or_imag == 'imag':
+                        Jtv +=  -du_dmT.real
+                    else:
+                        raise Exception('Must be real or imag')
+            # Clean the factorization, clear memory.
+            ATinv.clean()
+        return Jtv

SimPEG/MT/FieldsMT.py

@@ -0,0 +1,351 @@
+from SimPEG import Survey, Utils, Problem, np, sp, mkvc
+from scipy.constants import mu_0
+import sys
+from numpy.lib import recfunctions as recFunc
+from SimPEG.EM.Utils import omega
+
+##############
+### Fields ###
+##############
+class BaseMTFields(Problem.Fields):
+    """Field Storage for a MT survey."""
+    knownFields = {}
+    dtype = complex
+
+
+class Fields1D_e(BaseMTFields):
+    """
+    Fields storage for the 1D MT solution.
+    """
+    knownFields = {'e_1dSolution':'F'}
+    aliasFields = {
+                    'e_1d' : ['e_1dSolution','F','_e'],
+                    'e_1dPrimary' : ['e_1dSolution','F','_ePrimary'],
+                    'e_1dSecondary' : ['e_1dSolution','F','_eSecondary'],
+                    'b_1d' : ['e_1dSolution','E','_b'],
+                    'b_1dPrimary' : ['e_1dSolution','E','_bPrimary'],
+                    'b_1dSecondary' : ['e_1dSolution','E','_bSecondary']
+                  }
+
+    def __init__(self,mesh,survey,**kwargs):
+        BaseMTFields.__init__(self,mesh,survey,**kwargs)
+
+    def _ePrimary(self, eSolution, srcList):
+        ePrimary = np.zeros_like(eSolution)
+        for i, src in enumerate(srcList):
+            ep = src.ePrimary(self.survey.prob)
+            if ep is not None:
+                ePrimary[:,i] = ep[:,-1]
+        return ePrimary
+
+    def _eSecondary(self, eSolution, srcList):
+        return eSolution
+
+    def _e(self, eSolution, srcList):
+        return self._ePrimary(eSolution,srcList) + self._eSecondary(eSolution,srcList)
+
+    def _eDeriv_u(self, src, v, adjoint = False):
+        return v
+
+    def _eDeriv_m(self, src, v, adjoint = False):
+        # assuming primary does not depend on the model
+        return None
+
+    def _bPrimary(self, eSolution, srcList):
+        bPrimary = np.zeros([self.survey.mesh.nE,eSolution.shape[1]], dtype = complex)
+        for i, src in enumerate(srcList):
+            bp = src.bPrimary(self.survey.prob)
+            if bp is not None:
+                bPrimary[:,i] += bp[:,-1]
+        return bPrimary
+
+    def _bSecondary(self, eSolution, srcList):
+        C = self.mesh.nodalGrad
+        b = (C * eSolution)
+        for i, src in enumerate(srcList):
+            b[:,i] *= - 1./(1j*omega(src.freq))
+            # There is no magnetic source in the MT problem
+            # S_m, _ = src.eval(self.survey.prob)
+            # if S_m is not None:
+            #     b[:,i] += 1./(1j*omega(src.freq)) * S_m
+        return b
+
+    def _b(self, eSolution, srcList):
+        return self._bPrimary(eSolution, srcList) + self._bSecondary(eSolution, srcList)
+
+    def _bSecondaryDeriv_u(self, src, v, adjoint = False):
+        C = self.mesh.nodalGrad
+        if adjoint:
+            return - 1./(1j*omega(src.freq)) * (C.T * v)
+        return - 1./(1j*omega(src.freq)) * (C * v)
+
+    def _bSecondaryDeriv_m(self, src, v, adjoint = False):
+        # Doesn't depend on m
+        # _, S_eDeriv = src.evalDeriv(self.survey.prob, adjoint)
+        # S_eDeriv = S_eDeriv(v)
+        # if S_eDeriv is not None:
+        #     return 1./(1j * omega(src.freq)) * S_eDeriv
+        return None
+
+    def _bDeriv_u(self, src, v, adjoint=False):
+        # Primary does not depend on u
+        return self._bSecondaryDeriv_u(src, v, adjoint)
+
+    def _bDeriv_m(self, src, v, adjoint=False):
+        # Assuming the primary does not depend on the model
+        return self._bSecondaryDeriv_m(src, v, adjoint)
+
+    def _fDeriv_u(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt u.
+
+        :param MTsrc src: MT source
+        :param numpy.ndarray v: random vector of f_sol.size
+        This function stacks the fields derivatives appropriately
+
+        return a vector of size (nreEle+nrbEle)
+        """
+
+        de_du = v #Utils.spdiag(np.ones((self.nF,)))
+        db_du = self._bDeriv_u(src, v, adjoint)
+        # Return the stack
+        # This doesn't work...
+        return np.vstack((de_du,db_du))
+
+    def _fDeriv_m(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt m.
+
+        This function stacks the fields derivatives appropriately
+        """
+        return None
+
+class Fields3D_e(BaseMTFields):
+    """
+    Fields storage for the 3D MT solution. Labels polarizations by px and py.
+
+        :param SimPEG object mesh: The solution mesh
+        :param SimPEG object survey: A survey object
+    """
+    # Define the known the alias fields
+    # Assume that the solution of e on the E.
+    ## NOTE: Need to make this more general, to allow for other solutions formats.
+    knownFields = {'e_pxSolution':'E','e_pySolution':'E'}
+    aliasFields = {
+                    'e_px' : ['e_pxSolution','E','_e_px'],
+                    'e_pxPrimary' : ['e_pxSolution','E','_e_pxPrimary'],
+                    'e_pxSecondary' : ['e_pxSolution','E','_e_pxSecondary'],
+                    'e_py' : ['e_pySolution','E','_e_py'],
+                    'e_pyPrimary' : ['e_pySolution','E','_e_pyPrimary'],
+                    'e_pySecondary' : ['e_pySolution','E','_e_pySecondary'],
+                    'b_px' : ['e_pxSolution','F','_b_px'],
+                    'b_pxPrimary' : ['e_pxSolution','F','_b_pxPrimary'],
+                    'b_pxSecondary' : ['e_pxSolution','F','_b_pxSecondary'],
+                    'b_py' : ['e_pySolution','F','_b_py'],
+                    'b_pyPrimary' : ['e_pySolution','F','_b_pyPrimary'],
+                    'b_pySecondary' : ['e_pySolution','F','_b_pySecondary']
+                  }
+
+    def __init__(self,mesh,survey,**kwargs):
+        BaseMTFields.__init__(self,mesh,survey,**kwargs)
+
+    def _e_pxPrimary(self, e_pxSolution, srcList):
+        e_pxPrimary = np.zeros_like(e_pxSolution)
+        for i, src in enumerate(srcList):
+            ep = src.ePrimary(self.survey.prob)
+            if ep is not None:
+                e_pxPrimary[:,i] = ep[:,0]
+        return e_pxPrimary
+
+    def _e_pyPrimary(self, e_pySolution, srcList):
+        e_pyPrimary = np.zeros_like(e_pySolution)
+        for i, src in enumerate(srcList):
+            ep = src.ePrimary(self.survey.prob)
+            if ep is not None:
+                e_pyPrimary[:,i] = ep[:,1]
+        return e_pyPrimary
+
+    def _e_pxSecondary(self, e_pxSolution, srcList):
+        return e_pxSolution
+
+    def _e_pySecondary(self, e_pySolution, srcList):
+        return e_pySolution
+
+    def _e_px(self, e_pxSolution, srcList):
+        return self._e_pxPrimary(e_pxSolution,srcList) + self._e_pxSecondary(e_pxSolution,srcList)
+
+    def _e_py(self, e_pySolution, srcList):
+        return self._e_pyPrimary(e_pySolution,srcList) + self._e_pySecondary(e_pySolution,srcList)
+
+    #NOTE: For e_p?Deriv_u,
+    # v has to be u(2*nE) long for the not adjoint and nE long for adjoint.
+    # Returns nE long for not adjoint and 2*nE long for adjoint
+    def _e_pxDeriv_u(self, src, v, adjoint = False):
+        '''
+        Takes the derivative of e_px wrt u
+        '''
+        if adjoint:
+            # adjoint: returns a 2*nE long vector with zero's for py
+            return np.vstack((v,np.zeros_like(v)))
+        # Not adjoint: return only the px part of the vector
+        return v[:len(v)/2]
+
+    def _e_pyDeriv_u(self, src, v, adjoint = False):
+        '''
+        Takes the derivative of e_py wrt u
+        '''
+        if adjoint:
+            # adjoint: returns a 2*nE long vector with zero's for px
+            return np.vstack((np.zeros_like(v),v))
+        # Not adjoint: return only the px part of the vector
+        return v[len(v)/2::]
+
+    def _e_pxDeriv_m(self, src, v, adjoint = False):
+        # assuming primary does not depend on the model
+        return None
+    def _e_pyDeriv_m(self, src, v, adjoint = False):
+        # assuming primary does not depend on the model
+        return None
+
+    def _b_pxPrimary(self, e_pxSolution, srcList):
+        b_pxPrimary = np.zeros([self.survey.mesh.nF,e_pxSolution.shape[1]], dtype = complex)
+        for i, src in enumerate(srcList):
+            bp = src.bPrimary(self.survey.prob)
+            if bp is not None:
+                b_pxPrimary[:,i] += bp[:,0]
+        return b_pxPrimary
+
+    def _b_pyPrimary(self, e_pySolution, srcList):
+        b_pyPrimary = np.zeros([self.survey.mesh.nF,e_pySolution.shape[1]], dtype = complex)
+        for i, src in enumerate(srcList):
+            bp = src.bPrimary(self.survey.prob)
+            if bp is not None:
+                b_pyPrimary[:,i] += bp[:,1]
+        return b_pyPrimary
+
+    def _b_pxSecondary(self, e_pxSolution, srcList):
+        C = self.mesh.edgeCurl
+        b = (C * e_pxSolution)
+        for i, src in enumerate(srcList):
+            b[:,i] *= - 1./(1j*omega(src.freq))
+            # There is no magnetic source in the MT problem
+            # S_m, _ = src.eval(self.survey.prob)
+            # if S_m is not None:
+            #     b[:,i] += 1./(1j*omega(src.freq)) * S_m
+        return b
+
+    def _b_pySecondary(self, e_pySolution, srcList):
+        C = self.mesh.edgeCurl
+        b = (C * e_pySolution)
+        for i, src in enumerate(srcList):
+            b[:,i] *= - 1./(1j*omega(src.freq))
+            # There is no magnetic source in the MT problem
+            # S_m, _ = src.eval(self.survey.prob)
+            # if S_m is not None:
+            #     b[:,i] += 1./(1j*omega(src.freq)) * S_m
+        return b
+
+    def _b_px(self, eSolution, srcList):
+        return self._b_pxPrimary(eSolution, srcList) + self._b_pxSecondary(eSolution, srcList)
+
+    def _b_py(self, eSolution, srcList):
+        return self._b_pyPrimary(eSolution, srcList) + self._b_pySecondary(eSolution, srcList)
+
+    # NOTE: v needs to be length 2*nE to account for both polarizations
+    def _b_pxSecondaryDeriv_u(self, src, v, adjoint = False):
+        # C = sp.kron(self.mesh.edgeCurl,[[1,0],[0,0]])
+        C = sp.hstack((self.mesh.edgeCurl,Utils.spzeros(self.mesh.nF,self.mesh.nE))) # This works for adjoint = None
+        if adjoint:
+            return - 1./(1j*omega(src.freq)) * (C.T * v)
+        return - 1./(1j*omega(src.freq)) * (C * v)
+
+    def _b_pySecondaryDeriv_u(self, src, v, adjoint = False):
+        # C = sp.kron(self.mesh.edgeCurl,[[0,0],[0,1]])
+        C = sp.hstack((Utils.spzeros(self.mesh.nF,self.mesh.nE),self.mesh.edgeCurl)) # This works for adjoint = None
+        if adjoint:
+            return - 1./(1j*omega(src.freq)) * (C.T * v)
+        return - 1./(1j*omega(src.freq)) * (C * v)
+
+    def _b_pxSecondaryDeriv_m(self, src, v, adjoint = False):
+        # Doesn't depend on m
+        # _, S_eDeriv = src.evalDeriv(self.survey.prob, adjoint)
+        # S_eDeriv = S_eDeriv(v)
+        # if S_eDeriv is not None:
+        #     return 1./(1j * omega(src.freq)) * S_eDeriv
+        return None
+
+    def _b_pySecondaryDeriv_m(self, src, v, adjoint = False):
+        # Doesn't depend on m
+        # _, S_eDeriv = src.evalDeriv(self.survey.prob, adjoint)
+        # S_eDeriv = S_eDeriv(v)
+        # if S_eDeriv is not None:
+        #     return 1./(1j * omega(src.freq)) * S_eDeriv
+        return None
+
+    def _b_pxDeriv_u(self, src, v, adjoint=False):
+        # Primary does not depend on u
+        return self._b_pxSecondaryDeriv_u(src, v, adjoint)
+
+    def _b_pyDeriv_u(self, src, v, adjoint=False):
+        # Primary does not depend on u
+        return self._b_pySecondaryDeriv_u(src, v, adjoint)
+
+    def _b_pxDeriv_m(self, src, v, adjoint=False):
+        # Assuming the primary does not depend on the model
+        return self._b_pxSecondaryDeriv_m(src, v, adjoint)
+
+    def _b_pyDeriv_m(self, src, v, adjoint=False):
+        # Assuming the primary does not depend on the model
+        return self._b_pySecondaryDeriv_m(src, v, adjoint)
+
+    def _f_pxDeriv_u(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt u.
+
+        :param MTsrc src: MT source
+        :param numpy.ndarray v: random vector of f_sol.size
+        This function stacks the fields derivatives appropriately
+
+        return a vector of size (nreEle+nrbEle)
+        """
+
+        de_du = v #Utils.spdiag(np.ones((self.nF,)))
+        db_du = self._b_pxDeriv_u(src, v, adjoint)
+        # Return the stack
+        # This doesn't work...
+        return np.vstack((de_du,db_du))
+
+    def _f_pyDeriv_u(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt u.
+
+        :param MTsrc src: MT source
+        :param numpy.ndarray v: random vector of f_sol.size
+        This function stacks the fields derivatives appropriately
+
+        return a vector of size (nreEle+nrbEle)
+        """
+
+        de_du = v #Utils.spdiag(np.ones((self.nF,)))
+        db_du = self._b_pyDeriv_u(src, v, adjoint)
+        # Return the stack
+        # This doesn't work...
+        return np.vstack((de_du,db_du))
+
+    def _f_pxDeriv_m(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt m.
+
+        This function stacks the fields derivatives appropriately
+        """
+        # The fields have no dependance to the model.
+        return None
+
+    def _f_pyDeriv_m(self, src, v, adjoint=False):
+        """
+        Derivative of the fields object wrt m.
+
+        This function stacks the fields derivatives appropriately
+        """
+        # The fields have no dependance to the model.
+        return None

SimPEG/MT/Problem1D/Probs.py

@@ -0,0 +1,291 @@
+from SimPEG.EM.Utils import omega
+from SimPEG import mkvc
+from scipy.constants import mu_0
+from SimPEG.MT.BaseMT import BaseMTProblem
+from SimPEG.MT.SurveyMT import Survey, Data
+from SimPEG.MT.FieldsMT import Fields1D_e
+from SimPEG.MT.Utils.MT1Danalytic import getEHfields
+import numpy as np
+import multiprocessing, sys, time
+
+
+class eForm_psField(BaseMTProblem):
+    """
+    A MT problem soving a e formulation and primary/secondary fields decomposion.
+
+    By eliminating the magnetic flux density using
+
+        .. math ::
+
+            \mathbf{b} = \\frac{1}{i \omega}\\left(-\mathbf{C} \mathbf{e} \\right)
+
+
+    we can write Maxwell's equations as a second order system in \\\(\\\mathbf{e}\\\) only:
+
+    .. math ::
+        \\left(\mathbf{C}^T \mathbf{M^e_{\mu^{-1}}} \mathbf{C} + i \omega \mathbf{M^f_\sigma}] \mathbf{e}_{s} =& i \omega \mathbf{M^f_{\delta \sigma}} \mathbf{e}_{p}
+    which we solve for \\\(\\\mathbf{e_s}\\\). The total field \\\mathbf{e}\\ = \\\mathbf{e_p}\\ + \\\mathbf{e_s}\\.
+
+    The primary field is estimated from a background model (commonly half space ).
+
+
+    """
+    # From FDEMproblem: Used to project the fields. Currently not used for MTproblem.
+    _fieldType = 'e_1d'
+    _eqLocs    = 'EF'
+    _sigmaPrimary = None
+
+
+    def __init__(self, mesh, **kwargs):
+        BaseMTProblem.__init__(self, mesh, **kwargs)
+        self.fieldsPair = Fields1D_e
+        # self._sigmaPrimary = sigmaPrimary
+    @property
+    def MeMui(self):
+        """
+            Edge inner product matrix
+        """
+        if getattr(self, '_MeMui', None) is None:
+            self._MeMui = self.mesh.getEdgeInnerProduct(1.0/mu_0)
+        return self._MeMui
+
+    @property
+    def MfSigma(self):
+        """
+            Edge inner product matrix
+        """
+        if getattr(self, '_MfSigma', None) is None:
+            self._MfSigma = self.mesh.getFaceInnerProduct(self.curModel.sigma)
+        return self._MfSigma
+
+    @property
+    def sigmaPrimary(self):
+        """
+        A background model, use for the calculation of the primary fields.
+
+        """
+        return self._sigmaPrimary
+
+    @sigmaPrimary.setter
+    def sigmaPrimary(self, val):
+        # Note: TODO add logic for val, make sure it is the correct size.
+        self._sigmaPrimary = val
+
+    def getA(self, freq):
+        """
+            Function to get the A matrix.
+
+            :param float freq: Frequency
+            :rtype: scipy.sparse.csr_matrix
+            :return: A
+        """
+
+        # Note: need to use the code above since in the 1D problem I want
+        # e to live on Faces(nodes) and h on edges(cells). Might need to rethink this
+        # Possible that _fieldType and _eqLocs can fix this
+        MeMui = self.MeMui
+        MfSigma = self.MfSigma
+        C = self.mesh.nodalGrad
+        # Make A
+        A = C.T*MeMui*C + 1j*omega(freq)*MfSigma
+        # Either return full or only the inner part of A
+        return A
+
+    def getADeriv_m(self, freq, u, v, adjoint=False):
+        """
+        The derivative of A wrt sigma
+        """
+
+        dsig_dm = self.curModel.sigmaDeriv
+        MeMui = self.MeMui
+        #
+        u_src = u['e_1dSolution']
+        dMfSigma_dm = self.mesh.getFaceInnerProductDeriv(self.curModel.sigma)(u_src) * self.curModel.sigmaDeriv
+        if adjoint:
+            return 1j * omega(freq) * (  dMfSigma_dm.T * v )
+        # Note: output has to be nN/nF, not nC/nE.
+        # v should be nC
+        return 1j * omega(freq) * ( dMfSigma_dm * v )
+
+    def getRHS(self, freq):
+        """
+            Function to return the right hand side for the system.
+            :param float freq: Frequency
+            :rtype: numpy.ndarray (nF, 1), numpy.ndarray (nF, 1)
+            :return: RHS for 1 polarizations, primary fields
+        """
+
+        # Get sources for the frequncy(polarizations)
+        Src = self.survey.getSrcByFreq(freq)[0]
+        S_e = Src.S_e(self)
+        return -1j * omega(freq) * S_e
+
+    def getRHSDeriv_m(self, freq, v, adjoint=False):
+        """
+        The derivative of the RHS wrt sigma
+        """
+
+        Src = self.survey.getSrcByFreq(freq)[0]
+        S_eDeriv = Src.S_eDeriv_m(self, v, adjoint)
+        return -1j * omega(freq) * S_eDeriv
+
+    def fields(self, m):
+        '''
+        Function to calculate all the fields for the model m.
+
+        :param np.ndarray (nC,) m: Conductivity model
+        '''
+        # Set the current model
+        self.curModel = m
+
+        F = Fields1D_e(self.mesh, self.survey)
+        for freq in self.survey.freqs:
+            if self.verbose:
+                startTime = time.time()
+                print 'Starting work for {:.3e}'.format(freq)
+                sys.stdout.flush()
+            A = self.getA(freq)
+            rhs  = self.getRHS(freq)
+            Ainv = self.Solver(A, **self.solverOpts)
+            e_s = Ainv * rhs
+
+            # Store the fields
+            Src = self.survey.getSrcByFreq(freq)[0]
+            # NOTE: only store the e_solution(secondary), all other components calculated in the fields object
+            F[Src, 'e_1dSolution'] = e_s[:,-1] # Only storing the yx polarization as 1d
+
+            # Note curl e = -iwb so b = -curl e /iw
+            # b = -( self.mesh.nodalGrad * e )/( 1j*omega(freq) )
+            # F[Src, 'b_1d'] = b[:,1]
+            if self.verbose:
+                print 'Ran for {:f} seconds'.format(time.time()-startTime)
+                sys.stdout.flush()
+        return F
+
+# Note this is not fully functional.
+# Missing:
+# Fields class corresponding to the fields
+# Update Jvec and Jtvec to include all the derivatives components
+# Other things ...
+class eForm_TotalField(BaseMTProblem):
+    """
+    A MT problem solving a e formulation and a Total bondary domain decompostion.
+
+    Solves the equation:
+
+    Math:
+
+
+    """
+
+    # From FDEMproblem: Used to project the fields. Currently not used for MTproblem.
+    _fieldType = 'e'
+    _eqLocs    = 'EF'
+
+
+    def __init__(self, mesh, **kwargs):
+        BaseMTProblem.__init__(self, mesh, **kwargs)
+    @property
+    def MeMui(self):
+        """
+            Edge inner product matrix
+        """
+        if getattr(self, '_MeMui', None) is None:
+            self._MeMui = self.mesh.getEdgeInnerProduct(1.0/mu_0)
+        return self._MeMui
+
+    @property
+    def MfSigma(self):
+        """
+            Edge inner product matrix
+        """
+        if getattr(self, '_MfSigma', None) is None:
+            self._MfSigma = self.mesh.getFaceInnerProduct(self.curModel.sigma)
+        return self._MfSigma
+
+    def getA(self, freq, full=False):
+        """
+            Function to get the A matrix.
+
+            :param float freq: Frequency
+            :param logic full: Return full A or the inner part
+            :rtype: scipy.sparse.csr_matrix
+            :return: A
+        """
+
+        MeMui = self.MeMui
+        MfSigma = self.MfSigma
+        # Note: need to use the code above since in the 1D problem I want
+        # e to live on Faces(nodes) and h on edges(cells). Might need to rethink this
+        # Possible that _fieldType and _eqLocs can fix this
+        # MeMui = self.MfMui
+        # MfSigma = self.MfSigma
+        C = self.mesh.nodalGrad
+        # Make A
+        A = C.T*MeMui*C + 1j*omega(freq)*MfSigma
+        # Either return full or only the inner part of A
+        if full:
+            return A
+        else:
+            return A[1:-1,1:-1]
+
+    def getADeriv_m(self, freq, u, v, adjoint=False):
+        raise NotImplementedError('getADeriv is not implemented')
+
+    def getRHS(self, freq):
+        """
+            Function to return the right hand side for the system.
+            :param float freq: Frequency
+            :rtype: numpy.ndarray (nE, 2), numpy.ndarray (nE, 2)
+            :return: RHS for both polarizations, primary fields
+        """
+        # Get sources for the frequency
+        # NOTE: Need to use the source information, doesn't really apply in 1D
+        src = self.survey.getSrcByFreq(freq)
+        # Get the full A
+        A = self.getA(freq,full=True)
+        # Define the outer part of the solution matrix
+        Aio = A[1:-1,[0,-1]]
+        Ed, Eu, Hd, Hu = getEHfields(self.mesh,self.curModel.sigma,freq,self.mesh.vectorNx)
+        Etot = (Ed + Eu)
+        sourceAmp = 1.0
+        Etot = ((Etot/Etot[-1])*sourceAmp) # Scale the fields to be equal to sourceAmp at the top
+        ## Note: The analytic solution is derived with e^iwt
+        eBC = np.r_[Etot[0],Etot[-1]]
+        # The right hand side
+
+        return -Aio*eBC, eBC
+
+    def getRHSderiv_m(self, freq, backSigma, u, v, adjoint=False):
+        raise NotImplementedError('getRHSDeriv not implemented yet')
+        return None
+
+    def fields(self, m):
+        '''
+        Function to calculate all the fields for the model m.
+
+        :param np.ndarray (nC,) m: Conductivity model
+        :param np.ndarray (nC,) m_back: Background conductivity model
+        '''
+        self.curModel = m
+        # RHS, CalcFields = self.getRHS(freq,m_back), self.calcFields
+
+        F = Fields1D_e(self.mesh, self.survey)
+        for freq in self.survey.freqs:
+            if self.verbose:
+                startTime = time.time()
+                print 'Starting work for {:.3e}'.format(freq)
+                sys.stdout.flush()
+            A = self.getA(freq)
+            rhs, e_o = self.getRHS(freq)
+            Ainv = self.Solver(A, **self.solverOpts)
+            e_i = Ainv * rhs
+            e = mkvc(np.r_[e_o[0], e_i, e_o[1]],2)
+            # Store the fields
+            Src = self.survey.getSrcByFreq(freq)
+            # NOTE: only store e fields
+            F[Src, 'e_1dSolution'] = e[:,0]
+            if self.verbose:
+                print 'Ran for {:f} seconds'.format(time.time()-startTime)
+                sys.stdout.flush()
+        return F

SimPEG/MT/Problem1D/__init__.py

@@ -0,0 +1 @@
+from Probs import eForm_TotalField, eForm_psField

SimPEG/MT/Problem2D/__init__.py

@@ -0,0 +1 @@
+pass

SimPEG/MT/Problem3D/Probs.py

@@ -0,0 +1,138 @@
+from SimPEG import Survey, Problem, Utils, Models, np, sp, mkvc, SolverLU as SimpegSolver
+from SimPEG.EM.Utils import omega
+from scipy.constants import mu_0
+from SimPEG.MT.BaseMT import BaseMTProblem
+from SimPEG.MT.SurveyMT import Survey, Data
+from SimPEG.MT.FieldsMT import Fields3D_e
+import multiprocessing, sys, time
+
+
+
+class eForm_ps(BaseMTProblem):
+    """
+    A MT problem solving a e formulation and a primary/secondary fields decompostion.
+
+    By eliminating the magnetic flux density using
+
+        .. math ::
+
+            \mathbf{b} = \\frac{1}{i \omega}\\left(-\mathbf{C} \mathbf{e} \\right)
+
+
+    we can write Maxwell's equations as a second order system in \\\(\\\mathbf{e}\\\) only:
+
+    .. math ::
+        \\left(\mathbf{C}^T \mathbf{M^f_{\mu^{-1}}} \mathbf{C} + i \omega \mathbf{M^e_\sigma}] \mathbf{e}_{s} =& i \omega \mathbf{M^e_{\delta \sigma}} \mathbf{e}_{p}
+    which we solve for \\\(\\\mathbf{e_s}\\\). The total field \\\mathbf{e}\\ = \\\mathbf{e_p}\\ + \\\mathbf{e_s}\\.
+
+    The primary field is estimated from a background model (commonly as a 1D model).
+
+    """
+
+    # From FDEMproblem: Used to project the fields. Currently not used for MTproblem.
+    _fieldType = 'e'
+    _eqLocs    = 'FE'
+    fieldsPair = Fields3D_e
+    _sigmaPrimary = None
+
+    def __init__(self, mesh, **kwargs):
+        BaseMTProblem.__init__(self, mesh, **kwargs)
+
+    @property
+    def sigmaPrimary(self):
+        """
+        A background model, use for the calculation of the primary fields.
+
+        """
+        return self._sigmaPrimary
+    @sigmaPrimary.setter
+    def sigmaPrimary(self, val):
+        # Note: TODO add logic for val, make sure it is the correct size.
+        self._sigmaPrimary = val
+
+    def getA(self, freq):
+        """
+            Function to get the A system.
+
+            :param float freq: Frequency
+            :rtype: scipy.sparse.csr_matrix
+            :return: A
+        """
+        Mmui = self.MfMui
+        Msig = self.MeSigma
+        C = self.mesh.edgeCurl
+
+        return C.T*Mmui*C + 1j*omega(freq)*Msig
+
+    def getADeriv_m(self, freq, u, v, adjoint=False):
+        """
+        Calculate the derivative of A wrt m.
+
+        """
+
+        # This considers both polarizations and returns a nE,2 matrix for each polarization
+        if adjoint:
+            dMe_dsigV = sp.hstack(( self.MeSigmaDeriv( u['e_pxSolution'] ).T, self.MeSigmaDeriv(u['e_pySolution'] ).T ))*v
+        else:
+            # Need a nE,2 matrix to be returned
+            dMe_dsigV = np.hstack(( mkvc(self.MeSigmaDeriv( u['e_pxSolution'] )*v,2), mkvc( self.MeSigmaDeriv(u['e_pySolution'] )*v,2) ))
+        return 1j * omega(freq) * dMe_dsigV
+
+
+    def getRHS(self, freq):
+        """
+        Function to return the right hand side for the system.
+
+            :param float freq: Frequency
+            :rtype: numpy.ndarray (nE, 2), numpy.ndarray (nE, 2)
+            :return: RHS for both polarizations, primary fields
+        """
+
+        # Get sources for the frequncy(polarizations)
+        Src = self.survey.getSrcByFreq(freq)[0]
+        S_e = Src.S_e(self)
+        return -1j * omega(freq) * S_e
+
+    def getRHSDeriv_m(self, freq, v, adjoint=False):
+        """
+        The derivative of the RHS with respect to sigma
+        """
+
+        Src = self.survey.getSrcByFreq(freq)[0]
+        S_eDeriv = Src.S_eDeriv_m(self, v, adjoint)
+        return -1j * omega(freq) * S_eDeriv
+
+    def fields(self, m):
+        '''
+        Function to calculate all the fields for the model m.
+
+        :param np.ndarray (nC,) m: Conductivity model
+        '''
+        # Set the current model
+        self.curModel = m
+
+        F = Fields3D_e(self.mesh, self.survey)
+        for freq in self.survey.freqs:
+            if self.verbose:
+                startTime = time.time()
+                print 'Starting work for {:.3e}'.format(freq)
+                sys.stdout.flush()
+            A = self.getA(freq)
+            rhs  = self.getRHS(freq)
+            # Solve the system
+            Ainv = self.Solver(A, **self.solverOpts)
+            e_s = Ainv * rhs
+
+            # Store the fields
+            Src = self.survey.getSrcByFreq(freq)[0]
+            # Store the fieldss
+            F[Src, 'e_pxSolution'] = e_s[:,0]
+            F[Src, 'e_pySolution'] = e_s[:,1]
+            # Note curl e = -iwb so b = -curl/iw
+
+            if self.verbose:
+                print 'Ran for {:f} seconds'.format(time.time()-startTime)
+                sys.stdout.flush()
+            Ainv.clean()
+        return F
+

SimPEG/MT/Problem3D/__init__.py

@@ -0,0 +1 @@
+from Probs import eForm_ps

SimPEG/MT/SrcMT.py

@@ -0,0 +1,206 @@
+from SimPEG import Utils, Problem, Maps, np, sp, mkvc
+from SimPEG.EM.FDEM.SrcFDEM import BaseSrc as FDEMBaseSrc
+from SimPEG.EM.Utils import omega
+from scipy.constants import mu_0
+from numpy.lib import recfunctions as recFunc
+from Utils.sourceUtils import homo1DModelSource
+from Utils import rec2ndarr
+import sys
+
+#################
+###   Sources ###
+#################
+
+class BaseMTSrc(FDEMBaseSrc):
+    '''
+    Sources for the MT problem.
+    Use the SimPEG BaseSrc, since the source fields share properties with the transmitters.
+
+    :param float freq: The frequency of the source
+    :param list rxList: A list of receivers associated with the source
+    '''
+
+    freq = None #: Frequency (float)
+
+
+    def __init__(self, rxList, freq):
+
+        self.freq = float(freq)
+        FDEMBaseSrc.__init__(self, rxList)
+
+# 1D sources
+class polxy_1DhomotD(BaseMTSrc):
+    """
+    MT source for both polarizations (x and y) for the total Domain.
+
+    It calculates fields calculated based on conditions on the boundary of the domain.
+    """
+    def __init__(self, rxList, freq):
+        BaseMTSrc.__init__(self, rxList, freq)
+
+
+    # TODO: need to add the  primary fields calc and source terms into the problem.
+
+# Need to implement such that it works for all dims.
+class polxy_1Dprimary(BaseMTSrc):
+    """
+    MT source for both polarizations (x and y) given a 1D primary models.
+    It assigns fields calculated from the 1D model as fields in the full space of the problem.
+    """
+    def __init__(self, rxList, freq):
+        # assert mkvc(self.mesh.hz.shape,1) == mkvc(sigma1d.shape,1),'The number of values in the 1D background model does not match the number of vertical cells (hz).'
+        self.sigma1d = None
+        BaseMTSrc.__init__(self, rxList, freq)
+        # Hidden property of the ePrimary
+        self._ePrimary = None
+
+    def ePrimary(self,problem):
+        # Get primary fields for both polarizations
+        if self.sigma1d is None:
+            # Set the sigma1d as the 1st column in the background model
+            if len(problem._sigmaPrimary) == problem.mesh.nC:
+                if problem.mesh.dim == 1:
+                    self.sigma1d = problem.mesh.r(problem._sigmaPrimary,'CC','CC','M')[:]
+                elif problem.mesh.dim == 3:
+                    self.sigma1d = problem.mesh.r(problem._sigmaPrimary,'CC','CC','M')[0,0,:]
+            # Or as the 1D model that matches the vertical cell number
+            elif len(problem._sigmaPrimary) == problem.mesh.nCz:
+                self.sigma1d = problem._sigmaPrimary
+
+        if self._ePrimary is None:
+            self._ePrimary = homo1DModelSource(problem.mesh,self.freq,self.sigma1d)
+        return self._ePrimary
+
+    def bPrimary(self,problem):
+        # Project ePrimary to bPrimary
+        # Satisfies the primary(background) field conditions
+        if problem.mesh.dim == 1:
+            C = problem.mesh.nodalGrad
+        elif problem.mesh.dim == 3:
+            C = problem.mesh.edgeCurl
+        bBG_bp = (- C * self.ePrimary(problem) )*(1/( 1j*omega(self.freq) ))
+        return bBG_bp
+
+    def S_e(self,problem):
+        """
+        Get the electrical field source
+        """
+        e_p = self.ePrimary(problem)
+        Map_sigma_p = Maps.Vertical1DMap(problem.mesh)
+        sigma_p = Map_sigma_p._transform(self.sigma1d)
+        # Make mass matrix
+        # Note: M(sig) - M(sig_p) = M(sig - sig_p)
+        # Need to deal with the edge/face discrepencies between 1d/2d/3d
+        if problem.mesh.dim == 1:
+            Mesigma = problem.mesh.getFaceInnerProduct(problem.curModel.sigma)
+            Mesigma_p = problem.mesh.getFaceInnerProduct(sigma_p)
+        if problem.mesh.dim == 2:
+            pass
+        if problem.mesh.dim == 3:
+            Mesigma = problem.MeSigma
+            Mesigma_p = problem.mesh.getEdgeInnerProduct(sigma_p)
+        return (Mesigma - Mesigma_p) * e_p
+
+    def S_eDeriv_m(self, problem, v, adjoint = False):
+        '''
+        Get the derivative of S_e wrt to sigma (m)
+        '''
+        # Need to deal with
+        if problem.mesh.dim == 1:
+            # Need to use the faceInnerProduct
+            MsigmaDeriv = problem.mesh.getFaceInnerProductDeriv(problem.curModel.sigma)(self.ePrimary(problem)[:,1]) * problem.curModel.sigmaDeriv
+            # MsigmaDeriv = ( MsigmaDeriv * MsigmaDeriv.T)**2
+        if problem.mesh.dim == 2:
+            pass
+        if problem.mesh.dim == 3:
+            # Need to take the derivative of both u_px and u_py
+            ePri = self.ePrimary(problem)
+            # MsigmaDeriv = problem.MeSigmaDeriv(ePri[:,0]) + problem.MeSigmaDeriv(ePri[:,1])
+            # MsigmaDeriv = problem.MeSigmaDeriv(np.sum(ePri,axis=1))
+            if adjoint:
+                return sp.hstack(( problem.MeSigmaDeriv(ePri[:,0]).T, problem.MeSigmaDeriv(ePri[:,1]).T ))*v
+            else:
+                return np.hstack(( mkvc(problem.MeSigmaDeriv(ePri[:,0]) * v,2), mkvc(problem.MeSigmaDeriv(ePri[:,1])*v,2) ))
+        if adjoint:
+            #
+            return MsigmaDeriv.T * v
+        else:
+            # v should be nC size
+            return MsigmaDeriv * v
+
+class polxy_3Dprimary(BaseMTSrc):
+    """
+    MT source for both polarizations (x and y) given a 3D primary model. It assigns fields calculated from the 1D model
+    as fields in the full space of the problem.
+    """
+    def __init__(self, rxList, freq):
+        # assert mkvc(self.mesh.hz.shape,1) == mkvc(sigma1d.shape,1),'The number of values in the 1D background model does not match the number of vertical cells (hz).'
+        self.sigmaPrimary = None
+        BaseMTSrc.__init__(self, rxList, freq)
+        # Hidden property of the ePrimary
+        self._ePrimary = None
+
+    def ePrimary(self,problem):
+        # Get primary fields for both polarizations
+        self.sigmaPrimary = problem._sigmaPrimary
+
+        if self._ePrimary is None:
+            self._ePrimary = homo3DModelSource(problem.mesh,self.sigmaPrimary,self.freq)
+        return self._ePrimary
+
+    def bPrimary(self,problem):
+        # Project ePrimary to bPrimary
+        # Satisfies the primary(background) field conditions
+        if problem.mesh.dim == 1:
+            C = problem.mesh.nodalGrad
+        elif problem.mesh.dim == 3:
+            C = problem.mesh.edgeCurl
+        bBG_bp = (- C * self.ePrimary(problem) )*(1/( 1j*omega(self.freq) ))
+        return bBG_bp
+
+    def S_e(self,problem):
+        """
+        Get the electrical field source
+        """
+        e_p = self.ePrimary(problem)
+        Map_sigma_p = Maps.Vertical1DMap(problem.mesh)
+        sigma_p = Map_sigma_p._transform(self.sigma1d)
+        # Make mass matrix
+        # Note: M(sig) - M(sig_p) = M(sig - sig_p)
+        # Need to deal with the edge/face discrepencies between 1d/2d/3d
+        if problem.mesh.dim == 1:
+            Mesigma = problem.mesh.getFaceInnerProduct(problem.curModel.sigma)
+            Mesigma_p = problem.mesh.getFaceInnerProduct(sigma_p)
+        if problem.mesh.dim == 2:
+            pass
+        if problem.mesh.dim == 3:
+            Mesigma = problem.MeSigma
+            Mesigma_p = problem.mesh.getEdgeInnerProduct(sigma_p)
+        return (Mesigma - Mesigma_p) * e_p
+
+    def S_eDeriv_m(self, problem, v, adjoint = False):
+        '''
+        Get the derivative of S_e wrt to sigma (m)
+        '''
+        # Need to deal with
+        if problem.mesh.dim == 1:
+            # Need to use the faceInnerProduct
+            MsigmaDeriv = problem.mesh.getFaceInnerProductDeriv(problem.curModel.sigma)(self.ePrimary(problem)[:,1]) * problem.curModel.sigmaDeriv
+            # MsigmaDeriv = ( MsigmaDeriv * MsigmaDeriv.T)**2
+        if problem.mesh.dim == 2:
+            pass
+        if problem.mesh.dim == 3:
+            # Need to take the derivative of both u_px and u_py
+            ePri = self.ePrimary(problem)
+            # MsigmaDeriv = problem.MeSigmaDeriv(ePri[:,0]) + problem.MeSigmaDeriv(ePri[:,1])
+            # MsigmaDeriv = problem.MeSigmaDeriv(np.sum(ePri,axis=1))
+            if adjoint:
+                return sp.hstack(( problem.MeSigmaDeriv(ePri[:,0]).T, problem.MeSigmaDeriv(ePri[:,1]).T ))*v
+            else:
+                return np.hstack(( mkvc(problem.MeSigmaDeriv(ePri[:,0]) * v,2), mkvc(problem.MeSigmaDeriv(ePri[:,1])*v,2) ))
+        if adjoint:
+            #
+            return MsigmaDeriv.T * v
+        else:
+            # v should be nC size
+            return MsigmaDeriv * v

SimPEG/MT/SurveyMT.py

@@ -0,0 +1,562 @@
+from SimPEG import Survey as SimPEGsurvey, Utils, Problem, Maps, np, sp, mkvc
+from SimPEG.EM.FDEM.SrcFDEM import BaseSrc as FDEMBaseSrc
+from SimPEG.EM.Utils import omega
+from scipy.constants import mu_0
+from numpy.lib import recfunctions as recFunc
+from Utils import rec2ndarr
+import SrcMT
+import sys
+
+#################
+### Receivers ###
+#################
+class Rx(SimPEGsurvey.BaseRx):
+    """
+        Class that defines natural source receivers.
+
+        See knownRxTypes for types of allowed receivers.
+
+        :param ndArray locs: Locations of the receivers
+        :param str rxType: The type of receiver
+
+    """
+
+    knownRxTypes = {
+                    # 3D impedance
+                    'zxxr':['Z3D', 'real'],
+                    'zxyr':['Z3D', 'real'],
+                    'zyxr':['Z3D', 'real'],
+                    'zyyr':['Z3D', 'real'],
+                    'zxxi':['Z3D', 'imag'],
+                    'zxyi':['Z3D', 'imag'],
+                    'zyxi':['Z3D', 'imag'],
+                    'zyyi':['Z3D', 'imag'],
+                    # 2D impedance
+                    # TODO:
+                    # 1D impedance
+                    'z1dr':['Z1D', 'real'],
+                    'z1di':['Z1D', 'imag'],
+                    # Tipper
+                    'tzxr':['T3D','real'],
+                    'tzxi':['T3D','imag'],
+                    'tzyr':['T3D','real'],
+                    'tzyi':['T3D','imag']
+                   }
+    # TODO: Have locs as single or double coordinates for both or numerator and denominator separately, respectively.
+    def __init__(self, locs, rxType):
+        SimPEGsurvey.BaseRx.__init__(self, locs, rxType)
+
+    @property
+    def projType(self):
+        """
+        Receiver type for projection.
+
+        """
+        return self.knownRxTypes[self.rxType][0]
+
+    @property
+    def projComp(self):
+        """Component projection (real/imag)"""
+        return self.knownRxTypes[self.rxType][1]
+
+    def eval(self, src, mesh, f):
+        '''
+        Project the fields to natural source data.
+
+            :param SrcMT src: The source of the fields to project
+            :param SimPEG.Mesh mesh:
+            :param FieldsMT f: Natural source fields object to project
+        '''
+
+        ## NOTE: Assumes that e is on t
+        if self.projType is 'Z1D':
+            Pex = mesh.getInterpolationMat(self.locs[:,-1],'Fx')
+            Pbx = mesh.getInterpolationMat(self.locs[:,-1],'Ex')
+            ex = Pex*mkvc(f[src,'e_1d'],2)
+            bx = Pbx*mkvc(f[src,'b_1d'],2)/mu_0
+            # Note: Has a minus sign in front, to comply with quadrant calculations.
+            # Can be derived from zyx case for the 3D case.
+            f_part_complex = -ex/bx
+        # elif self.projType is 'Z2D':
+        elif self.projType is 'Z3D':
+            ## NOTE: Assumes that e is on edges and b on the faces. Need to generalize that or use a prop of fields to determine that.
+            if self.locs.ndim == 3:
+                eFLocs = self.locs[:,:,0]
+                bFLocs = self.locs[:,:,1]
+            else:
+                eFLocs = self.locs
+                bFLocs = self.locs
+            # Get the projection
+            Pex = mesh.getInterpolationMat(eFLocs,'Ex')
+            Pey = mesh.getInterpolationMat(eFLocs,'Ey')
+            Pbx = mesh.getInterpolationMat(bFLocs,'Fx')
+            Pby = mesh.getInterpolationMat(bFLocs,'Fy')
+            # Get the fields at location
+            # px: x-polaration and py: y-polaration.
+            ex_px = Pex*f[src,'e_px']
+            ey_px = Pey*f[src,'e_px']
+            ex_py = Pex*f[src,'e_py']
+            ey_py = Pey*f[src,'e_py']
+            hx_px = Pbx*f[src,'b_px']/mu_0
+            hy_px = Pby*f[src,'b_px']/mu_0
+            hx_py = Pbx*f[src,'b_py']/mu_0
+            hy_py = Pby*f[src,'b_py']/mu_0
+            # Make the complex data
+            if 'zxx' in self.rxType:
+                f_part_complex = ( ex_px*hy_py - ex_py*hy_px)/(hx_px*hy_py - hx_py*hy_px)
+            elif 'zxy' in self.rxType:
+                f_part_complex = (-ex_px*hx_py + ex_py*hx_px)/(hx_px*hy_py - hx_py*hy_px)
+            elif 'zyx' in self.rxType:
+                f_part_complex = ( ey_px*hy_py - ey_py*hy_px)/(hx_px*hy_py - hx_py*hy_px)
+            elif 'zyy' in self.rxType:
+                f_part_complex = (-ey_px*hx_py + ey_py*hx_px)/(hx_px*hy_py - hx_py*hy_px)
+        elif self.projType is 'T3D':
+            if self.locs.ndim == 3:
+                horLoc = self.locs[:,:,0]
+                vertLoc = self.locs[:,:,1]
+            else:
+                horLoc = self.locs
+                vertLoc = self.locs
+            Pbx = mesh.getInterpolationMat(horLoc,'Fx')
+            Pby = mesh.getInterpolationMat(horLoc,'Fy')
+            Pbz = mesh.getInterpolationMat(vertLoc,'Fz')
+            bx_px = Pbx*f[src,'b_px']
+            by_px = Pby*f[src,'b_px']
+            bz_px = Pbz*f[src,'b_px']
+            bx_py = Pbx*f[src,'b_py']
+            by_py = Pby*f[src,'b_py']
+            bz_py = Pbz*f[src,'b_py']
+            if 'tzx' in self.rxType:
+                f_part_complex = (- by_px*bz_py + by_py*bz_px)/(bx_px*by_py - bx_py*by_px)
+            if 'tzy' in self.rxType:
+                f_part_complex = (  bx_px*bz_py - bx_py*bz_px)/(bx_px*by_py - bx_py*by_px)
+
+        else:
+            NotImplementedError('Projection of {:s} receiver type is not implemented.'.format(self.rxType))
+        # Get the real or imag component
+        real_or_imag = self.projComp
+        f_part = getattr(f_part_complex, real_or_imag)
+        # print f_part
+        return f_part
+
+    def evalDeriv(self, src, mesh, f, v, adjoint=False):
+        """
+        The derivative of the projection wrt u
+
+        :param MTsrc src: MT source
+        :param TensorMesh mesh: Mesh defining the topology of the problem
+        :param MTfields f: MT fields object of the source
+        :param numpy.ndarray v: Random vector of size
+        """
+
+        real_or_imag = self.projComp
+
+        if not adjoint:
+            if self.projType is 'Z1D':
+                Pex = mesh.getInterpolationMat(self.locs[:,-1],'Fx')
+                Pbx = mesh.getInterpolationMat(self.locs[:,-1],'Ex')
+                # ex = Pex*mkvc(f[src,'e_1d'],2)
+                # bx = Pbx*mkvc(f[src,'b_1d'],2)/mu_0
+                dP_de = -mkvc(Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0))*(Pex*v),2)
+                dP_db = mkvc( Utils.sdiag(Pex*mkvc(f[src,'e_1d'],2))*(Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0)).T*Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0)))*(Pbx*f._bDeriv_u(src,v)/mu_0),2)
+                PDeriv_complex = np.sum(np.hstack((dP_de,dP_db)),1)
+            elif self.projType is 'Z2D':
+                raise NotImplementedError('Has not been implement for 2D impedance tensor')
+            elif self.projType is 'Z3D':
+                if self.locs.ndim == 3:
+                    eFLocs = self.locs[:,:,0]
+                    bFLocs = self.locs[:,:,1]
+                else:
+                    eFLocs = self.locs
+                    bFLocs = self.locs
+                # Get the projection
+                Pex = mesh.getInterpolationMat(eFLocs,'Ex')
+                Pey = mesh.getInterpolationMat(eFLocs,'Ey')
+                Pbx = mesh.getInterpolationMat(bFLocs,'Fx')
+                Pby = mesh.getInterpolationMat(bFLocs,'Fy')
+                # Get the fields at location
+                # px: x-polaration and py: y-polaration.
+                ex_px = Pex*f[src,'e_px']
+                ey_px = Pey*f[src,'e_px']
+                ex_py = Pex*f[src,'e_py']
+                ey_py = Pey*f[src,'e_py']
+                hx_px = Pbx*f[src,'b_px']/mu_0
+                hy_px = Pby*f[src,'b_px']/mu_0
+                hx_py = Pbx*f[src,'b_py']/mu_0
+                hy_py = Pby*f[src,'b_py']/mu_0
+                # Derivatives as lambda functions
+                # The size of the diratives should be nD,nU
+                ex_px_u = lambda vec: Pex*f._e_pxDeriv_u(src,vec)
+                ey_px_u = lambda vec: Pey*f._e_pxDeriv_u(src,vec)
+                ex_py_u = lambda vec: Pex*f._e_pyDeriv_u(src,vec)
+                ey_py_u = lambda vec: Pey*f._e_pyDeriv_u(src,vec)
+                # NOTE: Think b_p?Deriv_u should return a 2*nF size matrix
+                hx_px_u = lambda vec: Pbx*f._b_pxDeriv_u(src,vec)/mu_0
+                hy_px_u = lambda vec: Pby*f._b_pxDeriv_u(src,vec)/mu_0
+                hx_py_u = lambda vec: Pbx*f._b_pyDeriv_u(src,vec)/mu_0
+                hy_py_u = lambda vec: Pby*f._b_pyDeriv_u(src,vec)/mu_0
+                # Update the input vector
+                sDiag = lambda t: Utils.sdiag(mkvc(t,2))
+                # Define the components of the derivative
+                Hd = sDiag(1./(sDiag(hx_px)*hy_py - sDiag(hx_py)*hy_px))
+                Hd_uV = sDiag(hy_py)*hx_px_u(v) + sDiag(hx_px)*hy_py_u(v) - sDiag(hx_py)*hy_px_u(v) - sDiag(hy_px)*hx_py_u(v)
+                # Calculate components
+                if 'zxx' in self.rxType:
+                    Zij = sDiag(Hd*( sDiag(ex_px)*hy_py - sDiag(ex_py)*hy_px ))
+                    ZijN_uV =  sDiag(hy_py)*ex_px_u(v) + sDiag(ex_px)*hy_py_u(v) - sDiag(ex_py)*hy_px_u(v) - sDiag(hy_px)*ex_py_u(v)
+                elif 'zxy' in self.rxType:
+                    Zij = sDiag(Hd*(-sDiag(ex_px)*hx_py + sDiag(ex_py)*hx_px ))
+                    ZijN_uV = -sDiag(hx_py)*ex_px_u(v) - sDiag(ex_px)*hx_py_u(v) + sDiag(ex_py)*hx_px_u(v) + sDiag(hx_px)*ex_py_u(v)
+                elif 'zyx' in self.rxType:
+                    Zij = sDiag(Hd*( sDiag(ey_px)*hy_py - sDiag(ey_py)*hy_px ))
+                    ZijN_uV =  sDiag(hy_py)*ey_px_u(v) + sDiag(ey_px)*hy_py_u(v) - sDiag(ey_py)*hy_px_u(v) - sDiag(hy_px)*ey_py_u(v)
+                elif 'zyy' in self.rxType:
+                    Zij = sDiag(Hd*(-sDiag(ey_px)*hx_py + sDiag(ey_py)*hx_px ))
+                    ZijN_uV = -sDiag(hx_py)*ey_px_u(v) - sDiag(ey_px)*hx_py_u(v) + sDiag(ey_py)*hx_px_u(v) + sDiag(hx_px)*ey_py_u(v)
+
+                # Calculate the complex derivative
+                PDeriv_complex = Hd * (ZijN_uV - Zij * Hd_uV )
+            elif self.projType is 'T3D':
+                if self.locs.ndim == 3:
+                    eFLocs = self.locs[:,:,0]
+                    bFLocs = self.locs[:,:,1]
+                else:
+                    eFLocs = self.locs
+                    bFLocs = self.locs
+                # Get the projection
+                Pbx = mesh.getInterpolationMat(bFLocs,'Fx')
+                Pby = mesh.getInterpolationMat(bFLocs,'Fy')
+                Pbz = mesh.getInterpolationMat(bFLocs,'Fz')
+
+                # Get the fields at location
+                # px: x-polaration and py: y-polaration.
+                bx_px = Pbx*f[src,'b_px']
+                by_px = Pby*f[src,'b_px']
+                bz_px = Pbz*f[src,'b_px']
+                bx_py = Pbx*f[src,'b_py']
+                by_py = Pby*f[src,'b_py']
+                bz_py = Pbz*f[src,'b_py']
+                # Derivatives as lambda functions
+                # NOTE: Think b_p?Deriv_u should return a 2*nF size matrix
+                bx_px_u = lambda vec: Pbx*f._b_pxDeriv_u(src,vec)
+                by_px_u = lambda vec: Pby*f._b_pxDeriv_u(src,vec)
+                bz_px_u = lambda vec: Pbz*f._b_pxDeriv_u(src,vec)
+                bx_py_u = lambda vec: Pbx*f._b_pyDeriv_u(src,vec)
+                by_py_u = lambda vec: Pby*f._b_pyDeriv_u(src,vec)
+                bz_py_u = lambda vec: Pbz*f._b_pyDeriv_u(src,vec)
+                # Update the input vector
+                sDiag = lambda t: Utils.sdiag(mkvc(t,2))
+                # Define the components of the derivative
+                Hd = sDiag(1./(sDiag(bx_px)*by_py - sDiag(bx_py)*by_px))
+                Hd_uV = sDiag(by_py)*bx_px_u(v) + sDiag(bx_px)*by_py_u(v) - sDiag(bx_py)*by_px_u(v) - sDiag(by_px)*bx_py_u(v)
+                if 'tzx' in self.rxType:
+                    Tij = sDiag(Hd*( - sDiag(by_px)*bz_py + sDiag(by_py)*bz_px ))
+                    TijN_uV = -sDiag(by_px)*bz_py_u(v) - sDiag(bz_py)*by_px_u(v) + sDiag(by_py)*bz_px_u(v) + sDiag(bz_px)*by_py_u(v)
+                elif 'tzy' in self.rxType:
+                    Tij = sDiag(Hd*( sDiag(bx_px)*bz_py - sDiag(bx_py)*bz_px ))
+                    TijN_uV =  sDiag(bz_py)*bx_px_u(v) + sDiag(bx_px)*bz_py_u(v) - sDiag(bx_py)*bz_px_u(v) - sDiag(bz_px)*bx_py_u(v)
+                # Calculate the complex derivative
+                PDeriv_complex = Hd * (TijN_uV - Tij * Hd_uV )
+
+            # Extract the real number for the real/imag components.
+            Pv = np.array(getattr(PDeriv_complex, real_or_imag))
+        elif adjoint:
+            # Note: The v vector is real and the return should be complex
+            if self.projType is 'Z1D':
+                Pex = mesh.getInterpolationMat(self.locs[:,-1],'Fx')
+                Pbx = mesh.getInterpolationMat(self.locs[:,-1],'Ex')
+                # ex = Pex*mkvc(f[src,'e_1d'],2)
+                # bx = Pbx*mkvc(f[src,'b_1d'],2)/mu_0
+                dP_deTv = -mkvc(Pex.T*Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0)).T*v,2)
+                db_duv = Pbx.T/mu_0*Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0))*(Utils.sdiag(1./(Pbx*mkvc(f[src,'b_1d'],2)/mu_0))).T*Utils.sdiag(Pex*mkvc(f[src,'e_1d'],2)).T*v
+                dP_dbTv = mkvc(f._bDeriv_u(src,db_duv,adjoint=True),2)
+                PDeriv_real = np.sum(np.hstack((dP_deTv,dP_dbTv)),1)
+            elif self.projType is 'Z2D':
+                raise NotImplementedError('Has not be implement for 2D impedance tensor')
+            elif self.projType is 'Z3D':
+                if self.locs.ndim == 3:
+                    eFLocs = self.locs[:,:,0]
+                    bFLocs = self.locs[:,:,1]
+                else:
+                    eFLocs = self.locs
+                    bFLocs = self.locs
+                # Get the projection
+                Pex = mesh.getInterpolationMat(eFLocs,'Ex')
+                Pey = mesh.getInterpolationMat(eFLocs,'Ey')
+                Pbx = mesh.getInterpolationMat(bFLocs,'Fx')
+                Pby = mesh.getInterpolationMat(bFLocs,'Fy')
+                # Get the fields at location
+                # px: x-polaration and py: y-polaration.
+                aex_px = mkvc(mkvc(f[src,'e_px'],2).T*Pex.T)
+                aey_px = mkvc(mkvc(f[src,'e_px'],2).T*Pey.T)
+                aex_py = mkvc(mkvc(f[src,'e_py'],2).T*Pex.T)
+                aey_py = mkvc(mkvc(f[src,'e_py'],2).T*Pey.T)
+                ahx_px = mkvc(mkvc(f[src,'b_px'],2).T/mu_0*Pbx.T)
+                ahy_px = mkvc(mkvc(f[src,'b_px'],2).T/mu_0*Pby.T)
+                ahx_py = mkvc(mkvc(f[src,'b_py'],2).T/mu_0*Pbx.T)
+                ahy_py = mkvc(mkvc(f[src,'b_py'],2).T/mu_0*Pby.T)
+                # Derivatives as lambda functions
+                aex_px_u = lambda vec: f._e_pxDeriv_u(src,Pex.T*vec,adjoint=True)
+                aey_px_u = lambda vec: f._e_pxDeriv_u(src,Pey.T*vec,adjoint=True)
+                aex_py_u = lambda vec: f._e_pyDeriv_u(src,Pex.T*vec,adjoint=True)
+                aey_py_u = lambda vec: f._e_pyDeriv_u(src,Pey.T*vec,adjoint=True)
+                ahx_px_u = lambda vec: f._b_pxDeriv_u(src,Pbx.T*vec,adjoint=True)/mu_0
+                ahy_px_u = lambda vec: f._b_pxDeriv_u(src,Pby.T*vec,adjoint=True)/mu_0
+                ahx_py_u = lambda vec: f._b_pyDeriv_u(src,Pbx.T*vec,adjoint=True)/mu_0
+                ahy_py_u = lambda vec: f._b_pyDeriv_u(src,Pby.T*vec,adjoint=True)/mu_0
+
+                # Update the input vector
+                # Define shortcuts
+                sDiag = lambda t: Utils.sdiag(mkvc(t,2))
+                sVec = lambda t: Utils.sp.csr_matrix(mkvc(t,2))
+                # Define the components of the derivative
+                aHd = sDiag(1./(sDiag(ahx_px)*ahy_py - sDiag(ahx_py)*ahy_px))
+                aHd_uV = lambda x: ahx_px_u(sDiag(ahy_py)*x) + ahx_px_u(sDiag(ahy_py)*x) - ahy_px_u(sDiag(ahx_py)*x) - ahx_py_u(sDiag(ahy_px)*x)
+                # Need to fix this to reflect the adjoint
+                if 'zxx' in self.rxType:
+                    Zij = sDiag(aHd*( sDiag(ahy_py)*aex_px - sDiag(ahy_px)*aex_py))
+                    ZijN_uV = lambda x: aex_px_u(sDiag(ahy_py)*x) + ahy_py_u(sDiag(aex_px)*x) - ahy_px_u(sDiag(aex_py)*x) - aex_py_u(sDiag(ahy_px)*x)
+                elif 'zxy' in self.rxType:
+                    Zij = sDiag(aHd*(-sDiag(ahx_py)*aex_px + sDiag(ahx_px)*aex_py))
+                    ZijN_uV = lambda x:-aex_px_u(sDiag(ahx_py)*x) - ahx_py_u(sDiag(aex_px)*x) + ahx_px_u(sDiag(aex_py)*x) + aex_py_u(sDiag(ahx_px)*x)
+                elif 'zyx' in self.rxType:
+                    Zij = sDiag(aHd*( sDiag(ahy_py)*aey_px - sDiag(ahy_px)*aey_py))
+                    ZijN_uV = lambda x: aey_px_u(sDiag(ahy_py)*x) + ahy_py_u(sDiag(aey_px)*x) - ahy_px_u(sDiag(aey_py)*x) - aey_py_u(sDiag(ahy_px)*x)
+                elif 'zyy' in self.rxType:
+                    Zij = sDiag(aHd*(-sDiag(ahx_py)*aey_px + sDiag(ahx_px)*aey_py))
+                    ZijN_uV = lambda x:-aey_px_u(sDiag(ahx_py)*x) - ahx_py_u(sDiag(aey_px)*x) + ahx_px_u(sDiag(aey_py)*x) + aey_py_u(sDiag(ahx_px)*x)
+
+                # Calculate the complex derivative
+                PDeriv_real = ZijN_uV(aHd*v) - aHd_uV(Zij.T*aHd*v)#
+                # NOTE: Need to reshape the output to go from 2*nU array to a (nU,2) matrix for each polarization
+                # PDeriv_real = np.hstack((mkvc(PDeriv_real[:len(PDeriv_real)/2],2),mkvc(PDeriv_real[len(PDeriv_real)/2::],2)))
+                PDeriv_real = PDeriv_real.reshape((2,mesh.nE)).T
+
+            elif self.projType is 'T3D':
+                if self.locs.ndim == 3:
+                    bFLocs = self.locs[:,:,1]
+                else:
+                    bFLocs = self.locs
+                # Get the projection
+                Pbx = mesh.getInterpolationMat(bFLocs,'Fx')
+                Pby = mesh.getInterpolationMat(bFLocs,'Fy')
+                Pbz = mesh.getInterpolationMat(bFLocs,'Fz')
+                # Get the fields at location
+                # px: x-polaration and py: y-polaration.
+                abx_px = mkvc(mkvc(f[src,'b_px'],2).T*Pbx.T)
+                aby_px = mkvc(mkvc(f[src,'b_px'],2).T*Pby.T)
+                abz_px = mkvc(mkvc(f[src,'b_px'],2).T*Pbz.T)
+                abx_py = mkvc(mkvc(f[src,'b_py'],2).T*Pbx.T)
+                aby_py = mkvc(mkvc(f[src,'b_py'],2).T*Pby.T)
+                abz_py = mkvc(mkvc(f[src,'b_py'],2).T*Pbz.T)
+                # Derivatives as lambda functions
+                abx_px_u = lambda vec: f._b_pxDeriv_u(src,Pbx.T*vec,adjoint=True)
+                aby_px_u = lambda vec: f._b_pxDeriv_u(src,Pby.T*vec,adjoint=True)
+                abz_px_u = lambda vec: f._b_pxDeriv_u(src,Pbz.T*vec,adjoint=True)
+                abx_py_u = lambda vec: f._b_pyDeriv_u(src,Pbx.T*vec,adjoint=True)
+                aby_py_u = lambda vec: f._b_pyDeriv_u(src,Pby.T*vec,adjoint=True)
+                abz_py_u = lambda vec: f._b_pyDeriv_u(src,Pbz.T*vec,adjoint=True)
+
+                # Update the input vector
+                # Define shortcuts
+                sDiag = lambda t: Utils.sdiag(mkvc(t,2))
+                sVec = lambda t: Utils.sp.csr_matrix(mkvc(t,2))
+                # Define the components of the derivative
+                aHd = sDiag(1./(sDiag(abx_px)*aby_py - sDiag(abx_py)*aby_px))
+                aHd_uV = lambda x: abx_px_u(sDiag(aby_py)*x) + abx_px_u(sDiag(aby_py)*x) - aby_px_u(sDiag(abx_py)*x) - abx_py_u(sDiag(aby_px)*x)
+                # Need to fix this to reflect the adjoint
+                if 'tzx' in self.rxType:
+                    Tij = sDiag(aHd*( -sDiag(abz_py)*aby_px + sDiag(abz_px)*aby_py))
+                    TijN_uV = lambda x: -abz_py_u(sDiag(aby_px)*x) - aby_px_u(sDiag(abz_py)*x) + aby_py_u(sDiag(abz_px)*x) + abz_px_u(sDiag(aby_py)*x)
+                elif 'tzy' in self.rxType:
+                    Tij = sDiag(aHd*( sDiag(abz_py)*abx_px - sDiag(abz_px)*abx_py))
+                    TijN_uV = lambda x: abx_px_u(sDiag(abz_py)*x) + abz_py_u(sDiag(abx_px)*x) - abx_py_u(sDiag(abz_px)*x) - abz_px_u(sDiag(abx_py)*x)
+                # Calculate the complex derivative
+                PDeriv_real = TijN_uV(aHd*v) - aHd_uV(Tij.T*aHd*v)#
+                # NOTE: Need to reshape the output to go from 2*nU array to a (nU,2) matrix for each polarization
+                # PDeriv_real = np.hstack((mkvc(PDeriv_real[:len(PDeriv_real)/2],2),mkvc(PDeriv_real[len(PDeriv_real)/2::],2)))
+                PDeriv_real = PDeriv_real.reshape((2,mesh.nE)).T
+            # Extract the data
+            if real_or_imag == 'imag':
+                Pv = 1j*PDeriv_real
+            elif real_or_imag == 'real':
+                Pv = PDeriv_real.astype(complex)
+
+
+        return Pv
+
+#################
+###  Survey   ###
+#################
+class Survey(SimPEGsurvey.BaseSurvey):
+    """
+        Survey class for MT. Contains all the sources associated with the survey.
+
+        :param list srcList: List of sources associated with the survey
+
+    """
+    srcPair = SrcMT.BaseMTSrc
+
+    def __init__(self, srcList, **kwargs):
+        # Sort these by frequency
+        self.srcList = srcList
+        SimPEGsurvey.BaseSurvey.__init__(self, **kwargs)
+
+        _freqDict = {}
+        for src in srcList:
+            if src.freq not in _freqDict:
+                _freqDict[src.freq] = []
+            _freqDict[src.freq] += [src]
+
+        self._freqDict = _freqDict
+        self._freqs = sorted([f for f in self._freqDict])
+
+    @property
+    def freqs(self):
+        """Frequencies"""
+        return self._freqs
+
+    @property
+    def nFreq(self):
+        """Number of frequencies"""
+        return len(self._freqDict)
+
+    # TODO: Rename to getSources
+    def getSrcByFreq(self, freq):
+        """Returns the sources associated with a specific frequency."""
+        assert freq in self._freqDict, "The requested frequency is not in this survey."
+        return self._freqDict[freq]
+
+    def eval(self, f):
+        data = Data(self)
+        for src in self.srcList:
+            sys.stdout.flush()
+            for rx in src.rxList:
+                data[src, rx] = rx.eval(src, self.mesh, f)
+        return data
+
+    def evalDeriv(self, f):
+        raise Exception('Use Transmitters to project fields deriv.')
+
+#################
+###   Data    ###
+#################
+class Data(SimPEGsurvey.Data):
+    '''
+    Data class for MTdata. Stores the data vector indexed by the survey.
+
+    :param SimPEG survey object survey:
+    :param v vector of the data in order matching of the survey
+
+
+    '''
+    def __init__(self, survey, v=None):
+        # Pass the variables to the "parent" method
+        SimPEGsurvey.Data.__init__(self, survey, v)
+
+    # # Import data
+    # @classmethod
+    # def fromEDIFiles():
+    #     pass
+
+    def toRecArray(self,returnType='RealImag'):
+        '''
+        Function that returns a numpy.recarray for a SimpegMT impedance data object.
+
+        :param str returnType: Switches between returning a rec array where the impedance is split to real and imaginary ('RealImag') or is a complex ('Complex')
+
+        '''
+
+        # Define the record fields
+        dtRI = [('freq',float),('x',float),('y',float),('z',float),('zxxr',float),('zxxi',float),('zxyr',float),('zxyi',float),
+        ('zyxr',float),('zyxi',float),('zyyr',float),('zyyi',float),('tzxr',float),('tzxi',float),('tzyr',float),('tzyi',float)]
+        dtCP = [('freq',float),('x',float),('y',float),('z',float),('zxx',complex),('zxy',complex),('zyx',complex),('zyy',complex),('tzx',complex),('tzy',complex)]
+        impList = ['zxxr','zxxi','zxyr','zxyi','zyxr','zyxi','zyyr','zyyi']
+        for src in self.survey.srcList:
+            # Temp array for all the receivers of the source.
+            # Note: needs to be written more generally, using diffterent rxTypes and not all the data at the locaitons
+            # Assume the same locs for all RX
+            locs = src.rxList[0].locs
+            if locs.shape[1] == 1:
+                locs = np.hstack((np.array([[0.0,0.0]]),locs))
+            elif locs.shape[1] == 2:
+                locs = np.hstack((np.array([[0.0]]),locs))
+            tArrRec = np.concatenate((src.freq*np.ones((locs.shape[0],1)),locs,np.nan*np.ones((locs.shape[0],12))),axis=1).view(dtRI)
+            # np.array([(src.freq,rx.locs[0,0],rx.locs[0,1],rx.locs[0,2],np.nan ,np.nan ,np.nan ,np.nan ,np.nan ,np.nan ,np.nan ,np.nan ) for rx in src.rxList],dtype=dtRI)
+            # Get the type and the value for the DataMT object as a list
+            typeList = [[rx.rxType.replace('z1d','zyx'),self[src,rx]] for rx in src.rxList]
+            # Insert the values to the temp array
+            for nr,(key,val) in enumerate(typeList):
+                tArrRec[key] = mkvc(val,2)
+            # Masked array
+            mArrRec = np.ma.MaskedArray(rec2ndarr(tArrRec),mask=np.isnan(rec2ndarr(tArrRec))).view(dtype=tArrRec.dtype)
+            # Unique freq and loc of the masked array
+            uniFLmarr = np.unique(mArrRec[['freq','x','y','z']]).copy()
+
+            try:
+                outTemp = recFunc.stack_arrays((outTemp,mArrRec))
+                #outTemp = np.concatenate((outTemp,dataBlock),axis=0)
+            except NameError as e:
+                outTemp = mArrRec
+
+            if 'RealImag' in returnType:
+                outArr = outTemp
+            elif 'Complex' in returnType:
+                # Add the real and imaginary to a complex number
+                outArr = np.empty(outTemp.shape,dtype=dtCP)
+                for comp in ['freq','x','y','z']:
+                    outArr[comp] = outTemp[comp].copy()
+                for comp in ['zxx','zxy','zyx','zyy','tzx','tzy']:
+                    outArr[comp] = outTemp[comp+'r'].copy() + 1j*outTemp[comp+'i'].copy()
+            else:
+                raise NotImplementedError('{:s} is not implemented, as to be RealImag or Complex.')
+
+        # Return
+        return outArr
+
+    @classmethod
+    def fromRecArray(cls, recArray, srcType='primary'):
+        """
+        Class method that reads in a numpy record array to MTdata object.
+
+        Only imports the impedance data.
+
+        """
+        if srcType=='primary':
+            src = SrcMT.polxy_1Dprimary
+        elif srcType=='total':
+            src = SrcMT.polxy_1DhomotD
+        else:
+            raise NotImplementedError('{:s} is not a valid source type for MTdata')
+
+        # Find all the frequencies in recArray
+        uniFreq = np.unique(recArray['freq'])
+        srcList = []
+        dataList = []
+        for freq in uniFreq:
+            # Initiate rxList
+            rxList = []
+            # Find that data for freq
+            dFreq = recArray[recArray['freq'] == freq].copy()
+            # Find the impedance rxTypes in the recArray.
+            rxTypes = [ comp for comp in recArray.dtype.names if (len(comp)==4 or len(comp)==3) and 'z' in comp]
+            for rxType in rxTypes:
+                # Find index of not nan values in rxType
+                notNaNind = ~np.isnan(dFreq[rxType])
+                if np.any(notNaNind): # Make sure that there is any data to add.
+                    locs = rec2ndarr(dFreq[['x','y','z']][notNaNind].copy())
+                    if dFreq[rxType].dtype.name in 'complex128':
+                        rxList.append(Rx(locs,rxType+'r'))
+                        dataList.append(dFreq[rxType][notNaNind].real.copy())
+                        rxList.append(Rx(locs,rxType+'i'))
+                        dataList.append(dFreq[rxType][notNaNind].imag.copy())
+                    else:
+                        rxList.append(Rx(locs,rxType))
+                        dataList.append(dFreq[rxType][notNaNind].copy())
+            srcList.append(src(rxList,freq))
+
+        # Make a survey
+        survey = Survey(srcList)
+        dataVec = np.hstack(dataList)
+        return cls(survey,dataVec)
+

SimPEG/MT/Utils/MT1Danalytic.py

@@ -0,0 +1,108 @@
+# Analytic solution of EM fields due to a plane wave
+
+import numpy as np, SimPEG as simpeg
+from scipy.constants import mu_0, epsilon_0 as eps_0
+
+def getEHfields(m1d,sigma,freq,zd,scaleUD=True):
+    '''Analytic solution for MT 1D layered earth. Returns E and H fields.
+
+    :param SimPEG.mesh, object m1d: Mesh object with the 1D spatial information.
+    :param numpy.array, vector sigma: Physical property of conductivity corresponding with the mesh.
+    :param float, freq: Frequency to calculate data at.
+    :param numpy array, vector zd: location to calculate EH fields at
+    :param bollean, scaleUD: scales the output to be 1 at the top, increases numeracal stability.
+
+    Assumes a halfspace with the same conductive as the last cell below.
+
+    '''
+    # Note add an error check for the mesh and sigma are the same size.
+
+    # Constants: Assume constant
+    mu = mu_0*np.ones((m1d.nC+1))
+    eps = eps_0*np.ones((m1d.nC+1))
+    # Angular freq
+    w = 2*np.pi*freq
+    # Add the halfspace value to the property
+    sig = np.concatenate((np.array([sigma[0]]),sigma))
+    # Calculate the wave number
+    k = np.sqrt(eps*mu*w**2-1j*mu*sig*w)
+
+    # Initiate the propagation matrix, in the order down up.
+    UDp = np.zeros((2,m1d.nC+1),dtype=complex)
+    UDp[1,0] = 1. # Set the wave amplitude as 1 into the half-space at the bottom of the mesh
+    # Loop over all the layers, starting at the bottom layer
+    for lnr, h in enumerate(m1d.hx): # lnr-number of layer, h-thickness of the layer
+        # Calculate
+        yp1 = k[lnr]/(w*mu[lnr]) # Admittance of the layer below the current layer
+        zp = (w*mu[lnr+1])/k[lnr+1] # Impedance in the current layer
+        # Build the propagation matrix
+
+        # Convert fields to down/up going components in layer below current layer
+        Pj1 = np.array([[1,1],[yp1,-yp1]])
+        # Convert fields to down/up going components in current layer
+        Pjinv = 1./2*np.array([[1,zp],[1,-zp]])
+        # Propagate down and up components through the current layer
+        elamh = np.array([[np.exp(-1j*k[lnr+1]*h),0],[0,np.exp(1j*k[lnr+1]*h)]])
+
+        # The down and up component in current layer.
+        UDp[:,lnr+1] = elamh.dot(Pjinv.dot(Pj1)).dot(UDp[:,lnr])
+
+        if scaleUD:
+             UDp[:,lnr+1::-1] = UDp[:,lnr+1::-1]/UDp[1,lnr+1]
+
+    # Calculate the fields
+    Ed = np.empty((zd.size,),dtype=complex)
+    Eu = np.empty((zd.size,),dtype=complex)
+    Hd = np.empty((zd.size,),dtype=complex)
+    Hu = np.empty((zd.size,),dtype=complex)
+
+    # Loop over the layers and calculate the fields
+    # In the halfspace below the mesh
+    dup = m1d.vectorNx[0]
+    dind = dup >= zd
+    Ed[dind] = UDp[1,0]*np.exp(-1j*k[0]*(dup-zd[dind]))
+    Eu[dind] = UDp[0,0]*np.exp(1j*k[0]*(dup-zd[dind]))
+    Hd[dind] = (k[0]/(w*mu[0]))*UDp[1,0]*np.exp(-1j*k[0]*(dup-zd[dind]))
+    Hu[dind] = -(k[0]/(w*mu[0]))*UDp[0,0]*np.exp(1j*k[0]*(dup-zd[dind]))
+    for ki,mui,epsi,dlow,dup,Up,Dp in zip(k[1::],mu[1::],eps[1::],m1d.vectorNx[:-1],m1d.vectorNx[1::],UDp[0,1::],UDp[1,1::]):
+        dind = np.logical_and(dup >= zd, zd > dlow)
+        Ed[dind] = Dp*np.exp(-1j*ki*(dup-zd[dind]))
+        Eu[dind] = Up*np.exp(1j*ki*(dup-zd[dind]))
+        Hd[dind] = (ki/(w*mui))*Dp*np.exp(-1j*ki*(dup-zd[dind]))
+        Hu[dind] = -(ki/(w*mui))*Up*np.exp(1j*ki*(dup-zd[dind]))
+
+    # Return return the fields
+    return Ed, Eu, Hd, Hu
+
+def getImpedance(m1d,sigma,freq):
+    """Analytic solution for MT 1D layered earth. Returns the impedance at the surface.
+
+    :param SimPEG.mesh, object m1d: Mesh object with the 1D spatial information.
+    :param numpy.array, vector sigma: Physical property corresponding with the mesh.
+    :param numpy.array, vector freq: Frequencies to calculate data at.
+
+
+    """
+
+    # Initiate the impedances
+    Z1d = np.empty(len(freq) , dtype='complex')
+    h = m1d.hx   #vectorNx[:-1]
+    # Start the process
+    for nrFr, fr in enumerate(freq):
+        om = 2*np.pi*fr
+        Zall = np.empty(len(h)+1,dtype='complex')
+        # Calculate the impedance for the bottom layer
+        Zall[0] = (mu_0*om)/np.sqrt(mu_0*eps_0*(om)**2 - 1j*mu_0*sigma[0]*om)
+
+        for nr,hi in enumerate(h):
+            # Calculate the wave number
+            # print nr,sigma[nr]
+            k = np.sqrt(mu_0*eps_0*om**2 - 1j*mu_0*sigma[nr]*om)
+            Z = (mu_0*om)/k
+
+            Zall[nr+1] = Z *((Zall[nr] + Z*np.tanh(1j*k*hi))/(Z + Zall[nr]*np.tanh(1j*k*hi)))
+
+        #pdb.set_trace()
+        Z1d[nrFr] = Zall[-1]
+
+    return Z1d

SimPEG/MT/Utils/MT1Dsolutions.py

@@ -0,0 +1,45 @@
+import numpy as np, SimPEG as simpeg
+from MT1Danalytic import getEHfields
+from scipy.constants import mu_0
+
+def get1DEfields(m1d,sigma,freq,sourceAmp=1.0):
+    """Function to get 1D electrical fields"""
+
+    # Get the gradient
+    G = m1d.nodalGrad
+    # Mass matrices
+    # Magnetic permeability
+    Mmu = simpeg.Utils.sdiag(m1d.vol*(1.0/mu_0))
+    # Conductivity
+    Msig = m1d.getFaceInnerProduct(sigma)
+    # Set up the solution matrix
+    A = G.T*Mmu*G + 1j*2.*np.pi*freq*Msig
+    # Define the inner part of the solution matrix
+    Aii = A[1:-1,1:-1]
+    # Define the outer part of the solution matrix
+    Aio = A[1:-1,[0,-1]]
+
+    # Set the boundary conditions
+    Ed, Eu, Hd, Hu = getEHfields(m1d,sigma,freq,m1d.vectorNx)
+    Etot = (Ed + Eu)
+    if sourceAmp is not None:
+        Etot = ((Etot/Etot[-1])*sourceAmp) # Scale the fields to be equal to sourceAmp at the top
+    ## Note: The analytic solution is derived with e^iwt
+    bc = np.r_[Etot[0],Etot[-1]]
+    # The right hand side
+    rhs = Aio*bc
+    # Solve the system
+    Aii_inv = simpeg.Solver(Aii)
+    eii = Aii_inv*rhs
+    # Assign the boundary conditions
+    e = np.r_[bc[0],eii,bc[1]]
+    # Return the electrical fields
+    return e
+
+
+if __name__ == '__main__':
+
+    hz = [(100.,18)]
+    M = simpeg.Mesh.TensorMesh([hz],'C')
+    sig = np.zeros(M.nC) + 1e-8
+    sig[M.vectorCCx<=0] = sigHalf

SimPEG/MT/Utils/__init__.py

@@ -0,0 +1,4 @@
+from MT1Dsolutions import *  # Add the names of the functions
+from MT1Danalytic import *
+from dataUtils import *
+from ediFilesUtils import *

SimPEG/MT/Utils/dataUtils.py

@@ -0,0 +1,245 @@
+# Utils used for the data,
+import numpy as np, matplotlib.pyplot as plt, sys
+import SimPEG as simpeg
+import numpy.lib.recfunctions as recFunc
+from scipy.constants import mu_0
+from scipy import interpolate as sciint
+
+def getAppRes(MTdata):
+    # Make impedance
+    zList = []
+    for src in MTdata.survey.srcList:
+        zc = [src.freq]
+        for rx in src.rxList:
+            if 'i' in rx.rxType:
+                m=1j
+            else:
+                m = 1
+            zc.append(m*MTdata[src,rx])
+        zList.append(zc)
+    return [appResPhs(zList[i][0],np.sum(zList[i][1:3])) for i in np.arange(len(zList))]
+
+def rotateData(MTdata,rotAngle):
+    '''
+    Function that rotates clockwist by rotAngle (- negative for a counter-clockwise rotation)
+    '''
+    recData = MTdata.toRecArray('Complex')
+    impData = rec2ndarr(recData[['zxx','zxy','zyx','zyy']],complex)
+    # Make the rotation matrix
+    # c,s,zxx,zxy,zyx,zyy = sympy.symbols('c,s,zxx,zxy,zyx,zyy')
+    # rotM = sympy.Matrix([[c,-s],[s, c]])
+    # zM = sympy.Matrix([[zxx,zxy],[zyx,zyy]])
+    # rotM*zM*rotM.T
+    # [c*(c*zxx - s*zyx) - s*(c*zxy - s*zyy), c*(c*zxy - s*zyy) + s*(c*zxx - s*zyx)],
+    # [c*(c*zyx + s*zxx) - s*(c*zyy + s*zxy), c*(c*zyy + s*zxy) + s*(c*zyx + s*zxx)]])
+    s = np.sin(-np.deg2rad(rotAngle))
+    c = np.cos(-np.deg2rad(rotAngle))
+    rotMat = np.array([[c,-s],[s,c]])
+    rotData = (rotMat.dot(impData.reshape(-1,2,2).dot(rotMat.T))).transpose(1,0,2).reshape(-1,4)
+    outRec = recData.copy()
+    for nr,comp in enumerate(['zxx','zxy','zyx','zyy']):
+        outRec[comp] = rotData[:,nr]
+
+    from SimPEG import MT
+    return MT.Data.fromRecArray(outRec)
+
+
+def appResPhs(freq,z):
+    app_res = ((1./(8e-7*np.pi**2))/freq)*np.abs(z)**2
+    app_phs = np.arctan2(z.imag,z.real)*(180/np.pi)
+    return app_res, app_phs
+
+def skindepth(rho,freq):
+    ''' Function to calculate the skindepth of EM waves'''
+    return np.sqrt( (rho*((1/(freq * mu_0 * np.pi )))))
+
+def rec2ndarr(x,dt=float):
+    return x.view((dt, len(x.dtype.names)))
+
+def makeAnalyticSolution(mesh,model,elev,freqs):
+    from SimPEG import MT
+    data1D = []
+    for freq in freqs:
+        anaEd, anaEu, anaHd, anaHu = MT.Utils.MT1Danalytic.getEHfields(mesh,model,freq,elev)
+        anaE = anaEd+anaEu
+        anaH = anaHd+anaHu
+
+        anaZ = anaE/anaH
+        # Add to the list
+        data1D.append((freq,0,0,elev,anaZ[0]))
+    dataRec = np.array(data1D,dtype=[('freq',float),('x',float),('y',float),('z',float),('zyx',complex)])
+    return dataRec
+
+def plotMT1DModelData(problem,models,symList=None):
+    from SimPEG import MT
+    # Setup the figure
+    fontSize = 15
+
+    fig = plt.figure(figsize=[9,7])
+    axM = fig.add_axes([0.075,.1,.25,.875])
+    axM.set_xlabel('Resistivity [Ohm*m]',fontsize=fontSize)
+    axM.set_xlim(1e-1,1e5)
+    axM.set_ylim(-10000,5000)
+    axM.set_ylabel('Depth [km]',fontsize=fontSize)
+    axR = fig.add_axes([0.42,.575,.5,.4])
+    axR.set_xscale('log')
+    axR.set_yscale('log')
+    axR.invert_xaxis()
+    # axR.set_xlabel('Frequency [Hz]')
+    axR.set_ylabel('Apparent resistivity [Ohm m]',fontsize=fontSize)
+
+    axP = fig.add_axes([0.42,.1,.5,.4])
+    axP.set_xscale('log')
+    axP.invert_xaxis()
+    axP.set_ylim(0,90)
+    axP.set_xlabel('Frequency [Hz]',fontsize=fontSize)
+    axP.set_ylabel('Apparent phase [deg]',fontsize=fontSize)
+
+    # if not symList:
+    #   symList = ['x']*len(models)
+    import plotDataTypes as pDt
+    # Loop through the models.
+    modelList = [problem.survey.mtrue]
+    modelList.extend(models)
+    if False:
+        modelList = [problem.mapping.sigmaMap*mod for mod in modelList]
+    for nr, model in enumerate(modelList):
+        # Calculate the data
+        if nr==0:
+            data1D = problem.dataPair(problem.survey,problem.survey.dobs).toRecArray('Complex')
+        else:
+            data1D = problem.dataPair(problem.survey,problem.survey.dpred(model)).toRecArray('Complex')
+        # Plot the data and the model
+        colRat = nr/((len(modelList)-1.999)*1.)
+        if colRat > 1.:
+            col = 'k'
+        else:
+            col = plt.cm.seismic(1-colRat)
+        # The model - make the pts to plot
+        meshPts = np.concatenate((problem.mesh.gridN[0:1],np.kron(problem.mesh.gridN[1::],np.ones(2))[:-1]))
+        modelPts = np.kron(1./(problem.mapping.sigmaMap*model),np.ones(2,))
+        axM.semilogx(modelPts,meshPts,color=col)
+
+        ## Data
+        # Appres
+        pDt.plotIsoStaImpedance(axR,np.array([0,0]),data1D,'zyx','res',pColor=col)
+        # Appphs
+        pDt.plotIsoStaImpedance(axP,np.array([0,0]),data1D,'zyx','phs',pColor=col)
+        try:
+            allData = np.concatenate((allData,simpeg.mkvc(data1D['zyx'],2)),1)
+        except:
+            allData = simpeg.mkvc(data1D['zyx'],2)
+    freq = simpeg.mkvc(data1D['freq'],2)
+    res, phs = appResPhs(freq,allData)
+
+    stdCol = 'gray'
+    axRtw = axR.twinx()
+    axRtw.set_ylabel('Std of log10',color=stdCol)
+    [(t.set_color(stdCol), t.set_rotation(-45)) for t in axRtw.get_yticklabels()]
+    axPtw = axP.twinx()
+    axPtw.set_ylabel('Std ',color=stdCol)
+    [t.set_color(stdCol) for t in axPtw.get_yticklabels()]
+    axRtw.plot(freq, np.std(np.log10(res),1),'--',color=stdCol)
+    axPtw.plot(freq, np.std(phs,1),'--',color=stdCol)
+
+    # Fix labels and ticks
+
+    yMtick = [l/1000 for l in axM.get_yticks().tolist()]
+    axM.set_yticklabels(yMtick)
+    [ l.set_rotation(90) for l in axM.get_yticklabels()]
+    [ l.set_rotation(90) for l in axR.get_yticklabels()]
+    [(t.set_color(stdCol), t.set_rotation(-45)) for t in axRtw.get_yticklabels()]
+    [t.set_color(stdCol) for t in axPtw.get_yticklabels()]
+    for ax in [axM,axR,axP]:
+        ax.xaxis.set_tick_params(labelsize=fontSize)
+        ax.yaxis.set_tick_params(labelsize=fontSize)
+    return fig
+
+def printTime():
+    import time
+    print time.strftime("%a, %d %b %Y %H:%M:%S +0000", time.localtime())
+
+def convert3Dto1Dobject(MTdata,rxType3D='zyx'):
+    from SimPEG import MT
+    # Find the unique locations
+    # Need to find the locations
+    recDataTemp = MTdata.toRecArray()
+    # Check if survey.std has been assigned.
+    ## NEED TO: write this...
+    # Calculte and add the DET of the tensor to the recArray
+    if 'det' in rxType3D:
+        Zon = (recDataTemp['zxxr']+1j*recDataTemp['zxxi'])*(recDataTemp['zyyr']+1j*recDataTemp['zyyi'])
+        Zoff = (recDataTemp['zxyr']+1j*recDataTemp['zxyi'])*(recDataTemp['zyxr']+1j*recDataTemp['zyxi'])
+        det = np.sqrt(Zon.data - Zoff.data)
+        recData = recFunc.append_fields(recDataTemp,['zdetr','zdeti'],[det.real,det.imag] )
+    else:
+        recData = recDataTemp
+
+    uniLocs = rec2ndarr(np.unique(recData[['x','y','z']])).data
+    mtData1DList = []
+    if 'zxy' in rxType3D:
+        corr = -1 # Shift the data to comply with the quadtrature of the 1d problem
+    else:
+        corr = 1
+    for loc in uniLocs:
+        # Make the receiver list
+        rx1DList = []
+        for rxType in ['z1dr','z1di']:
+            rx1DList.append(MT.Rx(simpeg.mkvc(loc,2).T,rxType))
+        # Source list
+        locrecData = recData[np.sqrt(np.sum( (rec2ndarr(recData[['x','y','z']]).data - loc )**2,axis=1)) < 1e-5]
+        dat1DList = []
+        src1DList = []
+        for freq in locrecData['freq']:
+            src1DList.append(MT.SrcMT.src_polxy_1Dprimary(rx1DList,freq))
+            for comp  in ['r','i']:
+                dat1DList.append( corr * locrecData[rxType3D+comp][locrecData['freq']== freq].data )
+
+        # Make the survey
+        sur1D = MT.Survey(src1DList)
+
+        # Make the data
+        dataVec = np.hstack(dat1DList)
+        dat1D = MT.Data(sur1D,dataVec)
+        sur1D.dobs = dataVec
+        # Need to take MTdata.survey.std and split it as well.
+        std=0.05
+        sur1D.std =  np.abs(sur1D.dobs*std) #+ 0.01*np.linalg.norm(sur1D.dobs)
+        mtData1DList.append(dat1D)
+
+    # Return the the list of data.
+    return mtData1DList
+
+def resampleMTdataAtFreq(MTdata,freqs):
+    """
+    Function to resample MTdata at set of frequencies
+
+    """
+    from SimPEG import MT
+    # Make a rec array
+    MTrec = MTdata.toRecArray().data
+
+    # Find unique locations
+    uniLoc = np.unique(MTrec[['x','y','z']])
+    uniFreq = MTdata.survey.freqs
+    # Get the comps
+    dNames = MTrec.dtype
+
+    # Loop over all the locations and interpolate
+    for loc in uniLoc:
+        # Find the index of the station
+        ind = np.sqrt(np.sum((rec2ndarr(MTrec[['x','y','z']]) - rec2ndarr(loc))**2,axis=1)) < 1. # Find dist of 1 m accuracy
+        # Make a temporary recArray and interpolate all the components
+        tArrRec = np.concatenate((simpeg.mkvc(freqs,2),np.ones((len(freqs),1))*rec2ndarr(loc),np.nan*np.ones((len(freqs),12))),axis=1).view(dNames)
+        for comp in ['zxxr','zxxi','zxyr','zxyi','zyxr','zyxi','zyyr','zyyi','tzxr','tzxi','tzyr','tzyi']:
+            int1d = sciint.interp1d(MTrec[ind]['freq'],MTrec[ind][comp],bounds_error=False)
+            tArrRec[comp] = simpeg.mkvc(int1d(freqs),2)
+
+        # Join together
+        try:
+            outRecArr = recFunc.stack_arrays((outRecArr,tArrRec))
+        except NameError as e:
+            outRecArr = tArrRec
+
+    # Make the MTdata and return
+    return MT.Data.fromRecArray(outRecArr)

SimPEG/MT/Utils/ediFilesUtils.py

@@ -0,0 +1,180 @@
+# Functions to import and export MT EDI files.
+from SimPEG import mkvc
+from scipy.constants import mu_0
+from numpy.lib import recfunctions as recFunc
+from SimPEG.MT.Utils.dataUtils import rec2ndarr
+
+# Import modules
+import numpy as np
+import os, sys, re
+
+
+class EDIimporter:
+    """
+    A class to import EDIfiles.
+
+    """
+
+
+    # Define data converters
+    _impUnitEDI2SI = 4*np.pi*1e-4 # Convert Z[mV/km/nT] (as in EDI)to Z[V/A] SI unit
+    _impUnitSI2EDI = 1./_impUnitEDI2SI # ConvertZ[V/A] SI unit to Z[mV/km/nT] (as in EDI)
+
+    # Properties
+    filesList = None
+    comps = None
+
+    # Hidden properties
+    _outEPSG = None # Project info
+    _2out = None    # The projection operator
+
+
+    def __init__(self, EDIfilesList, compList=None, outEPSG=None):
+
+        # Set the fileList
+        self.filesList = EDIfilesList
+        # Set the components to import
+        if compList is None:
+            self.comps = ['ZXXR','ZXYR','ZYXR','ZYYR','ZXXI','ZXYI','ZYXI','ZYYI','ZXX.VAR','ZXY.VAR','ZYX.VAR','ZYY.VAR']
+        else:
+            self.comps = compList
+        if outEPSG is not None:
+            self._outEPSG = outEPSG
+
+    def __call__(self,comps=None):
+
+        if comps is None:
+            return self._data
+
+        return self._data[comps]
+
+    def importFiles(self):
+        """
+        Function to import EDI files into a object.
+
+
+        """
+
+        # Constants that are needed for convertion of units
+
+        # Temp lists
+        tmpStaList = []
+
+        tmpCompList = ['freq','x','y','z']
+        tmpCompList.extend(self.comps)
+        # Make the outarray
+        dtRI = [(compS.lower().replace('.',''),float) for compS in tmpCompList]
+        # Loop through all the files
+        for nrEDI, EDIfile in enumerate(self.filesList):
+            # Read the file into a list of the lines
+            with open(EDIfile,'r') as fid:
+                EDIlines = fid.readlines()
+            # Find the location
+            latD, longD, elevM = _findLatLong(EDIlines)
+            # Transfrom coordinates
+            transCoord = self._transfromPoints(longD,latD)
+            # Extract the name of the file (station)
+            EDIname = EDIfile.split(os.sep)[-1].split('.')[0]
+            # Arrange the data
+            staList = [EDIname, EDIfile, transCoord[0], transCoord[1], elevM[0]]
+            # Add to the station list
+            tmpStaList.extend(staList)
+
+            # Read the frequency data
+            freq = _findEDIcomp('>FREQ',EDIlines)
+            # Make the temporary rec array.
+            tArrRec = ( np.nan*np.ones( (len(freq),len(dtRI)) ) ).view(dtRI)     #np.concatenate((freq*np.ones((locs.shape[0],1)),locs,np.nan*np.ones((locs.shape[0],8))),axis=1).view(dtRI)
+            # Add data to the array
+            tArrRec['freq'] = mkvc(freq,2)
+            tArrRec['x'] = mkvc(np.ones((len(freq),1))*transCoord[0],2)
+            tArrRec['y'] = mkvc(np.ones((len(freq),1))*transCoord[1],2)
+            tArrRec['z'] = mkvc(np.ones((len(freq),1))*elevM[0],2)
+            for comp in self.comps:
+                # Deal with converting units of the impedance tensor
+                if 'Z' in comp:
+                    unitConvert = self._impUnitEDI2SI
+                else:
+                    unitConvert = 1
+                # Rotate the data since EDI x is *north, y *east but Simpeg uses x *east, y *north (* means internal reference frame)
+                key = [comp.lower().replace('.','').replace(s,t) for s,t in [['xx','yy'],['xy','yx'],['yx','xy'],['yy','xx']] if s in comp.lower()][0]
+                tArrRec[key] = mkvc(unitConvert*_findEDIcomp('>'+comp,EDIlines),2)
+            # Make a masked array
+            mArrRec = np.ma.MaskedArray(rec2ndarr(tArrRec),mask=np.isnan(rec2ndarr(tArrRec))).view(dtype=tArrRec.dtype)
+            try:
+                outTemp = recFunc.stack_arrays((outTemp,mArrRec))
+            except NameError as e:
+                outTemp = mArrRec
+
+        # Assign the data
+        self._data = outTemp
+
+    # % Assign the data to the obj
+    # nOutData=length(obj.data);
+    # obj.data(nOutData+1:nOutData+length(TEMP.data),:) = TEMP.data;
+    def _transfromPoints(self,longD,latD):
+        # Import the coordinate projections
+        try:
+            import osr
+        except ImportError as e:
+            print 'Could not import osr, missing the gdal package\nCan not project coordinates'
+            raise e
+        # Coordinates convertor
+        if self._2out is None:
+            src = osr.SpatialReference()
+            src.ImportFromEPSG(4326)
+            out = osr.SpatialReference()
+            if self._outEPSG is None:
+                # Find the UTM EPSG number
+                Nnr =  700 if latD < 0.0 else 600
+                utmZ = int(1+(longD+180.0)/6.0)
+                self._outEPSG = 32000 + Nnr + utmZ
+            out.ImportFromEPSG(self._outEPSG)
+            self._2out = osr.CoordinateTransformation(src,out)
+        # Return the transfrom
+        return self._2out.TransformPoint(longD,latD)
+
+# Hidden functions
+def _findLatLong(fileLines):
+    latDMS = np.array(fileLines[_findLine('LAT=',fileLines)[0]].split('=')[1].split()[0].split(':'),float)
+    longDMS = np.array(fileLines[_findLine('LONG=',fileLines)[0]].split('=')[1].split()[0].split(':'),float)
+    elevM = np.array([fileLines[_findLine('ELEV=',fileLines)[0]].split('=')[1].split()[0]],float)
+    # Convert to D.ddddd values
+    latS = np.sign(latDMS[0])
+    longS = np.sign(longDMS[0])
+    latD = latDMS[0] + latS*latDMS[1]/60 + latS*latDMS[2]/3600
+    longD = longDMS[0] + longS*longDMS[1]/60 + longS*longDMS[2]/3600
+    return latD, longD, elevM
+
+def _findLine(comp,fileLines):
+    """ Find a line number in the file"""
+    # Line counter
+    c = 0
+    # List of indices for found lines
+    found = []
+    # Loop through all the lines
+    for line in fileLines:
+        if comp in line:
+            # Append if found
+            found.append(c)
+        # Increse the counter
+        c += 1
+    # Return the found indices
+    return found
+
+def _findEDIcomp(comp,fileLines,dt=float):
+    """
+    Extract the data vector.
+
+    Returns a list of the data.
+    """
+    # Find the data
+    headLine, indHead = [(st,nr) for nr,st in enumerate(fileLines) if re.search(comp,st)][0]
+    # Extract the data
+    nrVec = int(headLine.split()[-1])
+    c = 0
+    dataList = []
+    while c < nrVec:
+        indHead += 1
+        dataList.extend(fileLines[indHead].split())
+        c = len(dataList)
+    return np.array(dataList,dt)

SimPEG/MT/Utils/plotDataTypes.py

@@ -0,0 +1,416 @@
+from matplotlib import pyplot as plt, colors, numpy as np
+
+
+def rec2nd(structArray):
+	""" Converts a structured/record array to ndarray to do operations on."""
+	return structArray.view((np.float,len(structArray.dtype.names)))
+
+def plotIsoFreqNSimpedance(ax,freq,array,flag,par='abs',colorbar=True,colorNorm='SymLog',cLevel=True,contour=True):
+
+	indUniFreq = np.where(freq==array['freq'])
+
+
+	x, y = array['x'][indUniFreq],array['y'][indUniFreq]
+	if par == 'abs':
+		zPlot = np.abs(array[flag][indUniFreq])
+		cmap = plt.get_cmap('OrRd_r')#seismic')
+		level = np.logspace(0,-5,31)
+		clevel = np.logspace(0,-4,5)
+		plotNorm = colors.LogNorm()
+	elif par == 'real':
+		zPlot = np.real(array[flag][indUniFreq])
+		cmap = plt.get_cmap('RdYlBu')
+		if cLevel:
+			level = np.concatenate((-np.logspace(0,-10,31),np.logspace(-10,0,31)))
+			clevel = np.concatenate((-np.logspace(0,-8,5),np.logspace(-8,0,5)))
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+		if colorNorm=='SymLog':
+			plotNorm = colors.SymLogNorm(1e-10,linscale=2)
+		else:
+			plotNorm = colors.Normalize()
+	elif par == 'imag':
+		zPlot = np.imag(array[flag][indUniFreq])
+		cmap = plt.get_cmap('RdYlBu')
+		level = np.concatenate((-np.logspace(0,-10,31),np.logspace(-10,0,31)))
+		clevel = np.concatenate((-np.logspace(0,-8,5),np.logspace(-8,0,5)))
+		plotNorm = colors.SymLogNorm(1e-10,linscale=2)		
+		if cLevel:
+			level = np.concatenate((-np.logspace(0,-10,31),np.logspace(-10,0,31)))
+			clevel = np.concatenate((-np.logspace(0,-8,5),np.logspace(-8,0,5)))
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+		if colorNorm=='SymLog':
+			plotNorm = colors.SymLogNorm(1e-10,linscale=2)
+		elif colorNorm=='Lin':
+			plotNorm = colors.Normalize()
+	if contour:
+		cs = ax.tricontourf(x,y,zPlot,levels=level,cmap=cmap,norm=plotNorm)#,extend='both')
+	else:
+		uniX,uniY = np.unique(x),np.unique(y)
+		X,Y = np.meshgrid(np.append(uniX-25,uniX[-1]+25),np.append(uniY-25,uniY[-1]+25))
+		cs = ax.pcolor(X,Y,np.reshape(zPlot,(len(uniY),len(uniX))),cmap=cmap,norm=plotNorm)
+	if colorbar:
+		plt.colorbar(cs,cax=ax.cax,ticks=clevel,format='%1.2e')
+		ax.set_title(flag+' '+par,fontsize=8)
+	return cs
+
+def plotIsoFreqNSDiff(ax,freq,arrayList,flag,par='abs',colorbar=True,cLevel=True,mask=None,contourLine=True,useLog=False):
+
+	indUniFreq0 = np.where(freq==arrayList[0]['freq'])
+	indUniFreq1 = np.where(freq==arrayList[1]['freq'])
+	seicmap = plt.get_cmap('RdYlBu')#seismic')
+	x, y = arrayList[0]['x'][indUniFreq0],arrayList[0]['y'][indUniFreq0]
+	if par == 'abs':
+		if useLog:
+			zPlot = (np.log10(np.abs(arrayList[0][flag][indUniFreq0])) - np.log10(np.abs(arrayList[1][flag][indUniFreq1])))/np.log10(np.abs(arrayList[1][flag][indUniFreq1]))
+		else:
+			zPlot = (np.abs(arrayList[0][flag][indUniFreq0]) - np.abs(arrayList[1][flag][indUniFreq1]))/np.abs(arrayList[1][flag][indUniFreq1])
+		if mask:
+			maskInd = np.logical_or(np.abs(arrayList[0][flag][indUniFreq0])< 1e-3,np.abs(arrayList[1][flag][indUniFreq1]) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		if cLevel:
+			level = np.arange(-200,201,10) 
+			clevel = np.arange(-200,201,25)
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+	elif par == 'real':
+		if useLog:
+			zPlot = (np.log10(np.real(arrayList[0][flag][indUniFreq0])) -np.log10(np.real(arrayList[1][flag][indUniFreq1])))/np.log10(np.abs((np.real(arrayList[1][flag][indUniFreq1]))))
+		else:
+			zPlot = (np.real(arrayList[0][flag][indUniFreq0]) -np.real(arrayList[1][flag][indUniFreq1]))/np.abs((np.real(arrayList[1][flag][indUniFreq1])))
+		if mask:
+			maskInd = np.logical_or(np.abs(np.real(arrayList[0][flag][indUniFreq0])) < 1e-3,np.abs(np.real(arrayList[1][flag][indUniFreq1])) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		if cLevel:
+			level = np.arange(-200,201,10) 
+			clevel = np.arange(-200,201,25)
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+	elif par == 'imag':
+		if useLog:
+			zPlot = (np.log10(np.imag(arrayList[0][flag][indUniFreq0])) -np.log10(np.imag(arrayList[1][flag][indUniFreq1])))/np.log10(np.abs((np.imag(arrayList[1][flag][indUniFreq1]))))
+		else:
+			zPlot = (np.imag(arrayList[0][flag][indUniFreq0]) -np.imag(arrayList[1][flag][indUniFreq1]))/np.abs((np.imag(arrayList[1][flag][indUniFreq1])))
+		if mask:
+			maskInd = np.logical_or(np.abs(np.imag(arrayList[0][flag][indUniFreq0])) < 1e-3,np.abs(np.imag(arrayList[1][flag][indUniFreq1])) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		if cLevel:
+			level = np.arange(-200,201,10) 
+			clevel = np.arange(-200,201,25)
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+	cs = ax.tricontourf(x,y,zPlot*100,levels=level*100,cmap=seicmap,extend='both') #,norm=colors.SymLogNorm(1e-2,linscale=2))
+	if contourLine:
+		csl = ax.tricontour(x,y,zPlot*100,levels=clevel*100,colors='k')
+		plt.clabel(csl, fontsize=7, inline=1,fmt='%1.1e',inline_spacing=10)
+	if colorbar:
+		cb = plt.colorbar(cs,cax=ax.cax,ticks=clevel*100,format='%1.1e')
+		for t in cb.ax.get_yticklabels():
+			t.set_rotation(60)
+			t.set_fontsize(8)
+
+	ax.set_title(flag+' '+par,fontsize=8)
+
+def plotIsoFreqNStipper(ax,freq,array,flag,par='abs',colorbar=True,colorNorm='SymLog',cLevel=True,contour=True):
+
+	indUniFreq = np.where(freq==array['freq'])
+
+	x, y = array['x'][indUniFreq],array['y'][indUniFreq]
+	if par == 'abs':
+		cmap = plt.get_cmap('OrRd_r')#seismic')
+		zPlot = np.abs(array[flag][indUniFreq])
+		if cLevel:
+			level = np.logspace(-4,0,33)
+			clevel = np.logspace(-4,0,5)
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+		if colorNorm=='SymLog':
+			plotNorm = colors.LogNorm()
+		else:
+			plotNorm = colors.Normalize()
+	elif par == 'real':
+		cmap = plt.get_cmap('RdYlBu')
+		zPlot = np.real(array[flag][indUniFreq])
+		if cLevel:
+			level = np.concatenate((-np.logspace(0,-4,33),np.logspace(-4,0,33)))
+			clevel = np.concatenate((-np.logspace(0,-4,5),np.logspace(-4,0,5)))
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+		if colorNorm=='SymLog':
+			plotNorm = colors.SymLogNorm(1e-4,linscale=2)
+		else:
+			plotNorm = colors.Normalize()
+	elif par == 'imag':
+		cmap = plt.get_cmap('RdYlBu')
+		zPlot = np.imag(array[flag][indUniFreq])
+		if cLevel:
+			level = np.concatenate((-np.logspace(0,-4,33),np.logspace(-4,0,33)))
+			clevel = np.concatenate((-np.logspace(0,-4,5),np.logspace(-4,0,5)))
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10)
+		if colorNorm=='SymLog':
+			plotNorm = colors.SymLogNorm(1e-4,linscale=2)
+		else:
+			plotNorm = colors.Normalize()
+	if contour:
+		cs = ax.tricontourf(x,y,zPlot,levels=level,cmap=cmap,norm=plotNorm)#,extend='both')
+	else:
+		uniX,uniY = np.unique(x),np.unique(y)
+		X,Y = np.meshgrid(np.append(uniX-25,uniX[-1]+25),np.append(uniY-25,uniY[-1]+25))
+		cs = ax.pcolor(X,Y,np.reshape(zPlot,(len(uniY),len(uniX))),levels=level,cmap=cmap,norm=plotNorm,edgecolors='k', linewidths=0.5)
+	if colorbar:
+		plt.colorbar(cs,cax=ax.cax,ticks=clevel,format='%1.2e')
+	ax.set_title(flag+' '+par,fontsize=8)
+
+def plotIsoStaImpedance(ax,loc,array,flag,par='abs',pSym='s',pColor=None):	
+	
+	appResFact = 1/(8*np.pi**2*10**(-7))
+	treshold = 1.0 # 1 meter
+	indUniSta = np.sqrt(np.sum((rec2nd(array[['x','y']])-loc)**2,axis=1)) < treshold
+	freq = array['freq'][indUniSta]
+	
+	if par == 'abs':
+		zPlot = np.abs(array[flag][indUniSta])
+	elif par == 'real':
+		zPlot = np.real(array[flag][indUniSta])
+	elif par == 'imag':
+		zPlot = np.imag(array[flag][indUniSta])
+	elif par == 'res':
+		zPlot = (appResFact/freq)*np.abs(array[flag][indUniSta])**2
+	elif par == 'phs':
+		zPlot = np.arctan2(array[flag][indUniSta].imag,array[flag][indUniSta].real)*(180/np.pi)
+
+	if not pColor:
+		if 'xx' in flag:
+			lab = 'XX'
+			pColor = 'g'
+		elif 'xy' in flag:
+			lab = 'XY'
+			pColor = 'r'	
+		elif 'yx' in flag:
+			lab = 'YX'
+			pColor = 'b'
+		elif 'yy' in flag:
+			lab = 'YY'
+			pColor = 'y'
+
+	ax.plot(freq,zPlot,color=pColor,marker=pSym,label=flag)
+	
+
+def plotPsudoSectNSimpedance(ax,sectDict,array,flag,par='abs',colorbar=True,colorNorm='None',cLevel=None,contour=True):
+
+	indSect = np.where(sectDict.values()[0]==array[sectDict.keys()[0]])
+
+	# Define the plot axes
+	if 'x' in sectDict.keys()[0]:
+		x = array['y'][indSect]
+	else:
+		x = array['x'][indSect]
+	y = array['freq'][indSect]
+
+	if par == 'abs':
+		zPlot = np.abs(array[flag][indSect])
+		cmap = plt.get_cmap('OrRd_r')#seismic')
+		if cLevel:
+			level = np.logspace(0,-5,31,endpoint=True)
+			clevel = np.logspace(0,-4,5,endpoint=True)
+		else:
+			level = np.linspace(zPlot.min(),zPlot.max(),100,endpoint=True)
+			clevel = np.linspace(zPlot.min(),zPlot.max(),10,endpoint=True)
+		
+	elif par == 'ares':	
+		zPlot = np.abs(array[flag][indSect])**2/(8*np.pi**2*10**(-7)*array['freq'][indSect])
+		cmap = plt.get_cmap('RdYlBu')#seismic)
+		if cLevel:
+			zMax = np.log10(cLevel[1])
+			zMin = np.log10(cLevel[0])
+		else:
+			zMax = (np.ceil(np.log10(np.abs(zPlot).max())))
+			zMin = (np.floor(np.log10(np.abs(zPlot).min())))
+		level = np.logspace(zMin,zMax,(zMax-zMin)*8+1,endpoint=True)
+		clevel = np.logspace(zMin,zMax,(zMax-zMin)*2+1,endpoint=True)
+		plotNorm = colors.LogNorm()
+
+	elif par == 'aphs':
+		zPlot = np.arctan2(array[flag][indSect].imag,array[flag][indSect].real)*(180/np.pi)
+		cmap = plt.get_cmap('RdYlBu')#seismic)
+		if cLevel:
+			zMax = cLevel[1]
+			zMin = cLevel[0]
+		else:
+			zMax = (np.ceil(zPlot).max())
+			zMin = (np.floor(zPlot).min())
+		level = np.arange(zMin,zMax+.1,1)
+		clevel = np.arange(zMin,zMax+.1,10)
+		plotNorm = colors.Normalize()
+
+	elif par == 'real':
+		zPlot = np.real(array[flag][indSect])
+		cmap = plt.get_cmap('Spectral') #('RdYlBu')
+		if cLevel:
+			zMax = np.log10(cLevel[1])
+			zMin = np.log10(cLevel[0])
+		else:
+			zMax = (np.ceil(np.log10(np.abs(zPlot).max())))
+			zMin = (np.floor(np.log10(np.abs(zPlot).min())))
+		level = np.concatenate((-np.logspace(zMax,zMin-.125,(zMax-zMin)*8+1,endpoint=True),np.logspace(zMin-.125,zMax,(zMax-zMin)*8+1,endpoint=True)))
+		clevel = np.concatenate((-np.logspace(zMax,zMin,(zMax-zMin)*1+1,endpoint=True),np.logspace(zMin,zMax,(zMax-zMin)*1+1,endpoint=True)))
+		plotNorm = colors.SymLogNorm(np.abs(level).min(),linscale=0.1)
+	elif par == 'imag':
+		zPlot = np.imag(array[flag][indSect])
+		cmap = plt.get_cmap('Spectral') #('RdYlBu')
+		
+		if cLevel:
+			zMax = np.log10(cLevel[1])
+			zMin = np.log10(cLevel[0])
+		else:
+			zMax = (np.ceil(np.log10(np.abs(zPlot).max())))
+			zMin = (np.floor(np.log10(np.abs(zPlot).min())))
+		level = np.concatenate((-np.logspace(zMax,zMin-.125,(zMax-zMin)*8+1,endpoint=True),np.logspace(zMin-.125,zMax,(zMax-zMin)*8+1,endpoint=True)))
+		clevel = np.concatenate((-np.logspace(zMax,zMin,(zMax-zMin)*1+1,endpoint=True),np.logspace(zMin,zMax,(zMax-zMin)*1+1,endpoint=True)))
+		plotNorm = colors.SymLogNorm(np.abs(level).min(),linscale=0.1)
+	
+	if colorNorm=='SymLog':
+		plotNorm = colors.SymLogNorm(np.abs(level).min(),linscale=0.1)
+	elif colorNorm=='Lin':
+		plotNorm = colors.Normalize()
+	elif colorNorm=='Log':
+		plotNorm = colors.LogNorm()
+	if contour:
+		cs = ax.tricontourf(x,y,zPlot,levels=level,cmap=cmap,norm=plotNorm)#,extend='both')
+	else:
+		uniX,uniY = np.unique(x),np.unique(y)
+		X,Y = np.meshgrid(np.append(uniX-25,uniX[-1]+25),np.append(uniY-25,uniY[-1]+25))
+		cs = ax.pcolor(X,Y,np.reshape(zPlot,(len(uniY),len(uniX))),cmap=cmap,norm=plotNorm)
+	if colorbar:
+		csB = plt.colorbar(cs,cax=ax.cax,ticks=clevel,format='%1.2e')
+		# csB.on_mappable_changed(cs)
+		ax.set_title(flag+' '+par,fontsize=8)
+		return cs, csB
+	return cs,None
+
+
+def plotPsudoSectNSDiff(ax,sectDict,arrayList,flag,par='abs',colorbar=True,colorNorm='SymLog',cLevel=None,contour=True,mask=None,useLog=False):
+
+	def sortInArr(arr):
+		return np.sort(arr,order=['freq','x','y','z'])
+	# Find the index for the slice
+	indSect0 = np.where(sectDict.values()[0]==arrayList[0][sectDict.keys()[0]])
+	indSect1 = np.where(sectDict.values()[0]==arrayList[1][sectDict.keys()[0]])
+	# Extract and sort the mats
+	arr0 = sortInArr(arrayList[0][indSect0])
+	arr1 = sortInArr(arrayList[1][indSect1])
+
+	# Define the plot axes
+	if 'x' in sectDict.keys()[0]:
+		x0 = arr0['y']
+		x1 = arr1['y']
+	else:
+		x0 = arr0['x']
+		x1 = arr1['x']
+	y0 = arr0['freq']
+	y1 = arr1['freq']
+	
+
+	if par == 'abs':
+		if useLog:
+			zPlot = (np.log10(np.abs(arr0[flag])) - np.log10(np.abs(arr1[flag])))/np.log10(np.abs(arr1[flag]))
+		else:
+			zPlot = (np.abs(arr0[flag]) - np.abs(arr1[flag]))/np.abs(arr1[flag])
+		if mask:
+			maskInd = np.logical_or(np.abs(arr0[flag])< 1e-3,np.abs(arr1[flag]) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		cmap = plt.get_cmap('RdYlBu')#seismic)
+	elif par == 'ares':
+		arF = 1/(8*np.pi**2*10**(-7))		
+		if useLog:
+			zPlot = (np.log10((arF/arr0['freq'])*np.abs(arr0[flag])**2) - np.log10((arF/arr1['freq'])*np.abs(arr1[flag])**2))/np.log10((arF/arr1['freq'])*np.abs(arr1[flag])**2)
+		else:
+			zPlot = ((arF/arr0['freq'])*np.abs(arr0[flag])**2 - (arF/arr1['freq'])*np.abs(arr1[flag])**2)/((arF/arr1['freq'])*np.abs(arr1[flag])**2)
+		if mask:
+			maskInd = np.logical_or(np.abs(arr0[flag])< 1e-3,np.abs(arr1[flag]) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		cmap = plt.get_cmap('Spectral')#seismic)
+	
+	elif par == 'aphs':
+		if useLog:
+			zPlot = (np.log10(np.arctan2(arr0[flag].imag,arr0[flag].real)*(180/np.pi)) - np.log10(np.arctan2(arr1[flag].imag,arr1[flag].real)*(180/np.pi)) )/np.log10(np.arctan2(arr1[flag].imag,arr1[flag].real)*(180/np.pi))
+		else:
+			zPlot = ( np.arctan2(arr0[flag].imag,arr0[flag].real)*(180/np.pi) - np.arctan2(arr1[flag].imag,arr1[flag].real)*(180/np.pi) )/(np.arctan2(arr1[flag].imag,arr1[flag].real)*(180/np.pi))
+		if mask:
+			maskInd = np.logical_or(np.abs(arr0[flag])< 1e-3,np.abs(arr1[flag]) < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		cmap = plt.get_cmap('Spectral')#seismic)
+	elif par == 'real':
+		if useLog:
+			zPlot = (np.log10(arr0[flag].real) - np.log10(arr1[flag].real))/np.log10(arr1[flag].real)
+		else:
+			zPlot = (arr0[flag].real - arr1[flag].real)/arr1[flag].real
+		if mask:
+			maskInd = np.logical_or(arr0[flag].real< 1e-3,arr1[flag].real < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		cmap = plt.get_cmap('Spectral') #('Spectral')
+		
+	elif par == 'imag':
+		if useLog:
+			zPlot = (np.log10(arr0[flag].imag) - np.log10(arr1[flag].imag))/np.log10(arr1[flag].imag)
+		else:
+			zPlot = (arr0[flag].imag - arr1[flag].imag)/arr1[flag].imag
+		if mask:
+			maskInd = np.logical_or(arr0[flag].imag< 1e-3,arr1[flag].imag < 1e-3)
+			zPlot = np.ma.array(zPlot)
+			zPlot[maskInd] = mask
+		cmap = plt.get_cmap('Spectral') #('RdYlBu')
+		
+	if cLevel:
+		zMax = np.log10(cLevel[1])
+		zMin = np.log10(cLevel[0])
+	else:
+		zMax = (np.ceil(np.log10(np.abs(zPlot).max())))
+		zMin = (np.floor(np.log10(np.abs(zPlot).min())))
+
+	
+	if colorNorm=='SymLog':
+		level = np.concatenate((-np.logspace(zMax,zMin-.125,(zMax-zMin)*8+1,endpoint=True),np.logspace(zMin-.125,zMax,(zMax-zMin)*8+1,endpoint=True)))
+		clevel = np.concatenate((-np.logspace(zMax,zMin,(zMax-zMin)*1+1,endpoint=True),np.logspace(zMin,zMax,(zMax-zMin)*1+1,endpoint=True)))
+		plotNorm = colors.SymLogNorm(np.abs(level).min(),linscale=0.1)
+	elif colorNorm=='Lin':
+		if cLevel:
+			level = np.arange(cLevel[0],cLevel[1]+.1,(cLevel[1] - cLevel[0])/50.) 
+			clevel = np.arange(cLevel[0],cLevel[1]+.1,(cLevel[1] - cLevel[0])/10.)
+		else:
+			level = np.arange(zPlot.min(),zPlot.max(),(zPlot.max() - zPlot.min())/50.)
+			clevel = np.arange(zPlot.min(),zPlot.max(),(zPlot.max() - zPlot.min())/10.)
+		plotNorm = colors.Normalize()
+	elif colorNorm=='Log':
+		level = np.logspace(zMin-.125,zMax,(zMax-zMin)*8+1,endpoint=True)
+		clevel = np.logspace(zMin,zMax,(zMax-zMin)*2+1,endpoint=True)
+		plotNorm = colors.LogNorm()
+	if contour:
+		cs = ax.tricontourf(x0,y0,zPlot*100,levels=level*100,cmap=cmap,norm=plotNorm,extend='both')#,extend='both')
+	else:
+		uniX,uniY = np.unique(x0),np.unique(y0)
+		X,Y = np.meshgrid(np.append(uniX-25,uniX[-1]+25),np.append(uniY-25,uniY[-1]+25))
+		cs = ax.pcolor(X,Y,np.reshape(zPlot,(len(uniY),len(uniX))),cmap=cmap,norm=plotNorm)
+	if colorbar:
+		csB = plt.colorbar(cs,cax=ax.cax,ticks=clevel*100,format='%1.2e')
+		# csB.on_mappable_changed(cs)
+		ax.set_title(flag+' '+par + ' diff',fontsize=8)
+		return cs, csB
+	return cs,None

SimPEG/MT/Utils/sourceUtils.py

@@ -0,0 +1,178 @@
+import SimPEG as simpeg, numpy as np
+
+def homo1DModelSource(mesh,freq,sigma_1d):
+    '''
+        Function that calculates and return background fields
+
+        :param Simpeg mesh object mesh: Holds information on the discretization
+        :param float freq: The frequency to solve at
+        :param np.array sigma_1d: Background model of conductivity to base the calculations on, 1d model.
+        :rtype: numpy.ndarray (mesh.nE,2)
+        :return: eBG_bp, E fields for the background model at both polarizations.
+
+    '''
+    # import
+    from SimPEG.MT.Utils import get1DEfields
+    # Get a 1d solution for a halfspace background
+    if mesh.dim == 1:
+        mesh1d = mesh
+    elif mesh.dim == 2:
+        mesh1d = simpeg.Mesh.TensorMesh([mesh.hy],np.array([mesh.x0[1]]))
+    elif mesh.dim == 3:
+        mesh1d = simpeg.Mesh.TensorMesh([mesh.hz],np.array([mesh.x0[2]]))
+
+    # # Note: Everything is using e^iwt
+    e0_1d = get1DEfields(mesh1d,sigma_1d,freq)
+    if mesh.dim == 1:
+        eBG_px = simpeg.mkvc(e0_1d,2)
+        eBG_py = -simpeg.mkvc(e0_1d,2) # added a minus to make the results in the correct quadrents.
+    elif mesh.dim == 2:
+        ex_px = np.zeros(mesh.vnEx,dtype=complex)
+        ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+        for i in np.arange(mesh.vnEx[0]):
+            ex_px[i,:] = -e0_1d
+        eBG_px = np.vstack((simpeg.Utils.mkvc(ex_px,2),ey_px))
+        # Setup y (north) polarization (_py)
+        ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+        ey_py = np.zeros(mesh.vnEy, dtype='complex128')
+        # Assign the source to ey_py
+        for i in np.arange(mesh.vnEy[0]):
+            ey_py[i,:] = e0_1d
+        # ey_py[1:-1,1:-1,1:-1] = 0
+        eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+    elif mesh.dim == 3:
+        # Setup x (east) polarization (_x)
+        ex_px = np.zeros(mesh.vnEx,dtype=complex)
+        ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+        ez_px = np.zeros((mesh.nEz,1),dtype=complex)
+        # Assign the source to ex_x
+        for i in np.arange(mesh.vnEx[0]):
+            for j in np.arange(mesh.vnEx[1]):
+                ex_px[i,j,:] = -e0_1d
+        eBG_px = np.vstack((simpeg.Utils.mkvc(ex_px,2),ey_px,ez_px))
+        # Setup y (north) polarization (_py)
+        ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+        ey_py = np.zeros(mesh.vnEy, dtype='complex128')
+        ez_py = np.zeros((mesh.nEz,1), dtype='complex128')
+        # Assign the source to ey_py
+        for i in np.arange(mesh.vnEy[0]):
+            for j in np.arange(mesh.vnEy[1]):
+                ey_py[i,j,:] = e0_1d
+        # ey_py[1:-1,1:-1,1:-1] = 0
+        eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+
+    # Return the electric fields
+    eBG_bp = np.hstack((eBG_px,eBG_py))
+    return eBG_bp
+
+def analytic1DModelSource(mesh,freq,sigma_1d):
+    '''
+        Function that calculates and return background fields
+
+        :param Simpeg mesh object mesh: Holds information on the discretization
+        :param float freq: The frequency to solve at
+        :param np.array sigma_1d: Background model of conductivity to base the calculations on, 1d model.
+        :rtype: numpy.ndarray (mesh.nE,2)
+        :return: eBG_bp, E fields for the background model at both polarizations.
+
+    '''
+    # import
+    from SimPEG.MT.Utils import getEHfields
+    # Get a 1d solution for a halfspace background
+    if mesh.dim == 1:
+        mesh1d = mesh
+    elif mesh.dim == 2:
+        mesh1d = simpeg.Mesh.TensorMesh([mesh.hy],np.array([mesh.x0[1]]))
+    elif mesh.dim == 3:
+        mesh1d = simpeg.Mesh.TensorMesh([mesh.hz],np.array([mesh.x0[2]]))
+
+    # # Note: Everything is using e^iwt
+    Eu, Ed, _, _ = getEHfields(mesh1d,sigma_1d,freq,mesh.vectorNz)
+    # Make the fields into a dictionary of location and the fields
+    e0_1d = Eu+Ed
+    E1dFieldDict = dict(zip(mesh.vectorNz,e0_1d))
+    if mesh.dim == 1:
+        eBG_px = simpeg.mkvc(e0_1d,2)
+        eBG_py = -simpeg.mkvc(e0_1d,2) # added a minus to make the results in the correct quadrents.
+    elif mesh.dim == 2:
+        ex_px = np.zeros(mesh.vnEx,dtype=complex)
+        ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+        for i in np.arange(mesh.vnEx[0]):
+            ex_px[i,:] = -e0_1d
+        eBG_px = np.vstack((simpeg.Utils.mkvc(ex_px,2),ey_px))
+        # Setup y (north) polarization (_py)
+        ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+        ey_py = np.zeros(mesh.vnEy, dtype='complex128')
+        # Assign the source to ey_py
+        for i in np.arange(mesh.vnEy[0]):
+            ey_py[i,:] = e0_1d
+        # ey_py[1:-1,1:-1,1:-1] = 0
+        eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+    elif mesh.dim == 3:
+        # Setup x (east) polarization (_x)
+        ex_px = -np.array([E1dFieldDict[i] for i in mesh.gridEx[:,2]]).reshape(-1,1)
+        ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+        ez_px = np.zeros((mesh.nEz,1),dtype=complex)
+        # Construct the full fields
+        eBG_px = np.vstack((ex_px,ey_px,ez_px))
+        # Setup y (north) polarization (_py)
+        ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+        ey_py = np.array([E1dFieldDict[i] for i in mesh.gridEy[:,2]]).reshape(-1,1)
+        ez_py = np.zeros((mesh.nEz,1), dtype='complex128')
+        # Construct the full fields
+        eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+
+    # Return the electric fields
+    eBG_bp = np.hstack((eBG_px,eBG_py))
+    return eBG_bp
+
+# def homo3DModelSource(mesh,model,freq):
+#     '''
+#         Function that estimates 1D analytic background fields from a 3D model.
+
+#         :param Simpeg mesh object mesh: Holds information on the discretization
+#         :param float freq: The frequency to solve at
+#         :param np.array sigma_1d: Background model of conductivity to base the calculations on, 1d model.
+#         :rtype: numpy.ndarray (mesh.nE,2)
+#         :return: eBG_bp, E fields for the background model at both polarizations.
+
+#     '''
+
+#     if mesh.dim < 3:
+#         raise IOError('Input mesh has to have 3 dimensions.')
+
+
+#     # Get the locations
+#     a = mesh.gridCC[:,0:2].copy()
+#     unixy = np.unique(a.view(a.dtype.descr * a.shape[1])).view(float).reshape(-1,2)
+#     uniz = np.unique(mesh.gridCC[:,2])
+#     # # Note: Everything is using e^iwt
+#     # Need to loop thourgh the xy locations, assess the model and calculate the fields at the phusdo cell centers.
+#     # Then interpolate the cc fields to the edges.
+
+#     e0_1d = get1DEfields(mesh1d,sigma_1d,freq)
+
+#     elif mesh.dim == 3:
+#         # Setup x (east) polarization (_x)
+#         ex_px = np.zeros(mesh.vnEx,dtype=complex)
+#         ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+#         ez_px = np.zeros((mesh.nEz,1),dtype=complex)
+#         # Assign the source to ex_x
+#         for i in np.arange(mesh.vnEx[0]):
+#             for j in np.arange(mesh.vnEx[1]):
+#                 ex_px[i,j,:] = -e0_1d
+#         eBG_px = np.vstack((simpeg.Utils.mkvc(ex_px,2),ey_px,ez_px))
+#         # Setup y (north) polarization (_py)
+#         ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+#         ey_py = np.zeros(mesh.vnEy, dtype='complex128')
+#         ez_py = np.zeros((mesh.nEz,1), dtype='complex128')
+#         # Assign the source to ey_py
+#         for i in np.arange(mesh.vnEy[0]):
+#             for j in np.arange(mesh.vnEy[1]):
+#                 ey_py[i,j,:] = e0_1d
+#         # ey_py[1:-1,1:-1,1:-1] = 0
+#         eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+
+#     # Return the electric fields
+#     eBG_bp = np.hstack((eBG_px,eBG_py))
+#     return eBG_bp

SimPEG/MT/Utils/srcUtils.py

@@ -0,0 +1,46 @@
+import SimPEG as simpeg, numpy as np
+
+def homo1DModelSource(mesh,freq,m_back):
+    '''
+        Function that calculates and return background fields for a 3D mesh and model.
+        The calculuations use 1D field solution for a vertical slice throught model (south-western most column),
+        which is assigned at the fields everywhere for the respective polarizations.2
+
+        :param Simpeg mesh object mesh: Holds information on the discretization
+        :param float freq: The frequency to solve at
+        :param np.array m_back: Background model of conductivity to base the calculations on.
+        :rtype: numpy.ndarray (mesh.nE,2)
+        :return: eBG_bp, E fields for the background model at both polarizations.
+
+    '''
+
+    # import
+    from SimPEG.MT.Utils import get1DEfields
+    # Get a 1d solution for a halfspace background
+    mesh1d = simpeg.Mesh.TensorMesh([mesh.hz],np.array([mesh.x0[2]]))
+    # Note: Everything is using e^iwt
+    e0_1d = get1DEfields(mesh1d,mesh.r(m_back,'CC','CC','M')[0,0,:],freq)
+    # Setup x (east) polarization (_x)
+    ex_px = np.zeros(mesh.vnEx,dtype=complex)
+    ey_px = np.zeros((mesh.nEy,1),dtype=complex)
+    ez_px = np.zeros((mesh.nEz,1),dtype=complex)
+    # Assign the source to ex_x
+    for i in np.arange(mesh.vnEx[0]):
+        for j in np.arange(mesh.vnEx[1]):
+            ex_px[i,j,:] = -e0_1d
+    eBG_px = np.vstack((simpeg.Utils.mkvc(ex_px,2),ey_px,ez_px))
+    # Setup y (north) polarization (_py)
+    ex_py = np.zeros((mesh.nEx,1), dtype='complex128')
+    ey_py = np.zeros(mesh.vnEy, dtype='complex128')
+    ez_py = np.zeros((mesh.nEz,1), dtype='complex128')
+    # Assign the source to ey_py
+
+    for i in np.arange(mesh.vnEy[0]):
+        for j in np.arange(mesh.vnEy[1]):
+            ey_py[i,j,:] = e0_1d
+    # ey_py[1:-1,1:-1,1:-1] = 0
+    eBG_py = np.vstack((ex_py,simpeg.Utils.mkvc(ey_py,2),ez_py))
+
+    # Return the electric fields
+    eBG_bp = np.hstack((eBG_px,eBG_py))
+    return eBG_bp

SimPEG/MT/__init__.py

@@ -0,0 +1,5 @@
+import Utils
+from SurveyMT import Rx, Survey, Data
+from FieldsMT import Fields1D_e, Fields3D_e
+import Problem1D, Problem2D, Problem3D
+import SrcMT

SimPEG/Mesh/CylMesh.py

@@ -330,7 +330,7 @@ class CylMesh(BaseTensorMesh, BaseRectangularMesh, InnerProducts, CylView):
                 raise NotImplementedError('wrapping in the averaging is not yet implemented')
         return self._aveF2CCV
 
-    def getInterpolationMatCartMesh(self, Mrect, locType='CC'):
+    def getInterpolationMatCartMesh(self, Mrect, locType='CC', locTypeTo=None):
         """
             Takes a cartesian mesh and returns a projection to translate onto the cartesian grid.
         """
@@ -338,19 +338,22 @@ class CylMesh(BaseTensorMesh, BaseRectangularMesh, InnerProducts, CylView):
         assert self.isSymmetric, "Currently we have not taken into account other projections for more complicated CylMeshes"
 
 
+        if locTypeTo is None:
+            locTypeTo = locType
+
         if locType == 'F':
             # do this three times for each component
-            X = self.getInterpolationMatCartMesh(Mrect, locType='Fx')
-            Y = self.getInterpolationMatCartMesh(Mrect, locType='Fy')
-            Z = self.getInterpolationMatCartMesh(Mrect, locType='Fz')
+            X = self.getInterpolationMatCartMesh(Mrect, locType='Fx', locTypeTo=locTypeTo+'x')
+            Y = self.getInterpolationMatCartMesh(Mrect, locType='Fy', locTypeTo=locTypeTo+'y')
+            Z = self.getInterpolationMatCartMesh(Mrect, locType='Fz', locTypeTo=locTypeTo+'z')
             return sp.vstack((X,Y,Z))
         if locType == 'E':
-            X = self.getInterpolationMatCartMesh(Mrect, locType='Ex')
-            Y = self.getInterpolationMatCartMesh(Mrect, locType='Ey')
-            Z = spzeros(Mrect.nEz, self.nE)
+            X = self.getInterpolationMatCartMesh(Mrect, locType='Ex', locTypeTo=locTypeTo+'x')
+            Y = self.getInterpolationMatCartMesh(Mrect, locType='Ey', locTypeTo=locTypeTo+'y')
+            Z = spzeros(getattr(Mrect, 'n' + locTypeTo + 'z'), self.nE)
             return sp.vstack((X,Y,Z))
 
-        grid = getattr(Mrect, 'grid' + locType)
+        grid = getattr(Mrect, 'grid' + locTypeTo)
         # This is unit circle stuff, 0 to 2*pi, starting at x-axis, rotating counter clockwise in an x-y slice
         theta = - np.arctan2(grid[:,0] - self.cartesianOrigin[0], grid[:,1] - self.cartesianOrigin[1]) + np.pi/2
         theta[theta < 0] += np.pi*2.0
@@ -366,7 +369,7 @@ class CylMesh(BaseTensorMesh, BaseRectangularMesh, InnerProducts, CylView):
                         'Ex': Mrect.tangents[:Mrect.nEx,:],
                         'Ey': Mrect.tangents[Mrect.nEx:(Mrect.nEx+Mrect.nEy),:],
                         'Ez': Mrect.tangents[-Mrect.nEz:,:],
-                    }[locType]
+                    }[locTypeTo]
             if 'F' in locType:
                 normals = np.c_[np.cos(theta), np.sin(theta), np.zeros(theta.size)]
                 proj = ( normals * dotMe ).sum(axis=1)

SimPEG/Mesh/DiffOperators.py

@@ -307,24 +307,28 @@ class DiffOperators(object):
         return BC
     _cellGradBC_list = 'neumann'
 
+    def _cellGradStencil(self):
+        BC = self.setCellGradBC(self._cellGradBC_list)
+        n = self.vnC
+        if(self.dim == 1):
+            G = ddxCellGrad(n[0], BC[0])
+        elif(self.dim == 2):
+            G1 = sp.kron(speye(n[1]), ddxCellGrad(n[0], BC[0]))
+            G2 = sp.kron(ddxCellGrad(n[1], BC[1]), speye(n[0]))
+            G = sp.vstack((G1, G2), format="csr")
+        elif(self.dim == 3):
+            G1 = kron3(speye(n[2]), speye(n[1]), ddxCellGrad(n[0], BC[0]))
+            G2 = kron3(speye(n[2]), ddxCellGrad(n[1], BC[1]), speye(n[0]))
+            G3 = kron3(ddxCellGrad(n[2], BC[2]), speye(n[1]), speye(n[0]))
+            G = sp.vstack((G1, G2, G3), format="csr")
+        return G
+
     def cellGrad():
         doc = "The cell centered Gradient, takes you to cell faces."
 
         def fget(self):
             if(self._cellGrad is None):
-                BC = self.setCellGradBC(self._cellGradBC_list)
-                n = self.vnC
-                if(self.dim == 1):
-                    G = ddxCellGrad(n[0], BC[0])
-                elif(self.dim == 2):
-                    G1 = sp.kron(speye(n[1]), ddxCellGrad(n[0], BC[0]))
-                    G2 = sp.kron(ddxCellGrad(n[1], BC[1]), speye(n[0]))
-                    G = sp.vstack((G1, G2), format="csr")
-                elif(self.dim == 3):
-                    G1 = kron3(speye(n[2]), speye(n[1]), ddxCellGrad(n[0], BC[0]))
-                    G2 = kron3(speye(n[2]), ddxCellGrad(n[1], BC[1]), speye(n[0]))
-                    G3 = kron3(ddxCellGrad(n[2], BC[2]), speye(n[1]), speye(n[0]))
-                    G = sp.vstack((G1, G2, G3), format="csr")
+                G = self._cellGradStencil()
                 # Compute areas of cell faces & volumes
                 S = self.area
                 V = self.aveCC2F*self.vol  # Average volume between adjacent cells
@@ -361,19 +365,24 @@ class DiffOperators(object):
     _cellGradBC = None
     cellGradBC = property(**cellGradBC())
 
+    def _cellGradxStencil(self):
+        BC = ['neumann', 'neumann']
+        n = self.vnC
+        if(self.dim == 1):
+            G1 = ddxCellGrad(n[0], BC)
+        elif(self.dim == 2):
+            G1 = sp.kron(speye(n[1]), ddxCellGrad(n[0], BC))
+        elif(self.dim == 3):
+            G1 = kron3(speye(n[2]), speye(n[1]), ddxCellGrad(n[0], BC))
+        return G1
+
+
     def cellGradx():
         doc = "Cell centered Gradient in the x dimension. Has neumann boundary conditions."
 
         def fget(self):
             if getattr(self, '_cellGradx', None) is None:
-                BC = ['neumann', 'neumann']
-                n = self.vnC
-                if(self.dim == 1):
-                    G1 = ddxCellGrad(n[0], BC)
-                elif(self.dim == 2):
-                    G1 = sp.kron(speye(n[1]), ddxCellGrad(n[0], BC))
-                elif(self.dim == 3):
-                    G1 = kron3(speye(n[2]), speye(n[1]), ddxCellGrad(n[0], BC))
+                G1 = self._cellGradxStencil()
                 # Compute areas of cell faces & volumes
                 V = self.aveCC2F*self.vol
                 L = self.r(self.area/V, 'F','Fx', 'V')
@@ -382,17 +391,22 @@ class DiffOperators(object):
         return locals()
     cellGradx = property(**cellGradx())
 
+    def _cellGradyStencil(self):
+        if self.dim < 2: return None
+        BC = ['neumann', 'neumann']
+        n = self.vnC
+        if(self.dim == 2):
+            G2 = sp.kron(ddxCellGrad(n[1], BC), speye(n[0]))
+        elif(self.dim == 3):
+            G2 = kron3(speye(n[2]), ddxCellGrad(n[1], BC), speye(n[0]))
+        return G2
+
     def cellGrady():
         doc = "Cell centered Gradient in the x dimension. Has neumann boundary conditions."
         def fget(self):
             if self.dim < 2: return None
             if getattr(self, '_cellGrady', None) is None:
-                BC = ['neumann', 'neumann']
-                n = self.vnC
-                if(self.dim == 2):
-                    G2 = sp.kron(ddxCellGrad(n[1], BC), speye(n[0]))
-                elif(self.dim == 3):
-                    G2 = kron3(speye(n[2]), ddxCellGrad(n[1], BC), speye(n[0]))
+                G2 = self._cellGradyStencil()
                 # Compute areas of cell faces & volumes
                 V = self.aveCC2F*self.vol
                 L = self.r(self.area/V, 'F','Fy', 'V')
@@ -401,14 +415,19 @@ class DiffOperators(object):
         return locals()
     cellGrady = property(**cellGrady())
 
+    def _cellGradzStencil(self):
+        if self.dim < 3: return None
+        BC = ['neumann', 'neumann']
+        n = self.vnC
+        G3 = kron3(ddxCellGrad(n[2], BC), speye(n[1]), speye(n[0]))
+        return G3
+
     def cellGradz():
         doc = "Cell centered Gradient in the x dimension. Has neumann boundary conditions."
         def fget(self):
             if self.dim < 3: return None
             if getattr(self, '_cellGradz', None) is None:
-                BC = ['neumann', 'neumann']
-                n = self.vnC
-                G3 = kron3(ddxCellGrad(n[2], BC), speye(n[1]), speye(n[0]))
+                G3 = self._cellGradzStencil()
                 # Compute areas of cell faces & volumes
                 V = self.aveCC2F*self.vol
                 L = self.r(self.area/V, 'F','Fz', 'V')
@@ -565,7 +584,67 @@ class DiffOperators(object):
 
         return Pbc, Pin, Pout
 
+    def getBCProjWF_simple(self, discretization='CC'):
+        """
 
+        The weak form boundary condition projection matrices
+        when mixed boundary condition is used
+
+
+        """
+
+        if discretization is not 'CC':
+            raise NotImplementedError('Boundary conditions only implemented for CC discretization.')
+
+        def projBC(n):
+            ij = ([0,n], [0,1])
+            vals = [0,0]
+            vals[0] = 1
+            vals[1] = 1
+            return sp.csr_matrix((vals, ij), shape=(n+1,2))
+
+        def projDirichlet(n, bc):
+            bc = checkBC(bc)
+            ij = ([0,n], [0,1])
+            vals = [0,0]
+            if(bc[0] == 'dirichlet'):
+                vals[0] = -1
+            if(bc[1] == 'dirichlet'):
+                vals[1] = 1
+            return sp.csr_matrix((vals, ij), shape=(n+1,2))
+
+        BC = [['dirichlet','dirichlet'],['dirichlet','dirichlet'],['dirichlet','dirichlet']]
+        n = self.vnC
+        indF = self.faceBoundaryInd
+        if(self.dim == 1):
+            Pbc = projDirichlet(n[0], BC[0])
+            B = projBC(n[0])
+            indF = indF[0] | indF[1]
+            Pbc = Pbc*sdiag(self.area[indF])
+
+        elif(self.dim == 2):
+            Pbc1 = sp.kron(speye(n[1]), projDirichlet(n[0], BC[0]))
+            Pbc2 = sp.kron(projDirichlet(n[1], BC[1]), speye(n[0]))
+            Pbc = sp.block_diag((Pbc1, Pbc2), format="csr")
+            B1 = sp.kron(speye(n[1]), projBC(n[0]))
+            B2 = sp.kron(projBC(n[1]), speye(n[0]))
+            B = sp.block_diag((B1, B2), format="csr")
+            indF = np.r_[(indF[0] | indF[1]), (indF[2] | indF[3])]
+            Pbc = Pbc*sdiag(self.area[indF])
+
+        elif(self.dim == 3):
+            Pbc1 = kron3(speye(n[2]), speye(n[1]), projDirichlet(n[0], BC[0]))
+            Pbc2 = kron3(speye(n[2]), projDirichlet(n[1], BC[1]), speye(n[0]))
+            Pbc3 = kron3(projDirichlet(n[2], BC[2]), speye(n[1]), speye(n[0]))
+            Pbc = sp.block_diag((Pbc1, Pbc2, Pbc3), format="csr")
+            B1 = kron3(speye(n[2]), speye(n[1]), projBC(n[0]))
+            B2 = kron3(speye(n[2]), projBC(n[1]), speye(n[0]))
+            B3 = kron3(projBC(n[2]), speye(n[1]), speye(n[0]))
+            B = sp.block_diag((B1, B2, B3), format="csr")
+            indF = np.r_[(indF[0] | indF[1]), (indF[2] | indF[3]), (indF[4] | indF[5])]
+            Pbc = Pbc*sdiag(self.area[indF])
+
+        return Pbc, B.T
     # --------------- Averaging ---------------------
 
     @property
@@ -746,4 +825,3 @@ class DiffOperators(object):
                                           kron3(av(n[2]), speye(n[1]+1), av(n[0])),
                                           kron3(speye(n[2]+1), av(n[1]), av(n[0]))), format="csr")
         return self._aveN2F
-

SimPEG/Mesh/MeshIO.py

@@ -0,0 +1,415 @@
+import numpy as np, os
+from SimPEG import Utils
+
+class TensorMeshIO(object):
+
+    @classmethod
+    def readUBC(TensorMesh, fileName):
+        """
+            Read UBC GIF 3DTensor mesh and generate 3D Tensor mesh in simpegTD
+
+            Input:
+            :param fileName, path to the UBC GIF mesh file
+
+            Output:
+            :param SimPEG TensorMesh object
+        """
+
+        # Interal function to read cell size lines for the UBC mesh files.
+        def readCellLine(line):
+            for seg in line.split():
+                if '*' in seg:
+                    st = seg
+                    sp = seg.split('*')
+                    re = int(sp[0])*(' ' + sp[1])
+                    line = line.replace(st,re.strip())
+            return np.array(line.split(),dtype=float)
+        # Read the file as line strings, remove lines with comment = !
+        msh = np.genfromtxt(fileName,delimiter='\n',dtype=np.str,comments='!')
+
+        # Fist line is the size of the model
+        sizeM = np.array(msh[0].split(),dtype=float)
+        # Second line is the South-West-Top corner coordinates.
+        x0 = np.array(msh[1].split(),dtype=float)
+        # Read the cell sizes
+        h1 = readCellLine(msh[2])
+        h2 = readCellLine(msh[3])
+        h3temp = readCellLine(msh[4])
+        h3 = h3temp[::-1] # Invert the indexing of the vector to start from the bottom.
+        # Adjust the reference point to the bottom south west corner
+        x0[2] = x0[2] - np.sum(h3)
+        # Make the mesh
+        tensMsh = TensorMesh([h1,h2,h3],x0)
+        return tensMsh
+
+    @classmethod
+    def readVTK(TensorMesh, fileName):
+        """
+            Read VTK Rectilinear (vtr xml file) and return SimPEG Tensor mesh and model
+
+            Input:
+            :param vtrFileName, path to the vtr model file to write to
+
+            Output:
+            :return SimPEG TensorMesh object
+            :return SimPEG model dictionary
+
+        """
+        # Import
+        from vtk import vtkXMLRectilinearGridReader as vtrFileReader
+        from vtk.util.numpy_support import vtk_to_numpy
+
+        # Read the file
+        vtrReader = vtrFileReader()
+        vtrReader.SetFileName(fileName)
+        vtrReader.Update()
+        vtrGrid = vtrReader.GetOutput()
+        # Sort information
+        hx = np.abs(np.diff(vtk_to_numpy(vtrGrid.GetXCoordinates())))
+        xR = vtk_to_numpy(vtrGrid.GetXCoordinates())[0]
+        hy = np.abs(np.diff(vtk_to_numpy(vtrGrid.GetYCoordinates())))
+        yR = vtk_to_numpy(vtrGrid.GetYCoordinates())[0]
+        zD = np.diff(vtk_to_numpy(vtrGrid.GetZCoordinates()))
+        # Check the direction of hz
+        if np.all(zD < 0):
+            hz = np.abs(zD[::-1])
+            zR = vtk_to_numpy(vtrGrid.GetZCoordinates())[-1]
+        else:
+            hz = np.abs(zD)
+            zR = vtk_to_numpy(vtrGrid.GetZCoordinates())[0]
+        x0 = np.array([xR,yR,zR])
+
+        # Make the SimPEG object
+        tensMsh = TensorMesh([hx,hy,hz],x0)
+
+        # Grap the models
+        models = {}
+        for i in np.arange(vtrGrid.GetCellData().GetNumberOfArrays()):
+            modelName = vtrGrid.GetCellData().GetArrayName(i)
+            if np.all(zD < 0):
+                modFlip = vtk_to_numpy(vtrGrid.GetCellData().GetArray(i))
+                tM = tensMsh.r(modFlip,'CC','CC','M')
+                modArr = tensMsh.r(tM[:,:,::-1],'CC','CC','V')
+            else:
+                modArr = vtk_to_numpy(vtrGrid.GetCellData().GetArray(i))
+            models[modelName] = modArr
+
+        # Return the data
+        return tensMsh, models
+
+    def writeVTK(mesh, fileName, models=None):
+        """
+        Makes and saves a VTK rectilinear file (vtr) for a simpeg Tensor mesh and model.
+
+        Input:
+        :param str, path to the output vtk file
+        :param mesh, SimPEG TensorMesh object - mesh to be transfer to VTK
+        :param models, dictionary of numpy.array - Name('s) and array('s). Match number of cells
+
+        """
+        # Import
+        from vtk import vtkRectilinearGrid as rectGrid, vtkXMLRectilinearGridWriter as rectWriter, VTK_VERSION
+        from vtk.util.numpy_support import numpy_to_vtk
+
+        # Deal with dimensionalities
+        if mesh.dim >= 1:
+            vX = mesh.vectorNx
+            xD = mesh.nNx
+            yD,zD = 1,1
+            vY, vZ = np.array([0,0])
+        if mesh.dim >= 2:
+            vY = mesh.vectorNy
+            yD = mesh.nNy
+        if mesh.dim == 3:
+            vZ = mesh.vectorNz
+            zD = mesh.nNz
+        # Use rectilinear VTK grid.
+        # Assign the spatial information.
+        vtkObj = rectGrid()
+        vtkObj.SetDimensions(xD,yD,zD)
+        vtkObj.SetXCoordinates(numpy_to_vtk(vX,deep=1))
+        vtkObj.SetYCoordinates(numpy_to_vtk(vY,deep=1))
+        vtkObj.SetZCoordinates(numpy_to_vtk(vZ,deep=1))
+
+        # Assign the model('s) to the object
+        if models is not None:
+            for item in models.iteritems():
+                # Convert numpy array
+                vtkDoubleArr = numpy_to_vtk(item[1],deep=1)
+                vtkDoubleArr.SetName(item[0])
+                vtkObj.GetCellData().AddArray(vtkDoubleArr)
+            # Set the active scalar
+            vtkObj.GetCellData().SetActiveScalars(models.keys()[0])
+        # vtkObj.Update()
+
+        # Check the extension of the fileName
+        ext = os.path.splitext(fileName)[1]
+        if ext is '':
+            fileName = fileName + '.vtr'
+        elif ext not in '.vtr':
+            raise IOError('{:s} is an incorrect extension, has to be .vtr')
+        # Write the file.
+        vtrWriteFilter = rectWriter()
+        if float(VTK_VERSION.split('.')[0]) >=6:
+            vtrWriteFilter.SetInputData(vtkObj)
+        else:
+            vtuWriteFilter.SetInput(vtuObj)
+        vtrWriteFilter.SetFileName(fileName)
+        vtrWriteFilter.Update()
+
+
+    def readModelUBC(mesh, fileName):
+        """
+            Read UBC 3DTensor mesh model and generate 3D Tensor mesh model in simpeg
+
+            Input:
+            :param fileName, path to the UBC GIF mesh file to read
+            :param mesh, TensorMesh object, mesh that coresponds to the model
+
+            Output:
+            :return numpy array, model with TensorMesh ordered
+        """
+        f = open(fileName, 'r')
+        model = np.array(map(float, f.readlines()))
+        f.close()
+        model = np.reshape(model, (mesh.nCz, mesh.nCx, mesh.nCy), order = 'F')
+        model = model[::-1,:,:]
+        model = np.transpose(model, (1, 2, 0))
+        model = Utils.mkvc(model)
+        return model
+
+    def writeModelUBC(mesh, fileName, model):
+        """
+            Writes a model associated with a SimPEG TensorMesh
+            to a UBC-GIF format model file.
+
+            :param str fileName: File to write to
+            :param simpeg.Mesh.TensorMesh mesh: The mesh
+            :param numpy.ndarray model: The model
+        """
+
+        # Reshape model to a matrix
+        modelMat = mesh.r(model,'CC','CC','M')
+        # Transpose the axes
+        modelMatT = modelMat.transpose((2,0,1))
+        # Flip z to positive down
+        modelMatTR = Utils.mkvc(modelMatT[::-1,:,:])
+
+        np.savetxt(fileName, modelMatTR.ravel())
+
+    def writeUBC(mesh, fileName, models=None):
+        """
+            Writes a SimPEG TensorMesh to a UBC-GIF format mesh file.
+
+            :param str fileName: File to write to
+            :param simpeg.Mesh.TensorMesh mesh: The mesh
+
+        """
+        assert mesh.dim == 3
+        s = ''
+        s += '%i %i %i\n' %tuple(mesh.vnC)
+        origin = mesh.x0 + np.array([0,0,mesh.hz.sum()]) # Have to it in the same operation or use mesh.x0.copy(), otherwise the mesh.x0 is updated.
+        origin.dtype = float
+
+        s += '%.2f %.2f %.2f\n' %tuple(origin)
+        s += ('%.2f '*mesh.nCx+'\n')%tuple(mesh.hx)
+        s += ('%.2f '*mesh.nCy+'\n')%tuple(mesh.hy)
+        s += ('%.2f '*mesh.nCz+'\n')%tuple(mesh.hz[::-1])
+        f = open(fileName, 'w')
+        f.write(s)
+        f.close()
+
+        if models is None: return
+        assert type(models) is dict, 'models must be a dict'
+        for key in models:
+            assert type(key) is str, 'The dict key is a file name'
+            mesh.writeModelUBC(key, models[key])
+
+class TreeMeshIO(object):
+
+    def writeUBC(mesh, fileName, models=None):
+        """
+            Write UBC ocTree mesh and model files from a simpeg ocTree mesh and model.
+
+            :param str fileName: File to write to
+            :param simpeg.Mesh.TreeMesh mesh: The mesh
+            :param dictionary models: The models in a dictionary, where the keys is the name of the of the model file
+        """
+
+        # Calculate information to write in the file.
+        # Number of cells in the underlying mesh
+        nCunderMesh = np.array([h.size for h in mesh.h],dtype=np.int64)
+        # The top-south-west most corner of the mesh
+        tswCorn = mesh.x0 + np.array([0,0,np.sum(mesh.h[2])])
+        # Smallest cell size
+        smallCell = np.array([h.min() for h in mesh.h])
+        # Number of cells
+        nrCells = mesh.nC
+
+        ## Extract iformation about the cells.
+        # cell pointers
+        cellPointers = np.array([c._pointer for c in mesh])
+        # cell with
+        cellW = np.array([ mesh._levelWidth(i) for i in cellPointers[:,-1] ])
+        # Need to shift the pointers to work with UBC indexing
+        # UBC Octree indexes always the top-left-close (top-south-west) corner first and orders the cells in z(top-down),x,y vs x,y,z(bottom-up).
+        # Shift index up by 1
+        ubcCellPt = cellPointers[:,0:-1].copy() + np.array([1.,1.,1.])
+        # Need reindex the z index to be from the top-left-close corner and to be from the global top.
+        ubcCellPt[:,2] = ( nCunderMesh[-1] + 2) - (ubcCellPt[:,2] + cellW)
+
+        # Reorder the ubcCellPt
+        ubcReorder = np.argsort(ubcCellPt.view(','.join(3*['float'])),axis=0,order=['f2','f1','f0'])[:,0]
+        # Make a array with the pointers and the withs, that are order in the ubc ordering
+        indArr = np.concatenate((ubcCellPt[ubcReorder,:],cellW[ubcReorder].reshape((-1,1)) ),axis=1)
+
+        ## Write the UBC octree mesh file
+        with open(fileName,'w') as mshOut:
+            mshOut.write('{:.0f} {:.0f} {:.0f}\n'.format(nCunderMesh[0],nCunderMesh[1],nCunderMesh[2]))
+            mshOut.write('{:.4f} {:.4f} {:.4f}\n'.format(tswCorn[0],tswCorn[1],tswCorn[2]))
+            mshOut.write('{:.3f} {:.3f} {:.3f}\n'.format(smallCell[0],smallCell[1],smallCell[2]))
+            mshOut.write('{:.0f} \n'.format(nrCells))
+            np.savetxt(mshOut,indArr,fmt='%i')
+
+        ## Print the models
+        # Assign the model('s) to the object
+        if models is not None:
+            # indUBCvector = np.argsort(cX0[np.argsort(np.concatenate((cX0[:,0:2],cX0[:,2:3].max() - cX0[:,2:3]),axis=1).view(','.join(3*['float'])),axis=0,order=('f2','f1','f0'))[:,0]].view(','.join(3*['float'])),axis=0,order=('f2','f1','f0'))[:,0]
+            for item in models.iteritems():
+                # Save the data
+                np.savetxt(item[0],item[1][ubcReorder],fmt='%3.5e')
+
+    @classmethod
+    def readUBC(TreeMesh, meshFile):
+        """
+            Read UBC 3D OcTree mesh and/or modelFiles
+
+            Input:
+            :param str meshFile: path to the UBC GIF OcTree mesh file to read
+
+            Output:
+            :return SimPEG.Mesh.TreeMesh mesh: The octree mesh
+            :return list of ndarray's: models as a list of numpy array's
+        """
+
+        ## Read the file lines
+        fileLines = np.genfromtxt(meshFile,dtype=str,delimiter='\n')
+        # Extract the data
+        nCunderMesh = np.array(fileLines[0].split(),dtype=float)
+        # I think this is the case?
+        if np.unique(nCunderMesh).size >1:
+            raise Exception('SimPEG TreeMeshes have the same number of cell in all directions')
+        tswCorn = np.array(fileLines[1].split(),dtype=float)
+        smallCell = np.array(fileLines[2].split(),dtype=float)
+        nrCells = np.array(fileLines[3].split(),dtype=float)
+        # Read the index array
+        indArr = np.genfromtxt(fileLines[4::],dtype=np.int)
+
+        ## Calculate simpeg parameters
+        h1,h2,h3 = [np.ones(nr)*sz for nr,sz in zip(nCunderMesh,smallCell)]
+        x0 = tswCorn - np.array([0,0,np.sum(h3)])
+        # Need to convert the index array to a points list that complies with SimPEG TreeMesh.
+        # Shift to start at 0
+        simpegCellPt = indArr[:,0:-1].copy()
+        simpegCellPt[:,2] = ( nCunderMesh[-1] + 2) - (simpegCellPt[:,2] + indArr[:,3])
+        # Need reindex the z index to be from the bottom-left-close corner and to be from the global bottom.
+        simpegCellPt = simpegCellPt - np.array([1.,1.,1.])
+
+        # Calculate the cell level
+        simpegLevel = np.log2(np.min(nCunderMesh)) - np.log2(indArr[:,3])
+        # Make a pointer matrix
+        simpegPointers = np.concatenate((simpegCellPt,simpegLevel.reshape((-1,1))),axis=1)
+
+        ## Make the tree mesh
+        mesh = TreeMesh([h1,h2,h3],x0)
+        mesh._cells = set([mesh._index(p) for p in simpegPointers.tolist()])
+
+        # Figure out the reordering
+        mesh._simpegReorderUBC = np.argsort(np.array([mesh._index(i) for i in simpegPointers.tolist()]))
+        # mesh._simpegReorderUBC = np.argsort((np.array([[1,1,1,-1]])*simpegPointers).view(','.join(4*['float'])),axis=0,order=['f3','f2','f1','f0'])[:,0]
+
+        return mesh
+
+
+    def readModelUBC(mesh, fileName):
+        """
+            Read UBC OcTree model and get vector
+
+            Input:
+            :param fileName, path to the UBC GIF model file to read
+
+            Output:
+            :return numpy array, OcTree model
+        """
+
+        if type(fileName) is list:
+            out = {}
+            for f in fileName:
+                out[f] = mesh.readModelUBC(f)
+            return out
+
+        assert hasattr(mesh, '_simpegReorderUBC'), 'The file must have been loaded from a UBC format.'
+        assert mesh.dim == 3
+
+        modList = []
+        modArr = np.loadtxt(fileName)
+        if len(modArr.shape) == 1:
+            modList.append(modArr[mesh._simpegReorderUBC])
+        else:
+            modList.append(modArr[mesh._simpegReorderUBC,:])
+        return modList
+
+    def writeVTK(mesh, fileName, models=None):
+        """
+        Function to write a VTU file from a SimPEG TreeMesh and model.
+        """
+        import vtk
+        from vtk import vtkXMLUnstructuredGridWriter as Writer, VTK_VERSION
+        from vtk.util.numpy_support import numpy_to_vtk, numpy_to_vtkIdTypeArray
+
+        if str(type(mesh)).split()[-1][1:-2] not in 'SimPEG.Mesh.TreeMesh.TreeMesh':
+            raise IOError('mesh is not a SimPEG TreeMesh.')
+
+        # Make the data parts for the vtu object
+        # Points
+        mesh.number()
+        ptsMat = mesh._gridN + mesh.x0
+
+        vtkPts = vtk.vtkPoints()
+        vtkPts.SetData(numpy_to_vtk(ptsMat,deep=True))
+        # Cells
+        cellConn = np.array([c.nodes for c in mesh],dtype=np.int64)
+
+        cellsMat = np.concatenate((np.ones((cellConn.shape[0],1),dtype=np.int64)*cellConn.shape[1],cellConn),axis=1).ravel()
+        cellsArr = vtk.vtkCellArray()
+        cellsArr.SetNumberOfCells(cellConn.shape[0])
+        cellsArr.SetCells(cellConn.shape[0],numpy_to_vtkIdTypeArray(cellsMat,deep=True))
+
+        # Make the object
+        vtuObj = vtk.vtkUnstructuredGrid()
+        vtuObj.SetPoints(vtkPts)
+        vtuObj.SetCells(vtk.VTK_VOXEL,cellsArr)
+        # Add the level of refinement as a cell array
+        cellSides = np.array([np.array(vtuObj.GetCell(i).GetBounds()).reshape((3,2)).dot(np.array([-1, 1])) for i in np.arange(vtuObj.GetNumberOfCells())])
+        uniqueLevel, indLevel = np.unique(np.prod(cellSides,axis=1),return_inverse=True)
+        refineLevelArr = numpy_to_vtk(indLevel.max() - indLevel,deep=1)
+        refineLevelArr.SetName('octreeLevel')
+        vtuObj.GetCellData().AddArray(refineLevelArr)
+        # Assign the model('s) to the object
+        if models is not None:
+            for item in models.iteritems():
+                # Convert numpy array
+                vtkDoubleArr = numpy_to_vtk(item[1],deep=1)
+                vtkDoubleArr.SetName(item[0])
+                vtuObj.GetCellData().AddArray(vtkDoubleArr)
+
+        # Make the writer
+        vtuWriteFilter = Writer()
+        if float(VTK_VERSION.split('.')[0]) >=6:
+            vtuWriteFilter.SetInputData(vtuObj)
+        else:
+            vtuWriteFilter.SetInput(vtuObj)
+        vtuWriteFilter.SetFileName(fileName)
+        # Write the file
+        vtuWriteFilter.Update()
+

SimPEG/Mesh/TreeMesh.py

@@ -90,11 +90,6 @@
 #
 
 from SimPEG import np, sp, Utils, Solver
-import matplotlib.pyplot as plt
-import matplotlib
-from mpl_toolkits.mplot3d import Axes3D
-import matplotlib.colors as colors
-import matplotlib.cm as cmx
 
 try:
     import TreeUtils
@@ -105,11 +100,12 @@ except Exception, e:
 
 from InnerProducts import InnerProducts
 from TensorMesh import TensorMesh, BaseTensorMesh
+from MeshIO import TreeMeshIO
 import time
 
 MAX_BITS = 20
 
-class TreeMesh(BaseTensorMesh, InnerProducts):
+class TreeMesh(BaseTensorMesh, InnerProducts, TreeMeshIO):
 
     _meshType = 'TREE'
 
@@ -569,15 +565,18 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
         return [p - (p % mod) for p in pointer[:-1]] + [pointer[-1]-1]
 
     def _cellN(self, p):
+        """Node location [x,y(,z)] of a single cell, closest to origin, given a pointer."""
         p = self._asPointer(p)
         return [hi[:p[ii]].sum() for ii, hi in enumerate(self.h)]
 
     def _cellH(self, p):
+        """Widths of a single cell given a pointer."""
         p = self._asPointer(p)
         w = self._levelWidth(p[-1])
         return [hi[p[ii]:p[ii]+w].sum() for ii, hi in enumerate(self.h)]
 
     def _cellC(self, p):
+        """Cell center of a single cell (without origin correction), given a pointer."""
         return (np.array(self._cellH(p))/2.0 + self._cellN(p)).tolist()
 
     def _levelWidth(self, level):
@@ -832,8 +831,10 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
     def _numberCells(self, force=False):
         if not self.__dirtyCells__ and not force: return
         self._cc2i = dict()
+        self._i2cc = dict()
         for ii, c in enumerate(sorted(self._cells)):
             self._cc2i[c] = ii
+            self._i2cc[ii] = c
         self.__dirtyCells__ = False
 
     def _numberNodes(self, force=False):
@@ -1709,9 +1710,9 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
         "Construct the averaging operator on cell faces to cell centers."
         if getattr(self, '_aveF2CC', None) is None:
             if self.dim == 2:
-                self._aveF2CC = 1./self.dim*sp.hstack([self.aveFx2CC, self.aveFy2CC])
+                self._aveF2CC = 1./self.dim*sp.hstack([self.aveFx2CC, self.aveFy2CC]).tocsr()
             elif self.dim == 3:
-                self._aveF2CC = 1./self.dim*sp.hstack([self.aveFx2CC, self.aveFy2CC, self.aveFz2CC])
+                self._aveF2CC = 1./self.dim*sp.hstack([self.aveFx2CC, self.aveFy2CC, self.aveFz2CC]).tocsr()
         return self._aveF2CC
 
     @property
@@ -1719,9 +1720,9 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
         "Construct the averaging operator on cell faces to cell centers."
         if getattr(self, '_aveF2CCV', None) is None:
             if self.dim == 2:
-                self._aveF2CCV = sp.block_diag([self.aveFx2CC, self.aveFy2CC])
+                self._aveF2CCV = sp.block_diag([self.aveFx2CC, self.aveFy2CC]).tocsr()
             elif self.dim == 3:
-                self._aveF2CCV = sp.block_diag([self.aveFx2CC, self.aveFy2CC, self.aveFz2CC])
+                self._aveF2CCV = sp.block_diag([self.aveFx2CC, self.aveFy2CC, self.aveFz2CC]).tocsr()
         return self._aveF2CCV
 
     @property
@@ -1973,6 +1974,13 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
         facesX=False, facesY=False, facesZ=False,
         edgesX=False, edgesY=False, edgesZ=False):
 
+
+        import matplotlib.pyplot as plt
+        import matplotlib
+        from mpl_toolkits.mplot3d import Axes3D
+        import matplotlib.colors as colors
+        import matplotlib.cm as cmx
+
         # self.number()
 
         axOpts = {'projection':'3d'} if self.dim == 3 else {}
@@ -2094,6 +2102,13 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
     def plotImage(self, I, ax=None, showIt=False, grid=False, clim=None):
         if self.dim == 3: raise Exception('Use plot slice?')
 
+
+        import matplotlib.pyplot as plt
+        import matplotlib
+        from mpl_toolkits.mplot3d import Axes3D
+        import matplotlib.colors as colors
+        import matplotlib.cm as cmx
+
         if ax is None: ax = plt.subplot(111)
         jet = cm = plt.get_cmap('jet')
         cNorm  = colors.Normalize(
@@ -2116,13 +2131,26 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
     def plotSlice(self, v, vType='CC',
         normal='Z', ind=None, grid=True, view='real',
         ax=None, clim=None, showIt=False,
-        pcolorOpts={},
-        streamOpts={'color':'k'},
-        gridOpts={'color':'k', 'alpha':0.5}):
+        pcolorOpts=None,
+        streamOpts=None,
+        gridOpts=None):
 
+        if pcolorOpts is None:
+            pcolorOpts = {}
+        if streamOpts is None:
+            streamOpts = {'color':'k'}
+        if gridOpts is None:
+            gridOpts = {'color':'k', 'alpha':0.5}
         assert vType in ['CC','F','E']
         assert self.dim == 3
 
+
+        import matplotlib.pyplot as plt
+        import matplotlib
+        from mpl_toolkits.mplot3d import Axes3D
+        import matplotlib.colors as colors
+        import matplotlib.cm as cmx
+
         szSliceDim = len(getattr(self, 'h'+normal.lower())) #: Size of the sliced dimension
         if ind is None: ind = int(szSliceDim/2)
         assert type(ind) in [int, long], 'ind must be an integer'
@@ -2202,6 +2230,25 @@ class TreeMesh(BaseTensorMesh, InnerProducts):
         if showIt: plt.show()
         return tuple(out)
 
+    def __len__(self): return self.nC
+
+    def __getitem__(self, key):
+        if isinstance( key, slice ) :
+            #Get the start, stop, and step from the slice
+            return [self[ii] for ii in xrange(*key.indices(len(self)))]
+        elif isinstance( key, int ) :
+            if key < 0 : #Handle negative indices
+                key += len( self )
+            if key >= len( self ) :
+                raise IndexError, "The index (%d) is out of range."%key
+
+            self._numberCells() # no-op if numbered
+            index   = self._i2cc[key]
+            pointer = self._asPointer(index)
+            return Cell(self, index, pointer)
+        else:
+            raise TypeError, "Invalid argument type."
+
 
 class Cell(object):
     def __init__(self, mesh, index, pointer):
@@ -2209,6 +2256,35 @@ class Cell(object):
         self._index   = index
         self._pointer = pointer
 
+    @property
+    def nodes(self):
+        """The node index in _gridN (this may include hanging nodes)."""
+        M = self.mesh
+        M._numberNodes()
+        p = self._pointer
+        i = self._index
+        w = M._levelWidth(p[-1])
+
+        if M.dim == 2:
+            n = [
+                    i,
+                    M._index([ p[0] + w, p[1]   , p[2]]),
+                    M._index([ p[0]    , p[1]+ w, p[2]]),
+                    M._index([ p[0] + w, p[1]+ w, p[2]]),
+                ]
+        elif self.dim == 3:
+            n = [
+                    i,
+                    M._index([ p[0] + w, p[1]    , p[2]    ,p[3]]),
+                    M._index([ p[0]    , p[1] + w, p[2]    ,p[3]]),
+                    M._index([ p[0] + w, p[1] + w, p[2]    ,p[3]]),
+                    M._index([ p[0]    , p[1]    , p[2] + w,p[3]]),
+                    M._index([ p[0] + w, p[1]    , p[2] + w,p[3]]),
+                    M._index([ p[0]    , p[1] + w, p[2] + w,p[3]]),
+                    M._index([ p[0] + w, p[1] + w, p[2] + w,p[3]]),
+                ]
+        return [M._n2i[_] for _ in n]
+
     @property
     def center(self):
         if getattr(self, '_center', None) is None:
@@ -2266,114 +2342,3 @@ class NotBalancedException(TreeException):
     pass
 class CellLookUpException(TreeException):
     pass
-
-if __name__ == '__main__':
-
-    def topo(x):
-        return np.sin(x*(2.*np.pi))*0.3 + 0.5
-
-    def function(cell):
-        r = cell.center - np.array([0.5]*len(cell.center))
-        dist = np.sqrt(r.dot(r))
-        # dist2 = np.abs(cell.center[-1] - topo(cell.center[0]))
-
-        # dist = min([dist1,dist2])
-        # if dist < 0.05:
-        #     return 5
-        if dist < 0.1:
-            return 5
-        if dist < 0.2:
-            return 4
-        if dist < 0.4:
-            return 3
-        return 2
-
-    # T = TreeMesh([[(1,128)],[(1,128)],[(1,128)]],levels=7)
-    # T = TreeMesh([128,128,128])
-    # T = TreeMesh([64,64],levels=6)
-    T = TreeMesh([4,4,4])
-    # T = TreeMesh([[(1,128)],[(1,128)]],levels=7)
-    # T.refine(lambda xc:2, balance=False)
-    # T._index([0,0,0])
-    # T._pointer(0)
-
-
-    # tic = time.time()
-    T.refine(function)#, balance=False)
-    # print time.time() - tic
-    # print T.nC
-    T.plotSlice(np.log(T.vol))#np.random.rand(T.nC))
-
-    plt.show()
-    blah
-
-    # T.plotImage(np.arange(len(T.vol)),showIt=True)
-
-    # print T.getFaceInnerProduct()
-    # print T.gridFz
-
-
-    # T._refineCell([8,0,1])
-    # T._refineCell([8,0,2])
-    # T._refineCell([12,0,2])
-    # T._refineCell([8,4,2])
-    # T._refineCell([6,0,3])
-    # T._refineCell([8,8,1])
-    # T._refineCell([0,0,0,1])
-    # T.__dirty__ = True
-
-
-    # print T.gridFx.shape[0], T.nFx
-
-
-
-    ax = plt.subplot(211)
-    ax.spy(T.edgeCurl)
-
-    # print Mesh.TensorMesh([2,2,2]).edgeCurl.todense()
-    # print T.edgeCurl.todense()
-    # print Mesh.TensorMesh([2,2,2]).edgeCurl.todense() - T.edgeCurl.todense()
-    # print T.gridEy - Mesh.TensorMesh([2,2,2]).gridEy
-
-    # print T.edge
-    # T.plotGrid(ax=ax)
-
-    # R = deflationMatrix(T._facesX, T._hangingFx, T._fx2i)
-    # print R
-
-    ax = plt.subplot(212)#, projection='3d')
-    ax.spy(Mesh.TensorMesh([2,2,2]).edgeCurl)
-
-    # ax = plt.subplot(313)
-    # ax.spy(T.faceDiv[:,:T.nFx] * R)
-
-
-    # T.balance()
-    # T.plotGrid(ax=ax)
-
-    # cx = T._getNextCell([0,0,1],direction=0,positive=True)
-    # print cx
-    # # print [T._asPointer(_) for _ in cx]
-    # cx = T._getNextCell([8,0,3],direction=0,positive=False)
-    # print T._asPointer(cx)
-    # cx = T._getNextCell([8,8,1],direction=1,positive=False)
-    # print cx, #[T._asPointer(_) for _ in cx]
-    # cm = T._getNextCell([64,80,4],direction=0,positive=False)
-    # cy = T._getNextCell([64,80,4],direction=1,positive=True)
-    # cp = T._getNextCell([64,80,4],direction=1,positive=False)
-
-    # ax.plot( T._cellN([4,0,1])[0],T._cellN([4,0,1])[1], 'yd')
-    # ax.plot( T._cellN(cx)[0],T._cellN(cx)[1], 'ys')
-    # ax.plot( T._cellN(cm)[0],T._cellN(cm)[1], 'ys')
-    # ax.plot( T._cellN(cy)[0],T._cellN(cy)[1], 'ys')
-    # ax.plot( T._cellN(cp[0])[0],T._cellN(cp[0])[1], 'ys')
-    # ax.plot( T._cellN(cp[1])[0],T._cellN(cp[1])[1], 'ys')
-
-
-
-
-
-    # print T.nN
-
-    plt.show()
-